Samsung Ht Bd7200 User Manual
Have a look at the manual Samsung Ht Bd7200 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 eng netWoRK Setup Press the buttons to select DHCP, then press the ENTER button. If DHCP is set to On, you can't select IP Address, Subnet Mask or Gateway. If DNS is set to Auto, you can’t select Primary/ Secondary DNS. Press the buttons to select a desired item, then press the ENTER button. Select an Access Point, and then press the ENTER button to display available list of APs. (It may take several seconds to search.) - When you select an AP and press the ENTER button, it tries to connect to the designated AP. - If successful, a notifi cation appears. (If selected AP shows a Lock icon, you may need to provide security authentication.) - Select your appropriate Security Access Point if it is known. If it is not, select WEP, WPAPSK or WPA2PSK from the list below and enter in the password. Keep trying each Security Access Point and enter the Password until a connection is made. - Enter in the Password then press the BLUE (D) button to connect to your access point (Router). For further details on AP security, refer to the AP’s (Router) user manual. If DHCP is set to Off and, DNS to Manual, enter your IP Address, Subnet Mask, Gateway and DNS Server. 5. M 6. • • Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Wireless Network Select Return Access Point : Not SelectedDHCP : On IP Address : 000 . 000 . 000 . 000 Subnet Mask : 255 . 255 . 255 . 000 Gateway : 000 . 000 . 000 . 000DNS : AutoDNS Server : 000 . 000 . 000 . 000SaveCancel Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Setup available Wireless Network Select Return Access Point : Not SelectedDHCP : Off IP Address : 000 . 000 . 000 . 000 Subnet Mask : 255 . 255 . 255 . 000 Gateway : 000 . 000 . 000 . 000DNS : ManualDNS Server : 000 . 000 . 000 . 000SaveCancel Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Wireless Network Select Return Access Point : Not SelectedDHCP : On IP Address : 000 . 000 . 000 . 000 Subnet Mask : 255 . 255 . 255 . 000 Gateway : 000 . 000 . 000 . 000DNS : AutoDNS Server : 000 . 000 . 000 . 000SaveCancel Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Access Point – Security Select Return OPENWEPWPAPSKWPA2PSK 123 Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Password 0-9Number Select Return 123 ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890−_+=.~!@#$%^&()/?|a Back Spaceb Space Cleard Save _ HT-BD7200_ELS_0317-2.indd 512009-03-20 �� 7:31:14
Network setup 52 SETTING UP THE NETWORK SETUP OPTIONS If DHCP is set to On and, DNS to Manual, enter your DNS Server. If DHCP is set to On and, DNS to Auto, you don’t need further or additional settings. When you select an item, use the number and buttons. If the automatic settings don’t work, contact your ISP. When done, use the buttons to select Save, then press the ENTER button. If you don’t want to save your work, use the buttons to select Cancel, then press the ENTER button. The IP address used in this manual is for illustrative purposes only. You must refer to the your network settings for the actual IP address. To obtain settings for IP address, Subnet mask, Gateway and DNS Server, check the network settings in your computer or contact your internet service provider. Proxy Setting A proxy server services requests by forwarding them to other servers. If you are required to confi gure the proxy setting, enter the settings specifi ed by the ISP. To setup, follow steps 1~3 on page 49. Press the buttons to select Proxy, then press the ENTER or button. Server Port User Password For more information, contact your ISP (Internet Service Provider). • • M 7. 8. M 4. • • • • M Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Setup not availableSetup available Wireless Network Select Return Access Point : Not SelectedDHCP : OnIP Address : 000 . 000 . 000 . 000 Subnet Mask : 255 . 255 . 255 . 000 Gateway : 000 . 000 . 000 . 000DNS : ManualDNS Server : 000 . 000 . 000 . 000SaveCancel Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Setup not available Wireless Network Select Return Access Point : Not SelectedDHCP : On IP Address : 000 . 000 . 000 . 000 Subnet Mask : 255 . 255 . 255 . 000 Gateway : 000 . 000 . 000 . 000DNS : ManualDNS Server : 000 . 000 . 000 . 000SaveCancel Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Network Selection : Cable Cable Network Wireless NetworkProxyNTP Server : OffNetwork Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection dVd Music Photo Setup Audio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup Network Selection : Cable Network Selection : Cable Cable Network Cable Network Wireless NetworkWireless NetworkProxyProxyNTP Server : OffNTP Server : OffNetwork Connection TestNetwork Connection TestBD-LIVE Internet BD-LIVE Internet : Allow (Vaild Only)ConnectionConnection dVddVddVd MusicPhoto Setup Proxy Select Return Proxy : OffServer : Port : 8080User : Password : SaveCancel HT-BD7200_ELS_0317-2.indd 522009-03-20 �� 7:31:23
53
eng
netWoRK Setup
NTP Server (Used to Retrieve Time Information from NTP Server)
To setup, follow steps 1~3 on page 49.
Press the buttons to select NTP Server, then press
the ENTER or button.
On : the player automatically connects to the Internet
server in order to adjust the time setting.
Off : the player does not connect to the Internet server
to adjust the time setting.
Network Connection Test
Use this menu to check whether your network connection is
working or not.
To setup, follow steps 1~3 on page 49.
Press the buttons to select Network Connection
Test, then press the ENTER or button.
BD-LIVE Internet Connection
The Blu-ray Home Cinema supports BD-LIVE which enables you to enjoy a variety of interactive service
contents provided by the disc manufacturer through a network connection. To enjoy this feature, you
must fi rst perform the LAN connection (see page 28) or Wireless Lan adapter connection to the USB slot.
* You must have a minimum 1 GB USB Memory device inserted in one of the USB slots in order to
download content from BD-LIVE.
The Internet connection may be restricted while you are using BD-LIVE contents.
To setup, follow steps 1~3 on page 49.
Press the buttons to select BD-LIVE Internet
Connection, then press the ENTER or button.
Allow (All) : The Internet connection will be allowed for
all BD-LIVE contents.
Allow (Valid Only) : The Internet connection will be
allowed only for BD-LIVE contents containing a valid
certifi cate.
Prohibit : No Internet connection will be allowed for
any BD-LIVE content.
What is a valid certifi cate? When the Blu-ray Home Cinema uses BD-LIVE to send the disc
data and request to the server to certify the disc, the server uses the transferred data to
check if the disc is valid and sends the certifi cate back to the player.
The Internet connection may be restricted while you are using BD-LIVE contents.
4.
•
•
4.
4.
•
•
•
M
Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Cable Network Wireless NetworkProxyNTP Server : Off Network Connection TestBD-LIVE Internet : Allow (Vaild Only)Connection
dVdOnOff
Music Photo Setup
Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Wireless NetworkProxyNTP Server : Off Network Connection Test BD-LIVE Internet : Allow (Vaild Only)Connection
dVd
Music Photo Setup
Audio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup
Wireless NetworkWireless NetworkProxyProxyNTP Server : Off NTP Server : Off Network Connection Test Network Connection Test BD-LIVE Internet BD-LIVE Internet : Allow (Vaild Only)ConnectionConnection
dVddVddVd
MusicPhoto Setup
Network Connection Test
Return
MaC address (00:10:18:00:00:70) ip address.Subnet Mask.gateway.dnS Server gateway ping internet Service test
your network is operating properly
Audio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
ProxyNTP Server : Off Network Connection TestBD-LIVE Internet : Allow (Vaild Only)ConnectiondVdAllow(All)Allow(Valid Only)Prohibit
Music Photo Setup
HT-BD7200_ELS_0317-2.indd 532009-03-20 �� 7:31:31
BD data management
54
BD Data (stored in external USB fl ash memory) is Blu-ray Disc content such as trailers and other
special features downloaded from the BD-LIVE service or Blu-ray Discs.
* You must have a minimum 1GB USB Memory device inserted in one of the USB slots in order to download
content from BD-LIVE.
SYSTEM DEVICE MANAGEMENT
You can manage user data stored in BD data.
With the unit in Stop mode, press the MENU button.
Press the buttons to select Setup, then press the
ENTER or button.
Press the buttons to select System Setup, then press
the ENTER or button.
Press the buttons to select BD Data Management,
then press the ENTER or button.
- To delete the fl ash memory -
Press the ENTER button to select BD Data Delete.
The message "All BD data will be deleted. Do you want to
continue?" will be displayed.
Press the button to select Yes, then press the
ENTER button.
Description of Device(Storage) Information on the Player
Total Size : Total size of the Device(Storage).
Available Size : Available size of the Device(Storage).
Memory size information on the current device(storage) is located to the right of the BD
Data Management menu.
In the external memory mode, disc playback will be stopped if you disconnect the USB
device in the middle of the playback.
We recommend using an USB device that supports USB 2.0 protocols, FAT32 format and
4MB or more read /write speed.
The Resume Play function may not work after formatting the storage device.
1.
2.
3.
4.
1.
2.
•
•
M
, then press
Music Photo Setup
MusicPhoto SetupSystem Setup language Setupaudio Setupdisplay SetuphdMi Setupnetwork Setupparental Setup
time ZoneClock Setpower on/off sound : on
Bd data Management divX(R) RegistrationSystem update
dVd
System Setup language Setupaudio Setupdisplay SetuphdMi Setupnetwork Setupparental Setup
time ZoneClock Setpower on/off sound : on
Bd data Management divX(R) RegistrationSystem update
dVd
Music Photo Setup BD Data Management
Select Return
Current Device : External Flash MemoryTotal Size : 953MB Available Size : 889MB
BD Data Delete
HT-BD7200_ELS_0317-2.indd 542009-03-20 �� 7:31:36
55
EnG
● SyStEm uPGRaDE
System upgrade
Samsung may offer upgrades to your Blu-ray Home Cinema's fi rmware in the future. To upgrade this fi rmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest fi rmware.
You can use a CD-R or a USB fl ash drive to perform the fi rmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
Connect the network (see pages 28~29) and follow the steps below.
FIRMWARE UPGRADE
With the unit in Stop mode/No Disc mode, press the
MENU button.
Press the ▲▼ buttons to select Setup, then press the
ENTER or + button.
Press the ▲▼ buttons to select System Setup, then
press the ENTER or + button.
Press the ▲▼ buttons to select System Update, then
press the ENTER or + button.
The player will check the cable or network connection
status automatically. The connection checking window will
be displayed.
If the upgrade is possible : You will see information on the
current and new versions of fi rmware in a message box.
If the upgrade is not possible : You will see the following
description in the message box.
If the cable is not connected :
“Ethernet cable is not connected. Please, check the
Ethernet cable”
If the network connection has failed :
“This system can not connect to internet for update.
Please, check the network setup”
If no latest version is released (the latest version has
been already installed) :
"The latest version of the fi rmware is already installed.
There is no need to update."
If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the
unit to perform the update.
If the server service is not available :
“ Update Server is under maintenance. Please try again
later.”
1.
2.
1.
2.
3.
4.
5.
@
@
•
•
•
•
•
DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Power On/Off sound : OnBD Data MenagementDivX(R) Registration
System Update +
Music Photo Setup System Update
This system can not connectto internet for update.Please, check the network setup.
OK
1234
Music
DvD
Power On/Off sound : OnPower On/Off sound : OnMusicPower On/Off sound : OnPower On/Off sound : OnMusic
DvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Power On/Off sound : OnBD Data MenagementDivX(R) Registration
System Update +
Music Photo Setup System Update
The new update data was found.Current Version : XXXXXNew Version : XXXXX
1234
CancelStart
Power On/Off sound : OnPower On/Off sound : On
DvD
Power On/Off sound : OnPower On/Off sound : OnPower On/Off sound : OnPower On/Off sound : On
DvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Power On/Off sound : OnBD Data MenagementDivX(R) Registration
System Update +
Music Photo Setup System Update
Now, Checking.Please wait...
1234
Music
DvD
Power On/Off sound : OnPower On/Off sound : OnMusic Power On/Off sound : OnPower On/Off sound : On Power On/Off sound : On Power On/Off sound : On Music
DvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
Power On/Off sound : OnBD Data MenagementDivX(R) Registration
System Update +
Music Photo Setup
Power On/Off sound : OnPower On/Off sound : On
DvD
Power On/Off sound : OnPower On/Off sound : OnPower On/Off sound : OnPower On/Off sound : On
DvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup
_
Music Photo Setup
HT-BD7200_ELS_0317-3.indd 552009-03-20 �� 7:33:14
System upgrade 56 FiRmwaRE uPGRaDE To perform the system upgrade, press the _ + buttons to select Start and then press the ENTER button. The system update gets started. If you select Cancel during the download process, you are prompted to confi rm your selection in a message box. If you want to cancel the download, select Yes and press the ENTER button. Verifi cation will proceed. When download is done, the fi rmware update process will begin automatically. When the installation is done, the player will automatically turn off in 5 seconds. All settings will revert to the factory settings. The next time you start the system and you will see the menu language selection window. If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button. You will see a confi rmation message.Selecting Yes will end the upgrade process, and selecting No will continue the upgrade process. When the system upgrade is done, check the fi rmware details in the System Upgrade menu. Do not turn off the player during the System Upgrade, as it may cause the player to not work properly. You must use a USB Flash Drive to do software upgrades using the USB Host jack.Other USB devices(ex. MP3 player) are not guaranteed to work. There should be only one fi rmware upgrade fi le in USB fl ash drive for the player to properly perform an upgrade. Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected. 6. 7. 8. 9. 10. M DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Power On/Off sound : OnBD Data MenagementDivX(R) Registration System Update + DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Power On/Off sound : OnBD Data MenagementDivX(R) Registration System Update + DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Power On/Off sound : OnBD Data MenagementDivX(R) Registration System Update + DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Power On/Off sound : OnBD Data MenagementDivX(R) Registration System Update + DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup Power On/Off sound : OnBD Data MenagementDivX(R) Registration System Update + Music Photo Setup Music Photo Setup Music Photo Setup Music Photo Setup Music Photo Setup System Update The new update data was found.Current Version : XXXXXNew Version : XXXXX 1234 StartCancel System Update Verifying update dataPlease wait. 4132 System Update Downloading update data...Please, do not turn off the power. 34 Cancel 12 60% System Update Do you want to cancel the update operation? 3412 YesNo System Update Firmware Update.Now, Processing...Please, do not turn off the power.The power will be off automatically after update is fi nished. 3142 HT-BD7200_ELS_0317-3.indd 562009-03-20 �� 7:33:24
57 EnG ● SyStEm uPGRaDE SYSTEM INFORMATION When the fi rmware upgrade is done, check the fi rmware details by following the steps below. With the unit in Stop mode/No Disc mode, press the MENU button. Press the ▲▼ buttons to select Setup, then press the ENTER or + button. Press the ▲▼ buttons to select System Setup, then press the ENTER or + button. Press the ▲▼ buttons to select System Information, then press the ENTER or + button. You can see detailed information about the current fi rmware. Press the ENTER button to select OK. System Setup menu will be displayed. FIRMWARE UPGRADE NOTIFICATION This popup menu appears when a newer fi rmware version is available from SAMSUNG's update server than what is currently on the Blu-ray Home Cinema. Yes : Select this to upgrade now. No : Select this if you plan to upgrade later. DIVX (R) REGISTRATION Please use the Registration code to register this Home Cinema System with the DivX(R) Video On Demand format. For more information, visit www.divx.com/vod 1. 2. 3. 4. 5. • • System Update New Firmware is available.Do you want to update now? YesNo When the fi rmware upgrade is done, check the fi rmware details by following the steps below. DvD When the fi rmware upgrade is done, check the fi rmware details by following the steps below. DvDDvDDvDSystem Setup Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup __ Music Photo Setup DvDDvDDvDDvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup System Information +Time ZoneClock SetPower On/Off sound : On BD Data ManagementDivX(R) RegistrationSystem Update Music Photo Setup DvDSystem Setup _Language SetupAudio SetupDisplay SetupHDMI SetupNetwork SetupParental Setup System Information +Time ZoneClock SetPower On/Off sound : On BD Data ManagementDivX(R) RegistrationSystem Update DvDDvDDvDSystem Setup System Setup _Language SetupLanguage SetupAudio SetupAudio SetupDisplay SetupDisplay SetupHDMI SetupHDMI SetupNetwork SetupNetwork SetupParental SetupParental Setup System Information System Information +Time ZoneTime ZoneClock SetClock SetPower On/Off sound : On Power On/Off sound : On BD Data ManagementBD Data ManagementDivX(R) RegistrationDivX(R) RegistrationSystem Update System Update Music Photo Setup System Information S/W : XXXXXXXLoader : XXXXXXXRegion : B/2 (BD/DVD)ESN : XXXX OK HT-BD7200_ELS_0317-3.indd 572009-03-20 �� 7:33:32
Watching a movie 58 uSinG thE DiSPlay Function hZCV During playback, press the INFO button on the remote control. If the Blu-ray Disc has the PIP feature, press the inFo button in the PIP section to display PIP-related information. Press the ▲▼ buttons to select the desired item. Press the _ + buttons to make the desired setup change and then press the ENTER button. You may use the number buttons of the remote control to directly access a title, chapter or to start the playback from a desired time. To make the screen disappear, press the INFO button again. If you are playing contents from the info menu, some functions may not be enabled depending on the disc. Title : To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a Blu-ray Disc/DVD, each movie will be identifi ed as a Title. Chapter: Most Blu-ray Disc/DVD discs are recorded in chapters so that you can quickly fi nd a specifi c chapter. Audio : Refers to the fi lm's soundtrack language. A Blu-ray Disc can contain up to 32 audio languages and a DVD up to 8. Playing Time : Allows playback of the fi lm from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs. Subtitle : Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A Blu-ray Disc can contain up to 255 subtitle languages, and a DVD up to 32. Angle : When a Blu-ray Disc/DVD contains multiple angles of a particular scene, you can use the ANGLE function. PIP Video/ PIP Audio : You can make PIP Video or PIP Audio settings if the current title of a Blu-ray Disc appears in the PIP section. The PIP Video / PIP Audio options, however, will be disabled with a Blu-ray Disc that does not support the PIP feature. 1. • 2. 3. • 4. M DvD-video info change Select titlechapterPlaying timeaudioSubtitleangle : 001/006: 001/016: 00:04:17: EnG multi ch: off: 01/01 DvD-video info change Select titlechapterPlaying timeaudioSubtitleanglePiP videoPiP audio : 001/006: 001/016: 00:04:17: EnG multi ch: off: 01/01: 01/01: 1/1 EnG 2ch HT-BD7200_ELS_0317-3.indd 582009-03-20 �� 7:33:33
59
EnG
● watchinG a moviE
uSinG thE DiSc mEnu & PoPuP/titlE mEnu
using the Disc menu hZ
During playback, press the DISC MENU button on the
remote control.
Press the ▲▼_ + buttons to make the desired selection,
then press the + or ENTER button.
The Disc menu setup items may vary from disc to disc.
The Disc Menu may not be available, depending on the disc.
using the title menu Z
During playback, press the TITLE MENU button on the remote control.
Press the ▲▼_ + buttons to make the desired selection, then press the ENTER button.
The Title menu setup options may vary from disc to disc.
The Title Menu may not be available, depending on the disc.
Title Menu will only be displayed if there are at least two titles on the disc.
Playing the title list gf
With the unit in Stop mode/Playback mode, press the
DISC MENU or TITLE MENU button.
Press the ▲▼ buttons to select an entry you want to play
from Title List, then press the + or ENTER button.
The selected entry (title) will be played back.
- Go to Playlist -
To go to the Playlist, press the RED(A) button.
using the Popup menu h
During playback, press the POPUP MENU button on the
remote control.
Press the ▲▼_ + buttons or ENTER button to select
the desired menu.
The Popup menu setup options may vary from disc to
disc.
The Popup Menu may not be available, depending on the disc.
1.
2.
•
M
1.
2.
•
M
1.
2.
1.
2.
•
M
3 4 5 6 7 8 9 10 11 12 13 14 15
▼
Play moviE lanGuaGES ScEnE SElEctionS PREviEwS
The Popup Menu may not be available, depending on the disc.
3 4 5 6 7 8 9 10 11 12 13 14 15
▼
main mEnu auDio SEt uP SuBtitlES ScEnE SElEctionS
CDBD-RE Video Music Photo Setup
title 008 00:04:36title 009 00:04:17title 010 00:04:11title 011 00:04:07title 012 00:04:46title 013 00:04:21title 014 00:03:43
_
\
Page
HT-BD7200_ELS_0317-3.indd 592009-03-20 �� 7:33:39
Watching a movie 60 REPEat Play Repeat the current chapter or title. Repeat playback hgfZCV During playback, press the REPEAT button on the remote control. Repeat screen appears. Press the ▲▼ buttons to select Chapter or Title. Blu-ray Disc/DVD repeats play by chapter or title. To return to normal play, press the REPEAT button again, then press the ▲▼ buttons to select Off. The Repeat function may not be available, depending on the disc. using the a-B Repeat function hgfZCV Press the REPEat a-B button on the remote control during playback. Press the REPEat a-B button at the point where you want repeat play to start (A). Press the REPEat a-B button at the point where you want repeat play to stop (B). To return to normal play, press the cancEl button. Point B cannot be set until 5 seconds of playback has elapsed from point A. 1. 2. • 3. M 1. 2. 3. 4. M Repeat off ▶ Repeat a-B00:18:41 / 01:34:37 REPEAT A B Off Exit DVD HT-BD7200_ELS_0317-3.indd 602009-03-20 �� 7:33:40