Samsung Samtron 73v Quick Start Guide

							 
Select Model Name    
 
 
 
Please make sure the following items are included with your monitor. 
If an
y items are missing, contact your dealer. 
 
 
 
 
 Unpacking 
 
 
 Monitor 
 
 
Monitor
 
 
 
 
 Manual 
 
 
Quick Setup Guide Warranty CardUsers Guide, Monitor Dirver 
CD 
 
 
  
 
 Cable
  
SAMTRON 93V
 
						

							D-Sub Cable  Power Cord 
 
 
 
 Front 
 
 
 1. Menu button [ ] 
Use this button for open the on-screen menu and exits from the menu 
screen or closes screen adjustment menu. 
2. MagicBright™ 
button [ ] 
MagicBright™ is a new feature providing optimum viewing environment 
depending on the contents of the image you are watching. 
Currently four different modes are available: Custom, Text, Internet, and 
Entertain. 
Each mode has its own pre-configured brightness value. You can easily 
select one of four settings by simply pressing MagicBright control buttons.
1) Text : Normal Brightness 
  For documentations or works involving heavy text.
2) Internet : Medium Brightness 
  For working with a mixture of images such as text and graphics.
3) Entertain : High Brightness 
  For watching motion pictures such as a DVD or VCD.
4) Custom 
  Although the values are carefully chosen by our engineers, the pre-
configured values may not be comfortable to your eyes depending on 
your taste.  
  If this is the case, adjust the Brightness and Contrast by using the 
OSD menu. 
>>Click here to see an animation clip 
3. Power button [ ] / 
Power indicator
Use this button for turn the monitor on and off./ 
This light glows green during normal operation, and blinks green once as 
 
						

							 
 
   the monitor saves your adjustments.
4. Brightness button [ ]
When OSD is not on the screen, Push the button to adjust brightness.
2,4. Adjust buttons [ ]
Adjust items in the menu.
5. Enter button [ ]/  
Auto button 
Activate a highlighted menu item. /  
Use this button for auto adjustment direct access.
See PowerSaver described in the manual for further information regarding power saving functions. 
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods.
 
 
 
 
  
  
  
    
 
Rear  
(The configuration at the back of the monitor may vary from product to product.)  
  
 1. Power portConnect the power cord for your monitor to the power port on the back of the 
monitor.
2. D-sub 15-pin portConnect the signal cable to the 15-pin, D-sub connector on the back of your 
monitor. 
See Connecting Your Monitor for further information regarding cable connections.
 
						

							 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.
3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
 
 
 
 
 
						

							   Monitor Assembly 
 1. Monitor and Bottom  
2. Monitor and Hanger   
 
   Attaching a base 
 
   This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
        A. 
Monitor 
        B. 
Mounting interface pad  
 
1 . Turn off your monitor and unplug its power cord.
2 . Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 
3 . Remove the four screws and then remove the Stand from the LCD monitor.
4 .
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the 
four screws that came with the arm-type base, wall mount hanger or other base.
 
 
 
						

							When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions as appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :  http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
 
 
  Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click 
Windows XP/2000 Driver  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation dont damage 
your system.The certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/. 
 
 
Windows XP | Windows 2000 | Windows NT | Linux  
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions as appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :  http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor (Korea)
 
						

							http://www.samsungmonitor.com.cn/ (China)
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
 
						

							     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the model list 
and click the 
Next button.  
 
     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then click 

OK button. 
 
  
 
This monitor driver is under certifying MS logo,and this installation dont damage your system.The 
certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
						

							 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a specific 
driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9. Choose your monitor model and click the 
Next button then click 
Next button.  
10. Click the 
Finish button then the 
Close button.  
If you can see the 
Digital Signature Not Found window then click the 
Yesbutton. And click 
the 
Finish button then the 
Close button.  Case1: If the Properties button is inactive, it means your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps 
continually.
 
 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then 
click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at 
All Display Modes, select the level of resolution and vertical frequency 
by referring to the Preset Display Modes in the user guide.
 
 
						

							 
 
    Linux Operating System 
 
        To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect the actual execution of X-
Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.