Samsung Ht Ds1000 Instruction Manual

							60
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table. • 
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than
the distance of Df in the figure, set the mode as
0ms. Otherwise, change the setting according to
the table.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
Ideal CENTER
SPEAKER placement
It is desirable to place all speakers within this circle.Ideal
SURROUND
SPEAKER
placement
SETUP
•You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
435
Press Cursor      button
to move to ‘DELAY
TIME’ and then press
ENTERbutton.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
Press Cursor     ,
to set the Delay
time
Distance between Df and Dc  Delay Time
0 ms
1 ms 
2 ms
3 ms
4 ms
5 ms 0 inch
13.6 inches
27.2 inches             
40.8 inches  
4.5 feet              
5.6 feet
Distance between Df and Ds Delay Time
0 ms
3 ms 
6 ms
9 ms
12 ms
15 ms 0 inch 
40.8 inches
6.7 feet             
10.0 feet             
13.4 feet             
16.7 feet             
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 57
 
						

							61
Setting the Audio Quality
You can adjust the balance and level for each speaker.
21
43
In Stop mode,
press MENU
button.Press Cursor     
button to move to
‘Audio’ and then press
ENTERbutton.
Press Cursor      button
to move to ‘SOUND
EDIT’ and then press
ENTERbutton.
Method 1When adjusting the audio quality using the setup screen
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
Press Cursor       ,
buttons to select and
adjust the desired item.
Press the      ,      buttons
to adjust the settings.
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 58
 
						

							•The adjustments will appear on the main unit, not on your TV screen.
Adjusting Front/Rear Speaker Balance
•You can select between 00 and –06 and OFF.
•The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
•You can adjust volume level from -6dB to +6dB.
•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Method 2When manually adjusting with the SOUND EDIT button
21
Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance
Press SOUND
EDITbutton and
then press Cursor    
,     .
3
Adjusting Center Speaker Level
4
Adjusting Rear Speaker Level
62
Press SOUND
EDITbutton and
then press Cursor    
,    .Press SOUND
EDITbutton and
then press Cursor   
,    .
Press SOUND
EDITbutton and
then press Cursor   
,    .
Note
SETUP
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 59
 
						

							63
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
12
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
• Pressing the Cursor      button
increases the compression, and
pressing the Cursor      reduces it.
34
Press Cursor
button to move to
‘DRC’ and then press
ENTERbutton.
Press Cursor     ,
to adjust the ‘DRC’.
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 60
 
						

							64
AV SYNC Setup
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
SETUP
•Audio menu appears.
21
•Setup menu appears.
•AV-SYNC screen appears.
3
Press Cursor     ,     buttons
to move to ‘Audio’ and then 
press ENTERbutton.
Press Cursor     ,      buttons
to move to ‘AV-SYNC’ and
then press ENTERbutton. Press the MENUbutton.
4
•You can set the audio delay time between 0 ms and
300 ms. Set it for the best sync up with audio.
Press Cursor      ,     buttons
to select the Delay Time of
AV-SYNC and then press the
ENTERbutton.
Video may lag behind the audio if the unit is connected to a digital TV. 
If this occurs, adjust the audio delay time to sync up with the video.
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 61
 
						

							65
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press       PL II MODEbutton.
• MUSIC: When listening to music, you can experience sound effects as if you are
listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five
speakers, while using just the front left and right speakers.
• MATRIX: You will hear 5.1 channel surround sound.
• STEREO: Select this to listen to sounds from the front left and right speakers and the
subwoofer only.
•Each time the button is pressed, the mode changes as follows.
•When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.Note
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 62
 
						

							66
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
12
•You can select between 0 and 7.•You can select between 0 and 6.
34
•PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting wraparound effect with side wall imaging.
•CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound. 
•DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
•When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and                 (Dolby Pro Logic II) button does not work.
•You can select either 0 or 1.
Press        PL II MODE
button to select ‘MUSIC’
mode.Press PL II EFFECT button
and then press Cursor      ,
buttons to select the mode.
Press PL II EFFECT button
and then press Cursor      ,
buttons to select the next mode.
Press PL II EFFECT button
and then press Cursor      ,
buttons to select the mode.
Note
SETUP
CMXMPEG-2 AACMPEG
DSP
CMXMPEG-2 AACMPEGTATUNED
CMXPEG-2 AAC
CMXMPEG-2 AACMPEG
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 63
 
						

							67
Auto Sound Calibration Setup
Auto Sound Calibration
By setting the auto sound calibration function just once when you relocate or install the unit, you can have
the unit automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create 5.1-channel sound field optimized for the listeners environment.
L: Front Speaker (L) R: Front Speaker (R)
C: Center Speaker  SW: Subwoofer
LS: Rear Speaker (L) RS: Rear Speaker (R)
•Each time the button is pressed, the selection alternates
between S.LOGO ONand S.LOGO OFF.
•If you select S.LOGO ON, a sound logo will be output
when the disc reading is finished after power-on. If you
select S.LOGO OFF, no sound logo will be output.
To Turn the Sound Logo On/Off
Press and holdASCbutton.
Briefly pressASCbutton.1
2•ASC CHECK appears in the display.
•Distance and level values specified for
each channel will appear in the display.
Press and hold ASCbutton twice.
Briefly press ASCbutton.1
2
When you turn on the power, the unit produces a sound logo after
the disc is read to notify that the unit is optimized for playback.
To Verify the Auto Sound Calibration
* This function is available only for DVD/CD playback.
•If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without
connecting the auto sound calibration microphone will display the message PLEASE SET ASC FUNCTION FIRST
in the display.
•Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume
using the volume control buttons.
•If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled.
Note
Auto Sound Calibration
Microphone
*The following images are for illustrative purposes only and may differ from the actual product.
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 64
 
						

							68
To listen in the auto sound calibration mode, briefly press ASC button.
•The selection alternates between ASC ONand ASC OFFin the display.
•If you select ASC ON, you will hear sound in the auto sound calibration mode.  
If you select ASC OFF, you will hear sound  in the mode set in the audio setting of the setup screen.
1
Plug the auto sound calibration
microphone into the auto sound
calibration input jack.
2
Place the auto sound calibration
microphone at the listeners position.
4
5
Press ASC button.
When the message REMOVE MIC
appears in the display, unplug the auto
sound calibration microphone.
A bell sounds and the
setup finishes.
•The tone will be output twice, in the given order (L ➝ C ➝ R ➝ RS  ➝
LS ➝ SW), and 5.1-channel sound field is optimized automatically.
•The auto sound calibration setup takes about 2 minutes to complete.
3
Adjust the volume control on the main
unit as follows:
•If the distance between the listener and the speaker is over 16.5 feet:
Set the main units volume to over 25.
•If the distance between the listener and the speaker is 10 to 16.5 feet: 
Set   the main units volume to 25.
•If the distance between the listener and the speaker is below 10 feet: 
Set the main units volume to 15.
To cancel the auto sound calibration setup, press ASC button.
•The tone output stops, CANCEL ASC appears in the display followed by REMOVE MIC, and the setup is cancelled.
A tone is output.A result for each speaker is displayed.
SETUP
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 65
 
						

							69
Live Surround Mode
You can reproduce a 2-channel sound source, such
as CD, and radio broadcast, in 5.1-channel
surround sound.
SUPER 5.1
•Each time the button is pressed, the
selection alternates between SUPER
5.1and SUPER OFF.
•Select SUPER 5.1 to play 2-channel
sound in 5.1 channels.
Press SUPER5.1
button.
If you press the MUSICbutton when listening to a
2-channel sound source, it will be reproduced in
5.1-channel surround sound so that you can enjoy a
dynamic sound with a sense of presence.
MUSIC
•Each time the button is pressed,
the selection changes as follows:
LIVE ➝JAZZ ➝ROCK ➝
CLASSIC➝DISCO➝LSM OFF.
Press MUSICbutton.
You can select from 3 different modes of sound
field for movies.
MOVIE
•Each time the button is pressed, the
selection changes as follows:
CINEMA ➝STADIUM ➝LSM OFF.
Press MOVIE
button.
•When you insert a DVD recorded in 2-channel or multi-channel format and press the
SUPER 5.1 button, the message THIS FUNCTION APPLIES ONLY 2CH SOURCE
appears in the display and it will not work.Note
 45P~82P(DS1000)-sea  9/15/04 2:44 PM  Page 66