Samsung Ht Bd8200 User Manual

							
41
ENG
●  DISPLAY SETUP
Movie Frame (24 Fs)
Movies are usually fi lmed at 24 frames per second. Some 
Blu-ray Discs have the capability of playing back at this frame 
rate. Setting the Movie Frame (24Fs) feature to ON allows you 
to adjust the Blu-ray Home Theater's HDMI output to 24 
frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only on a TV 
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI 
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie m\
aterial (24 frame) and Video 
material (30 frame). When the setting switches between Movie (24 fram\
e) and Video (30 frame), 
the screen may blink for a few seconds.
Resolution 
Sets the output resolution of the HDMI and Composite video 
signal.
The number in 480i, 480p, 720p, 1080p and 1080i 
indicates the number of lines of video. The i and p indicate 
interlace and progressive scan, respectively.
- BD Wise :   Automatically sets the optimal resolution when 
connected via HDMI to a TV with the BD Wise  
 feature. (The BD Wise menu item appears only 
if BD Wise is set to On.)
-   1080p :   Outputs 1080 lines of progressive video (HDMI only).
-   1080i :   Outputs 1080 lines of interlaced video (HDMI only).
-   720p :   Outputs 720 lines of progressive video (HDMI only).
-   480p :   Outputs 480 lines of progressive video (HDMI only).
-   480i :   Outputs 480 lines of interlaced video (Composite only).
If the connected TV does not support Movie Frame or the 
selected resolution, you will see the following message:
If you select  Yes and the resolution is not supported, the TV's 
screen will be blank. Please wait for 15 seconds and 
the resolution will revert to the previous value automatically.
If the screen is blank, press and hold the STOP  ( ) button on the front of the player for 
more than 5 seconds (no disc inserted). All settings are restored to t\
he factory default. 
Follow the steps on the previous page to access each mode and select the\
 Display Setup 
that your TV will support.
When the factory default settings are restored, all the user data stored\
 in the BD data will 
be deleted.
•M

TV Aspect  :  16:9 Normal Movie Frame (24 Fs)  :  Off                          ►Resolution : 1080p
Progressive Mode  :  Auto
Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In Standby
System 
Language  
Audio 
        
Display               ◄ HDMI 
Network 
Parental DVDDVDOnOff
 Music  Photo   
                             
             Setup 
TV Aspect  :  16:9 Normal Movie Frame (24 Fs)  :  OffResolution : 1080pProgressive Mode  :  Auto
Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In Standby
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD1080p1080i720p
480p
480i
 Music  Photo   
                             
             Setup 
TV Aspect  :  16:9 Normal Movie Frame (24 Fs)  :  OffResolution  :  1080p                     ►Progressive Mode  :  Auto
Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In Standby
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD
 Music  Photo   
                             
             Setup If no pictures are shown after the selection, 
please wait for 15 seconds. And then, 
the resolution will be reverted 
to the previous value automatically.
Would you like to make a selection?
YesNo
HT-B D 8200_X AA_0723-2 .in dd   4 1HT-BD8200_XAA_0723-2.indd   412009-0 7-2 3     1 1:4 6:1 52009-07-23    11:46:15
 
						

							
Display setup
42
SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS
Resolution according to the output mode
Blu-ray Disc playback
Output
Setup HDMI COMPOSITE
1080p, Movie Frame(24Fs) off1080p@60F 480i
1080p/1080i, Movie Frame (24Fs) on1080p@24F 480i
1080i, Movie Frame (24Fs) off1080i 480i
720p 720p 480i
480p 480p 480i 480i 480p 480i
DVD playback
Output
Setup HDMI COMPOSITE
1080p 1080p@60F 480i 1080i 1080i 480i720p 720p 480i
480p 480p 480i 480i 480p 480i
This player has the HDMI Auto Detect Feature. When the player is fi rst connected to a TV 
via HDMI, the player's output will be set automatically to HDMI.
If the HDMI Auto Detection feature does not work, you can't select the 1\
080p resolution or 
Movie Frame (24Fs).
The Blu-ray Disc must have the 24 frame feature in order to use the Movi\
e Frame (24Fs) 
mode.
•
•
M


H T-B D 8200_X AA_0723-2 .in dd   4 2HT-BD8200_XAA_0723-2.indd   422009-0 7-2 3     1 1:4 6:2 02009-07-23    11:46:20
 
						

							
43
ENG
●  DISPLAY SETUP
Progressive Mode 
The Progressive Mode helps to improve picture quality when 
viewing 480i resolution DVD discs. 
Auto  : Select this to have the player automatically set the 
best picture for the DVD you're watching.
Video  : Select this for the best picture from Concert or TV 
show DVDs .
Frame & Field bar
Still Mode
Set the Auto, Field or Frame setting for the best possible still 
picture (pause mode) from a DVD.
Auto : Select this setting to have the player automatically 
display the best Still picture depending on the content.
Field Mode : Select this when pausing a scene with a lot of 
action.
Frame Mode : Select this to increase the resolution of the 
Still picture. 
Screen Message
On  : Displays messages related to operation mode.
Off  : Does not display messages related to operation mode.
Light Effect
Light Effect mode adds moody lighting under the main unit.
Off  : Always off
In Standby  : Lights on while in stand-by
Playing  : Off in stand-by mode, lights on while playing
Always  : Always on
•
•
•
•
•
•
•
•
•
•
•
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD
TV Aspect  :   16:9 Normal
Movie Frame (24 Fs)  :   Off
Resolution :  1080p
Progressive Mode  :  PCM 
►Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In StandbyAuto
Video
 Music  Photo   
                             
             Setup 
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD
Movie Frame (24 Fs)  :  OffResolution : 1080p
Progressive Mode  :  Auto
Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In Standby
Auto
Field
Frame
 Music  Photo   
                             
             Setup 
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD
Resolution : 1080p
Progressive Mode  :  Auto
Still Mode  :  Auto
Screen Message
Light Effect  :  In Standby
OnOff
 Music  Photo   
                             
             Setup 
System 
Language  
Audio         
Display               ◄ HDMI 
Network 
Parental DVDDVD
Progressive Mode  :  Auto
Still Mode  :  Auto
Screen Message  :  On
Light Effect  :  In Standby Music  Photo   
                             
             Setup 
OffIn Standby
Playing
Always
HT-B D 8200_X AA_0723-2 .in dd   4 3HT-BD8200_XAA_0723-2.indd   432009-0 7-2 3     1 1:4 6:2 02009-07-23    11:46:20
 
						

							
HDMI setup
44
SETTING UP THE HDMI SETUP OPTIONS
You can set the HDMI options such as Anynet+, HDMI Format, BD Wise, HDMI\
 Audio.With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  HDMI, then press the 
ENTER  or 
► button.
HDMI setup menu will be displayed.
Press the 
▲▼ buttons to select the desired display option, 
then press the  ENTER or 
► button.
Press the  RETURN or ◄ button to return to the previous menu. Press the  MENU button to exit the menu.
Anynet+ (HDMI-CEC) Samsung products only
What is Anynet+?
Anynet+ is a convenient function that offers linked operations with othe\
r Samsung products with the 
Anynet+ feature.
You can operate this unit using a Samsung TV remote control or power on \
your Samsung TV and Home 
theater and start disc playback simply by pressing the  PLAY button on the TV’s remote.
This function is not available if the HDMI cable does not support CEC.
To use Anynet+ Connect the Blu-ray Home Theater to a Samsung TV with an HDMI cable. (S\
ee pages 22~23)
Set the Anynet+ function on your TV. (See the TV instruction manual for\
 more information.)
Anynet+ Functions One touch play
You can power on your Samsung TV and Home Theater, and play the disc in \
this unit simply by 
pressing the  PLAY button on the TV’s remote.
One touch watching
  Select “Watching Blu-ray Home Theater” or “Connected to Blu-ray\
 Home Theater” (depending on 
your TV's menu) in the Anynet+ menu on the TV. The Blu-ray Home Theater\
 will automatically turn on 
and the TV will be switched to HDMI mode.
Remote control Link
You can operate this player with your Samsung TV remote control.
Available buttons on the Samsung TV remote: These buttons work the same \
as this Blu-ray Home 
Theater's remote control.
- Playback control buttons : 
    
- Menu operation button :      
- Numeric buttons : ~
1.
2.
3.
4.
M
M
1.
2.
•
•
•
•
Language  
Audio          
Display       
HDMI 
Network 
Parental 
D VDDVD◄◄
 Music  Photo   
                             
             Setup 
HT-B D 8200_X AA_0723-2 .in dd   4 4HT-BD8200_XAA_0723-2.indd   442009-0 7-2 3     1 1:4 6:2 62009-07-23    11:46:26
 
						

							
45
ENG
●  HDMI SETUP
TV Anynet+ Menu
When you press the Anynet+ button on your Samsung TV's remote 
control, the following On-Screen Display (OSD) will be shown.
Blu-ray Home Theater Menu
- When playing a movie : brings up the disc’s menu (same  
 as  DISC MENU  button on the Blu-ray Home Theater’s  
   remote control)
- 
In Stop mode : brings up the SETUP menu (same as the  
  MENU  button on the Blu-ray Home Theater’s remote    
 control.)
 Blu-ray Home Theater Operation Menu
- When playing a DVD VIDEO, DVD-RW/-R, BD-ROM, BD-RE : 
   shows INFO OSD (same as  INFO button on the player's remote control)
These menus may look different depending on your Samsung TV.
HDMI Format
You can optimize the HDMI output for connection to a TV or 
Monitor.
TV  : Select if connected to a TV via HDMI. 
Monitor  : Select if connected to a Monitor via HDMI.
  If the player is connected to a TV, the Monitor  
  option is unavailable.
A TV or monitor has to be connected to the player before you select this\
 option.
•
•
M
•
•
M
THEATERn
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver      : Off
Setup
 Move           Enter Exit
BD Wise Samsung products only
BD Wise is Samsung's latest inter-connectivity feature.
When you connect Samsung products with BD-Wise to each 
other via HDMI, the optimum resolution will be set 
automatically.
On  : The original resolution of the BD/DVD disc will be 
output to the TV direct.
Off  : The output resolution will be fi xed according to the 
Resolution previously set, regardless of the resolution of the 
disc. 
If you want to change the resolution when you set BD Wise on, you must s\
et BD Wise to Off in advance.
If you set BD Wise to off, the resolution of the connected TV will be au\
tomatically adjusted to its maximum 
resolution.
If the player is connected to a device that does not support BD Wise, yo\
u can not use the BD wise function.
For a proper operation of BD Wise, set BD Wise to ON in the menus of the\
 player and the TV.
•
•M



Language  
Audio 
        
Display     
  HDMI                    ◄Network 
Parental StupDVDDVDAnynet + (HDMI-CEC) : OnHDMI Format : Tv
BD Wise  :  On
HDMI Audio  :  OffTVMonitor
 Music  Photo   
                             
             Setup 
Language  
Audio         
Display     
  HDMI                    ◄Network 
Parental StupDVDDVD
Anynet + (HDMI-CEC)   : On
HDMI Format  :  TV
BD Wise  :  PCM ►HDMI Audio  :  OffOnOff
 Music  Photo   
                             
             Setup 
HT-B D 8200_X AA_0723-2 .in dd   4 5HT-BD8200_XAA_0723-2.indd   452009-0 7-2 3     1 1:4 6:2 82009-07-23    11:46:28
 
						

							
HDMI setup
46
SETTING UP THE HDMI SETUP OPTIONS
HDMI Audio
The audio signals transmitted over the HDMI Cable can be 
toggled ON/OFF.
  On :    
Both video and audio signals are transmitted over the 
HDMI connection cable, and audio is output through 
your TV speakers only.
 Video is transmitted over the HDMI connection cable 
only, and audio is output through the Blu-ray Home 
Theater speakers only.
  The default setting of this function is HDMI Audio Off.
  HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.M

Language  
Audio         
Display     
  HDMI                    ◄Network 
Parental StupDVDDVD
Anynet + (HDMI-CEC)   : OnHDMI Format  :  TV
BD Wise  :  On 
HDMI Audio  :  OffOnOff
 Music  Photo   
                             
             Setup 
HT-B D 8200_X AA_0723-2 .in dd   4 6HT-BD8200_XAA_0723-2.indd   462009-0 7-2 3     1 1:4 6:3 22009-07-23    11:46:32
 
						

							
47
ENG
●  PARENTAL SETUP
Parental setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with Blu-ray Disc/DVDs t\
hat have been assigned a rating which 
helps you control the types of Blu-ray Disc/DVDs that your family watche\
s. There are up to 8 rating levels on a disc.
hZ
With the unit in Stop mode, press the  MENU button.
Press the 
▲▼◄► buttons to select  Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Parental, then press the 
ENTER  or
 ► button.
When you operate your Blu-ray Home Theater for the fi rst 
time, the “Enter New password.” message will be 
displayed.
Enter the 4-digit password using the number buttons on 
the remote control.
The “Confi rm the password.” message will be displayed. 
Enter your password again.
Press the  ENTER or
 ► button to select Parental Lock.
Press the 
▲▼ buttons to select  On or  Off , then press the 
ENTER  button.
Press the  RETURN or ◄ button to return to the previous menu. Press the  MENU button to 
exit the menu.
1.
2.
3.
4.
5.
6.M
Display       HDMI         
Network 
Parental              
◄D
VDDVD
 Music  Photo   
                             
             Setup 
Display       HDMI        
Network 
Parental 
DVDDVD
 Music  Photo   
                             
             Setup Parental Setup
Enter New password.
ReturnNumber0.9
Display       HDMI        
Network 
Parental 
DVDDVD
 Music  Photo   
                             
             Setup Parental Setup
Confi rm the password.
ReturnNumber0.9
Display       HDMI         
Network 
Parental              
◄DVDDVDParental Lock  : Off ►Rating Level  :  1(Kids)
New Password
 Music  Photo   
                             
             Setup 
HT-B D 8200_X AA_0723-2 .in dd   4 7HT-BD8200_XAA_0723-2.indd   472009-0 7-2 3     1 1:4 6:3 42009-07-23    11:46:34
 
						

							
Parental setup
48
SETTING UP THE PARENTAL LOCK
If you forgot your password
Remove the disc.
Press and hold the STOP ( ) button on the front panel for 5 seconds or more.
All settings will revert to the factory settings.
When the factory default settings are restored, all the user data stored\
 in the BD data will 
be deleted.
Setting the Rating Level
Press the ▲▼ buttons to select  Rating Level, then press 
the  ENTER  or
 ► button.
Press the 
▲▼ buttons to select the rating level you want, 
then press the  ENTER button. For example, if you select 
up to Level 6, discs that contain Level 7, 8 will not play. 
A larger number indicates that the program is intended for 
adult use only.
Level 8 is the most restrictive and Level 1 is the least.
Changing the Password
Press the ▲▼ buttons to select  New Password, then 
press the  ENTER or
 ► button.
Enter the 4-digit password using the number buttons on 
the remote control. The “Enter New password.” message 
will be displayed.
Enter your password again using the number buttons on 
the remote control.
1.
2. •
M
1.
2.
1.
2.
3.Display       HDMI         
Network 
Parental              
◄DVDDVDParental Lock  :  Off 
Rating Level  :  1(Kids)                ►New Password8(Adults)
7
6
5
4
3
2
1(Kids)
 Music  Photo   
                             
             Setup 
Display       HDMI         
Network 
Parental              
◄DVDDVD
Parental Lock  :  Off 
Rating Level  :  1(Kids)               
New Password                                      
►
 
Music  Photo   
                             
             Setup 
Display       HDMI         
Network 
Parental              
◄DVDDVD
Parental Lock  :  Off 
Rating Level  :  1(Kids)               
New Password                                      
►
 
Music  Photo   
                             
             Setup Parental Setup
Enter New password.
ReturnNumber0.9
Display       HDMI         
Network 
Parental              
◄DVDDVD
Parental Lock  :  Off 
Rating Level  :  1(Kids)               
New Password                                      
►
 
Music  Photo   
                             
             Setup Parental Setup
Confi rm the password.
ReturnNumber0.9
HT-B D 8200_X AA_0724-2 .in dd   4 8HT-BD8200_XAA_0724-2.indd   482009-0 7-2 4     1 1:1 0:4 22009-07-24    11:10:42
 
						

							
49
ENG
●  NETWORK SETUP
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings\
 on your computer or contact 
your Internet provider.
To set the network of your Blu-ray Home Theater, follow the 
steps below.
With the unit in Stop mode/No Disc mode, press the 
MENU  button.
Press the 
▲▼◄► buttons to select  Setup, then press 
the  ENTER  or 
► button.
Press the 
▲▼ buttons to select  Network, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select the desired network 
option from the options described below, then press the  ENTER or 
► button.
Press the 
▲▼ buttons to select the desired item, then press the  ENTER button.
Each network option is described in detail below.
Network Selection 
Select Cable or Wireless as the method to connect to the 
network.
To setup, follow steps 1~3 above.
Press the 
▲▼ buttons to select  Network Selection , then 
press the  ENTER or 
► button.
Cable  : Select this to connect to the network using a 
cable. (see page 28)
Wireless  : Select this to connect to the network 
wirelessly. (see page 29)
Cable Network
To setup, follow steps 1~3 above.
Press the 
▲▼ buttons to select  Cable Network, then 
press the  ENTER or 
► button.
Press the 
▲▼ buttons to select  DHCP, then press the 
ENTER  button.
If DHCP is set to  On, you can't select IP Address, 
Subnet Mask or Gateway.
If DNS is set to  Auto, you can’t select Primary/ 
Secondary DNS.
1.
2.
3.
4.
5.
4.
•
•
4.
5.M

Display       HDMI         Network              ◄   Parental     D VDDVDNetwork Selection :  Cable Cable Network                                            ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE  
Connection  :  Allow (Valid Only)
 Music  Photo   
                             
             Setup 
 
DVDDVD
Display       HDMI         Network              ◄   Parental     
 Music  Photo   
                             
             Setup 
Display       HDMI         Network              ◄   Parental     DVDDVDNetwork Selection :  Cable ►Cable Network
Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE  
Connection  :  Allow (Valid Only)
 Music  Photo   
                             
             Setup 
Display       HDMI         Network              ◄   Parental    Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
ConnectionD VDDVD
 Music  Photo   
                             
             Setup 
◄
Cable Network
   Select  Return
DHCP   :   On
IP Address  :  000 . 000 . 000 . 000  
Subnet Mask  :  255 . 255 . 255 . 000  
Gateway  :  000 . 000 . 000 . 000
DNS : Auto
Primary DNS  :   000 . 000 . 000 . 000  
Secondary DNS  :   000 . 000 . 000 . 000  
SaveCancel
HT-B D 8200_X AA_0723-2 .in dd   4 9HT-BD8200_XAA_0723-2.indd   492009-0 7-2 3     1 1:4 6:4 52009-07-23    11:46:45
 
						

							
Network setup
50
SETTING UP THE NETWORK SETUP OPTIONS
Press the ▲▼ buttons to select a desired item, then 
press the  ENTER button.
If DHCP is set to  Off and, DNS to Manual, enter 
your IP Address, Subnet Mask, Gateway and 
Primary DNS settings (Secondary DNS is optional).
If DHCP is set to  On and, DNS to Manual, enter 
your Primary DNS setting (Secondary DNS is 
optional).
If DHCP is set to  On and, DNS to Auto, you don’t 
need further or additional settings. 
When you select an item, use the number 
and  ▲▼◄ ►  buttons.
If the automatic settings don’t work, contact 
your ISP.
When done, use the ▲▼ buttons to select  Save, then press the  ENTER button.
If you don’t want to save your work, use the 
▲▼◄ ► buttons to select  Cancel, then press the 
ENTER  button.
The IP address used in this manual is for illustrative purposes only. Yo\
u must refer to your 
network settings for the actual IP address.
To obtain settings for IP address, Subnet mask, Gateway and Primary DNS,\
 check the 
network settings in your computer or contact your internet service provi\
der.
Wireless Network
To setup, follow steps 1~3 on page 49.
Press the 
▲▼ buttons to select  Wireless Network , 
then press the  ENTER or 
► button.
6.
•
•
•
M

7.
8.
M

4.
Setup available
 Music  Photo   
                             
             Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄D VDDVD
Cable Network
   Select   Return
DHCP   :   Off
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Setup not available Setup available
 Music  Photo   
                             
             Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄D VDDVD
Cable Network
   Select   Return
DHCP   :   On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Setup not available
 Music  Photo   
                             
             Setup Audio
Display       HDMI         Network               ◄   Parental     
Network Selection :  Cable 
Cable Network                                     ►Wireless Network
Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet  
: Allow (Vaild Only)
Connection◄D VDDVD
Cable Network
   Select   Return
DHCP   :   On
IP Address  :  000 . 000 . 000 . 000 
Subnet Mask  :  255 . 255 . 255 . 000 
Gateway  :  000 . 000 . 000 . 000
DNS : Auto
Primary DNS  :   000 . 000 . 000 . 000 
Secondary DNS  :   000 . 000 . 000 . 000 
YesNo
Audio
Display       HDMI         Network               ◄   Parental     
Network Selection : Wireless 
Cable Network                                     
Wireless Network                                
►Proxy
NTP Server  :  Off
Network Connection Test
BD-LIVE Internet   : Allow (Vaild Only)
ConnectionD VDDVD
 Music  Photo   
                             
             Setup 
HT-B D 8200_X AA_0723-2 .in dd   5 0HT-BD8200_XAA_0723-2.indd   502009-0 7-2 3     1 1:4 6:5 12009-07-23    11:46:51