Samsung Prostar Dcs Compact System Administration Special Features Guide

SYSTEM
ADMINISTRATION
AND
SPECIAL FEATURES
GUIDE
SYSTEM
ADMINISTRATION
AND
SPECIAL FEATURES GUIDE
PROSTAR DCS COMPACT
DIGITAL COMMUNICATIONS SYSTEM
System Software Release 1, 2
November 1997       

TABLE OF CONTENTS
ABOUT THIS  BOOK
..........................................................  1
SPECIAL FEATURESAutomatic Night Service ....................................................................  2
Manual Night Service ........................................................................  2
Calling The System Operator ............................................................  2
Operator Recalls ...............................................................................  3
Executive...

1
ABOUT THIS  BOOK
This book contains instructions for special features that every telephone user
may not need to know. The owner can decide who the system administrator will
be and who will have access to these features. Station users can be trained on
only the items that apply to them. This procedure will help control costs and
telephone abuse.
Several of the features listed in this book are specific to the system operator or
attendant position. You can have more than one operator or set your system...

SPECIAL FEATURES
NIGHT SERVICE OPERATION(AUTOMATIC OR MANUAL)Your system is designed to have an alternate mode of operation generally des-
ignated as Night Service. Night Service permits incoming calls to ring differently
than during normal day operation. Night Service is available on an individual
tenant basis and may be set manually or automatically. While in the Night mode,
each station will be limited to its individual night class of service dialing restric-
tions. You can put the system in or out of...

4IN/OUT OF GROUPAny station assigned to a station group can remove itself from that group and
then reenter the group at a later time. When out of the group, a station can
receive calls to its extension number but not to the group. There are 30 groups
and the access codes are 500–529.
To create a backup or relief operator position, assign the main operator and one
or more backup individuals to the operator group. All but the main operator
should be out of the group. When it is necessary to use a backup...

AUTHORIZATION CODESAuthorization codes are used to validate a station user and give permission to
make a call. These four digit authorization codes can be either forced or op-
tional, but if used, are always verified from a system list of 100 entries. Each
authorization code has an associated class of service. When the code is en-
tered, the class of service is changed to that of the authorization code.USING AUTHORIZATION CODESAfter going off-hook, the station user must dial ✱ followed by a four digit...

CALLER ID SPECIAL FEATURESNOTE: The Caller ID features below require optional software and/or hardware.
Please ask your installation and service company for details.ABANDON CALL LIST (50)The system has a system-wide abandoned call list that stores CID information
for the last 50 calls that rang but were not answered and were accompanied with
valid CID information. Calls with CID information consisting of OUT OF AREA,
PAYPHONE or PRIVATE will not be stored in the list. The abandoned calls list is
accessed...

SYSTEM ADMINISTRATOR
PROGRAMMING
CUSTOMER LEVEL ACCESSBefore any customer programs can be accessed, you must first open system
programming using the passcode you have been assigned. This must be done
using an LCD 24B keyset. Should it become necessary to change this passcode,
see your service company.z
While your handset is on-hook, press TRSF and then dial 200.
The display shows [ENABLE CUS. PROG. PASSCODE].
z
Dial the four digit passcode.
The display shows [ENABLE CUS. PROG. - DISABLE].
z
Dial 1 to...

10RESET STATION PASSCODES TO
DEFAULTIndividual keyset users can set or change their own individual passcodes. These
passcodes are used to lock and unlock keysets, override toll restriction and
access the DISA feature. At times, it may be necessary for the system admin-
istrator to reset a station’s passcode to default “1234.” This program cannot be
used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.
Open customer...

12 NOTE: When the character you want appears on the same dial pad key as does
the previous character, press the UP key to move the cursor to the right.
COUNT 1 2 3 4 5
DIAL 0 Q Z . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V
✱ ✱✱ ✱
✱8
DIAL 9 W X Y ( 9
DIAL 
✱ ✱✱ ✱
✱ := [ ]
✱ ✱✱ ✱
✱
The # key can be used for the following special characters: #, space, &, !, :, ?,
., %, $, -, /, =, [, ], @, ^, (, ), _, +, {, },...