Samsung Ht C5500 User Manual
Have a look at the manual Samsung Ht C5500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English 51 04 Basic Functions If there is an undesired track in the playlist, press the YELLOW(C) button again. The selected track will be deleted. Press the ENTER button to play the selected tracks. The selected track will automatically play. s Pause Tools r Return + 00:08 / 05:57 1/1 TRACK 001 05:57 TRACK 00204:27 TRACK 00304:07 Playlist TRACK 001 To go to the Music List, press the STOP ( ) or RETURN button. To go to the Playlist, press the ENTER button. NOTE You can create a playlist with up to 99 tracks on Audio CD (CD-DA). 4. 5. 6. 7. ✎ Sound Mode DSP(Digital Signal Processor) Function This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. Press the DSP button. SMART SOUND MP3 ENHANCER POWER BASS DSP MODE OFF • SMART SOUND : This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. • MP3 ENHANCER : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit). • POWER BASS : This function stresses low tones providing thudding sound effects. SFE(Sound Field Effect) MODE You can set the SFE mode best suited for the type of music you are listening to. Press the SFE MODE button. HALL1 Provides a clear vocal as if listening in a concert hall. HALL2 Provides also a clear vocal as if listening in a concert hall but, less powerful than HALL1. JAZZ Recommended setting for Jazz. CHURCH Gives the feel of being in a grand church. ROCK Recommended setting for Rock. SFE OFF Select this for normal listening. DSP SFE MODE HT-C 5500_E LS _E N G _0217.in dd 5 1HT-C5500_ELS_ENG_0217.indd 512010-0 2-1 8 9 :2 3:4 92010-02-18 9:23:49
52 English Basic Functions Using the TOOLS button During the slide show playback, you can use various function by pressing the TOOLS button. Stop Slide Show Slide Show Speed : Normal Background Music Zoom Rotate InformationTools > Move " Enter ' Return Stop Slide Show : Select this if you want to stop the slide show. Slide Show Speed : Select this if you want to adjust the Slide Show speed. Background Music : Select this if you want to listen to music while viewing a picture. Zoom : Select this if you want to enlarge the current picture. (Enlarged up to 4 times) Rotate : Select this if you to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information : Shows the picture information including the name and size, etc. NOTE To enable the Background Music function, both music and MP3 fi les must be contained in the same folder. However, the sound quality can be affected by the bit rate of the MP3 fi le, the size of the photo and the encoding method. • • • • • • ✎ Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Press the PL II button. MUSIC When listening to music, you can experience sound effects as if you are listening to the actual performance. MOVIEAdds realism to the movie soundtrack. PROLOG You will experience a realistic multi-channel effect, as if using six speakers, while using just the front left and right speakers. MATRIXYou will hear multi channel surround sound. STEREOSelect this to listen to sound from the front left and right speakers and the subwoofer only. NOTE When selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound. This mode is available only with 2 channel audio. Playing back a Picture G Playing a JPEG Disc Insert a JPEG disc into the disc tray. Press the ◄► buttons to select the Photos, and then press the ENTER button. Press the ▲▼◄► buttons to select the folder you want to play, and then press the ENTER button. Press the ▲▼◄► buttons to select the photo you want to play, and then press the ENTER button. NOTE You can't enlarge the subtitle and PG graphic in the full screen mode. ✎ 1. 2. 3. 4. ✎ TOOLS HT-C 5500_E LS _E N G _0217.in dd 5 2HT-C5500_ELS_ENG_0217.indd 522010-0 2-1 8 6 :2 8:2 22010-02-18 6:28:22
English 53
04 Basic Functions
Playing back a USB Storage
F
You can use the USB connection to play multimedia
fi les (MP3, JPEG, DivX, etc) downloaded from the
USB storage device.
Move to the home menu.
In Stop mode, connect the USB storage device
to the USB port on the front panel of the product.
The message “Do you want to access the
device?” will be displayed.
Press the ◄► button to select Yes, then
press the ENTER button.
Press the RED(A) button.
internet radioYou Tube
USB a Change Device Safely Remove USB d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
CD
USB
Press the ▲▼ buttons to select the USB,
then press the ENTER button.
Press the ◄► buttons to select the desired Videos,
Music or Photos, then press the ENTER button.
4-1. Press the BLUE(D) button.
USB d Home " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
USB
5-1. Press the ◄► buttons to select the USB,
then press the ENTER button.
6-1. Press the ▲▼ buttons to select the desired
Videos, Music or Photos, then press the
ENTER button.
7. For playing back Video, Music or Photos
fi les, see pages 44~52.
1.
2.
3.
4.
5.
6.
NOTE
You must remove the USB storage device
safely (by performing the “Safe to Remove
Hardware” function) in order to prevent a
possible damage to the USB memory. Press
the MENU button to move to the main screen,
and select the YELLOW(C) button and press the
ENTER button.
When the Audio-CD (CD-DA), MP3 and JPEG
fi les are in stop mode, you can't see full screen
by pressing the FULL SCREEN button on the
remote control.
If you insert the disc when playing USB storage
device, the device mode is changed to “DVD
or CD” automatically.
To listen to your music fi les with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 52)
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Automatic Tuning 1 : When the # $ button
is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the
TUNING/CH (
) button to automatically
search for active broadcasting stations.
Manual Tuning : Press the TUNING/CH
(
) button to increase or decrease the
frequency incrementally.
Using buttons on the product
Press the FUNCTION ( ) button to select FM.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( )
button to select PRESET and then press the
# $ button to select the preset station.
Automatic Tuning 2 : Press the STOP ( )
button to select MANUAL and then press and
hold the
# $ button to automatically
search the band.
Manual Tuning : Press the
STOP ( ) button to
select MANUAL
and then press the # $
button to tune in to a lower or higher frequency.
✎
1.
2.
•
•
•
1.
2. •
•
•
HT-C 5500_E LS _E N G _0217.in dd 5 3HT-C5500_ELS_ENG_0217.indd 532010-0 2-1 8 9 :2 3:5 52010-02-18 9:23:55
54 English Basic Functions Setting Mono/Stereo Press the MO/ST button. Each time the button is pressed, the sound switches between STEREO and MONO . In a poor reception area, select MONO for a clear, interference-free broadcast. Presetting Stations Example : Presetting FM 89.10 into memory Press the FUNCTION button to select FM. Press the TUNING/CH () button to select . Press the TUNER MEMORY button. NUMBER fl ashes on the display. Press the # $ button to select preset number. You can select between 1 and 15 presets. Press the TUNER MEMORY button again. Press the TUNER MEMORY button before NUMBER disappears from the display. NUMBER disappears from the display and the station is stored in memory. To preset another station, repeat steps 2 to 5. To tune in to a preset station, press the # $ button on the remote control to select a channel. About RDS broadcasting Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display. Description on RDS function PTY (Program Type) : Displays the type of programme currently being broadcast. • • 1. 2. 3. • 4. • 5. • • 6. • • DMO/ST C TUNER MEMORY PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. CT (Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. TA (Traffi c Announcement) : TA ON/OFF it shows that the traffi c announcement is in progress. NOTE RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. To show the RDS signals You can see the RDS signals the station sends on the display. Press the RDS DISPLAY button while listening to an FM station. Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency PS (Program Service) While searching, appears and then the station names will be displayed. appears if no signal is sent. RT (RadioText) While searching, appears and then text messages the station sends will be displayed. appears if no signal is sent. FrequencyStation frequency (non-RDS service) About characters shown in the display When the display shows PS,or RT signals,the following characters are used. The display window cannot differentiate upper case and lower case letters and always uses upper case letters. The display window cannot show accented letters, for instance, may stands for accented like • • • • ✎ • • • 1 RDS DISPLAY H T-C 5500_E LS _E N G _0217.in dd 5 4HT-C5500_ELS_ENG_0217.indd 542010-0 2-1 8 9 :2 3:5 82010-02-18 9:23:58
English 55 04 Basic Functions Using an iPod You can enjoy music, video fi les from an iPod through the product. HDMI ODIDITAL AUDIO IN WIRELESS FM ANTiPodHDMI ANCE : 3 OPTICAL DIDITALAUDIO INWIRELESSFM ANTHDMI ANCE : 3 iPod Listening to Music You can play music fi les stored in the iPod player by connecting it to the product. internet radioYou Tubeinternet radioYo u Tu b e iPodNo disciPodMEMU No Disc a Change Deviced View Devices s Enter Please activate Internet@TV service to enjoy a variety of Internet Services. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. Place the iPod in the supplied iPod Dock. Your iPod is automatically turned on. “iPod” message appears on the TV screen. Press the RED(A) button. Press the ▲▼ buttons to select iPod, then press the ENTER button. Press the ◄► buttons to select Music, then press the ENTER button. Select the music fi le to play. - You can use the remote control or product to control simple playback functions such as the PLAY, PAUSE , STOP , # / $ , / and REPEAT buttons. See page 15. 1. 2. • • 3. 4. 5. 6. PTY (Program Type) indication and PTY-SEARCH function One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. To search for a program using the PTY codes Before you start! The PTY Search is only applicable to preset stations. To stop searching any time during the process, press PTY SEARCH button while searching. There is a time limit in doing the following steps. If the setting is cancelled before you fi nish, start from step 1 again. When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control. :ˆ:‰:Š :‰ RDS DISPLAY TA PTY- PTY SEARCH PTY+ Press the PTY SEARCH button while listening to an FM station. Press the PTY- or PTY+ button until the PTY code you want appears on the display. The display gives you the PTY codes described to the right. Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display. The centre unit searches 15 preset FM stations, stops when it fi nds the one you have selected, and tunes in that station. • • • • 1. 2. • 3. • HT-C 5500_E LS _E N G _0217.in dd 5 5HT-C5500_ELS_ENG_0217.indd 552010-0 2-1 8 9 :2 4:0 02010-02-18 9:24:00
56 English Basic Functions NOTE Adjust the volume to a moderate level before you connect your iPod and product. When the product is powered on and you connect an iPod, the product will charge your iPod's battery. Make sure to connect the dock connector so that the label “SAMSUNG” faces upward. “Made for iPod” means that an electronic accessory has been designed to connect specifi cally to the iPod and has been certifi ed by the developer to meet Apple performance standards. “Works with iPhone” means that an electronic accessory has been designed to connect specifi cally to an iPhone and has been certifi ed by the developer to meet Apple performance standards. iPod Music categories File information including the artist name, album name, music title and genre will be displayed according to the ID3 Tag information on the appropriate music fi le. Now PlayingPlays a recently played fi le or moves to the playback screen of the current fi le. ArtistTo play by artist. SongsTo play in numeric or alphabetical order PlaylistTo play by Playlist. AlbumTo play by album. GenericTo play by genre. ComposersTo play by composer. NOTE The category list may differ, depending on the iPod model. What is an ID3 Tag? This is what is attached to an MP3 to carry information relevant to the fi le such as the title, artist, album, year, genre and a comment fi eld. ✎ ✎ Watching a Movie You can play video fi les stored in the iPod player by connecting it to the product. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. In the iPod screen, move to Settings > Videos , then set the TV Out option and the TV signal. Place the iPod in the supplied iPod Dock. “iPod” message appears on the TV screen. Press the RED(A) button. Press the ▲▼ buttons to select iPod, then press the ENTER button. Press the ◄► buttons to select Videos, then press the ENTER button. Select the video fi le to play. - You can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE , STOP , # / $ and / buttons. (See page 15.) iPod models that can be used with this product iPod nano 3rd generation (video) iPod 5th generation (video) iPod nano 4th generation (video) iPod touch 1st generation iPod touch 2nd generation iPhone 3G iPod classic iPhone NOTE You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page 24). If you want to iPod video via VIDEO output, set Anynet+(HDMI-CEC) to off. No other screen than the playback one will appear on the TV screen. Check other screens on the iPod player. If the connected iPod does not support video playback, the “Cannot play video fi les saved on this iPod” message appears when you select the Video menu. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 1. 2. 3. • 4. 5. 6. 7. ✎ H T-C 5500_E LS _E N G _0217.in dd 5 6HT-C5500_ELS_ENG_0217.indd 562010-0 2-1 8 9 :2 4:0 42010-02-18 9:24:04
English 57 05 Network Services You can enjoy various network services such as Internet@TV or BD-LIVE by connecting the product to the network system. Check the following instructions before using any network service.Connect the product to the network. (see pages 26~27) Confi gure the network settings. (see pages 39~41) 1. 2. Using Internet@TV Connect this product to the network to download various for a fee or free-of-charge applications. Internet@TV brings useful and entertaining content and services directly from the web to your product such as news, weather forecasts, stock market quotes, games, movies and music. You can also initiate this function by pressing the INTERNET@ button on the remote control. Getting Started with Internet@TV Move to the home menu. internet radioYou Tube No Disc a Change Device d View Devices " Enter Please activate Internet@TV service to enjoy a variety of Internet Services. Press the ◄► buttons to select Internet@ TV and press the ENTER button. In the start screen of the Internet@TV service, you will see the service agreement screen. You must agree to the service terms and conditions before you can use the Internet@ TV service. 1. 2. 3. After you have signed off on the service agreement, the Internet@TV service starts updating. It takes several minutes. When the update is complete, you will see the Internet@TV menu screen. Internet@TV at a Glance Contents 1Contents 2Contents 3Contents 4 Contents 1Contents 2Contents 3My Applications Recommended by Date 1/3 a Login b Mark as Favorite d Sort by ' Return 1 5 64 23 Settings Samsung AppS 1Commercial : Displays Internet@TV Guide, product introduction and new application introduction. 2Recommenced : Displays recommended contents managed by Samsung. 3My Application : Displays your personal gallery which can be added and deleted by you. 4 Navigation Help : Displays remote control buttons available. RED(A) : To log in to to Internet@TV. GREEN(B) : To mark the application as a favorite. BLUE(D) : To sort the applications. Return : To return to the previous menu.• • • • 5 Settings : You can set the system setup and create accounts, etc. 6Samsung AppS : You can download various chargeable or free-of-charge application services. 4. INTERNET @ Network Services H T-C 5500_E LS _E N G _0217.in dd 5 7HT-C5500_ELS_ENG_0217.indd 572010-0 2-1 9 4 :0 4:3 12010-02-19 4:04:31
58 English Network Services Using the Keypad Through your remote, you can use the On-Screen Keypad in several Internet@TV applications to enter text. Pressing the FULL SCREEN button on the remote while you are using the Screen Keypad lets you to change the text fi elds to lower case, upper case, numbers and icons. aA1 abcdef123 ghijklmno456 pqrstuvwxyz789 Input ModeDelete0] For example, here is how to search an address in Google Maps: Press the ENTER button on the remote at the Google Maps icon at the Internet@TV. Press the GREEN(B) button to use the SEARCH function. Press the ◄► buttons to move to the "Search or address" window. Press the ENTER button to use Search or address function. For example, suppose that you want to input “105 Challenger Rd., Ridgefi eld Park NJ’. Press the FULL SCREEN button on the remote twice to change the input mode from lower case to numbers. Press ‘1’, ‘0’, ‘5’. Press the YELLOW(C) button on the remote to input a blank space. Press the FULL SCREEN button on the remote 3 times to change the input mode from numbers to upper case. Press ‘ 2’ button on the remote 3 times to input C. Press the FULL SCREEN button on the remote 3 times to change the input mode from upper case to lower case. Press buttons on the remote to input the rest of ‘Challenger Rd., Ridgefi eld Park NJ’. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Press the ENTER button. The map and address appear on the screen. NOTE Samsung Electronics shall take no legal responsibility for any interruption of the Internet@TV service caused by the service provider for any reasons. The Internet@TV service is to download and process data via the Internet so that you can enjoy the contents on the TV screen. If the Internet connection is unstable, the service may be delayed or interrupted. Furthermore, the product may be turned off automatically. If this is the case, check the Internet connection and try again. The application service may be provided in English only and the contents available may vary, depending on the area. For more information about the Internet@TV service, visit the web site of the applicable service provider. The services provided are subject to change, depending on the Internet@TV service provider. The Internet@TV service contents may differ according to the fi rmware version. For-a-fee DivX contents with copy protection can only be played using HDMI cable. If you have connected your player to your TV using Component or video cables, the DivX video signal can not output or the popup message “Connect with a HDMI cable to play this fi le.”or “Cannot play current fi le” will be displayed. 13. 14. ✎ H T-C 5500_E LS _E N G _0217.in dd 5 8HT-C5500_ELS_ENG_0217.indd 582010-0 2-1 8 9 :2 4:0 82010-02-18 9:24:08
English 59
05 Network Services
Account Login
For a more enjoyable application experience,
register and log in to your account.
To do this, you must create an account fi rst. (For
instructions on creating an account, refer to
Internet@TV ID on this page)Press the ▲▼◄► buttons to select the
desired application and press the RED(A)
button.
Login
a Create [0~9] Enter PIN ' Cancel
adgimUser Account :
Password :
Enter the user account and password.
Settings
Create IDs and confi gure Internet@TV settings
from this screen.
System setup Internet@TV ID
Service Manager
Properties
Settings
Change the Service Lock passwordReset
' Cancel
1.
2.
System Setup
Reset
Resets Internet@TV settings to factory default
settings.
NOTE
If you forgot your password, press the STOP
( ) button on the front panel of the product for
more than 5 seconds with no disc inserted.
Internet@TV ID
Use this menu to create or delete an account and
enter or delete account information.
You can control your account including contents
site’s account information.
This account is only for Internet@TV.
Create
Create an account and link it with desired service
applications.
NOTE
The account name must be at least 1
character in length but no more than 8.
You can register up to 10 User Account
Names.
Manager
Service Site : Register login information for
service sites.
Change Password : Change account
password.
Delete : Delete the account.
✎
✎
•
•
•
HT-C 5500_E LS _E N G _0217.in dd 5 9HT-C5500_ELS_ENG_0217.indd 592010-0 2-1 8 9 :2 4:0 82010-02-18 9:24:08
60 English
Network Services
Service Manager
Delete and lock applications installed to Internet@
TV.
Lock
Lock the application. Accessing a locked
application requires the password.
Delete
Delete the application.
Properties
Display information about Internet@TV. Use the
Check the speed of your internet connection
option to test your network connection.
Samsung AppS
Various applications are available from here,
organized into different categories. Some
applications have a download fee.
YouTubeTV store Test User002
Samsung AppS
a Login b Thumbnail View d Sort By ' Return
What's New! Video Sports Lifestyle Games Infomation Other
My Applications Help
Video1/1
Free
FeaturedMost downloadedMost recent Name
My Application
Displays the application list.
Help
If you questions about Internet@TV, check this
section fi rst. If none of the tips apply, please visit
the help website.
Using the colour buttons with the Samsung
Apps
RED(A) (Login) : To log in to the internet
service.
GREEN(B) (Thumbnail View) : To change the
view mode.
BLUE(D) (Sort By) : To sort the applications
by Featured, Most Downloaded, Most Recent
or Name.
Internet@TV Services Available
- YouTube : You can view video streamed by
YouTube.
NOTE
The available Internet contents services may
be added or deleted.
•
•
•
✎
HT-C 5500_E LS _E N G _0217.in dd 6 0HT-C5500_ELS_ENG_0217.indd 602010-0 2-1 8 9 :2 4:0 82010-02-18 9:24:08