Samsung Samtron 73v Quick Start Guide

							 
Select Model Name   
 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1.Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.
3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.
 
 
 
 
SAMTRON 93V
 
						

							   Attaching a base 
 
   This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.
       
A. Monitor 
       
B. Mounting interface pad  
 
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 
3. Remove the four screws and then remove the Stand from the LCD monitor.
4.
Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the 
four screws that came with the arm-type base, wall mount hanger or other base.
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions as appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :  http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
 
 
  Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click 
Windows XP/2000 Driver  
3. Choose your monitor model in the model list, then click the 
OK button. 
 
 
 
4. If you can see following 
Messa
ge window, then click the 
Continue Anyway button. Then 
 
						

							click 
OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
This monitor driver is under certifying MS logo,and this installation dont damage 
your system.The certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/. 
 
 
Windows XP | Windows 2000 | Windows NT | Linux  
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM included 
with this monitor. Driver installation is slightly different from one operating system to 
another. Follow the directions as appropriate for the operating system you have. 
 
Prepare a blank disk and download the driver program file at the Internet web site shown here. 
 
zInternet web site :  http://www.samsung-monitor.com/ (Worldwide)
http://www.samsungusa.com/monitor (USA)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)
 
  Microsoft® Windows® XP Operating System 
 
1. Insert CD into the CD-ROM driver.  
2. Click 
Start —> 
Control Panel then click the 
Appearance and Themes Icon.  
 
     
 
3. Click 
Display icon and choose the 
Settings tab then click 
Advanced... 
 
 
						

							     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the model list 
and click the 
Next button.  
 
 
						

							     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then click 

OK button. 
 
  
 
This monitor driver is under certifying MS logo,and this installation dont damage your system.The 
certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
 
						

							1. Choose 
OK button on the 
Insert disk window.  
2. Click the 
Browse button on the 
File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click 
OK button.  
How to install
1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a specific 
driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9. Choose your monitor model and click the 
Next button then click 
Next button.  
10. Click the 
Finish button then the 
Close button.  
If you can see the 
Digital Signature Not Found window then click the 
Yesbutton. And click 
the 
Finish button then the 
Close button.  Case1: If the Properties button is inactive, it means your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps 
continually.
 
 
 
   Microsoft® Windows® NT Operating System 
 
1. Click 
Start, 
Settings, 
Control Panel, and then double-click 
Display icon.  
2. In Display Registration Information window, click Settings Tab and then click 
All Display Modes.  
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then 
click 
OK.  
4. Click 
Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different mode (lower mode of resolution, colors or frequency).  
If there is no Mode at 
All Display Modes, select the level of resolution and vertical frequency 
by referring to the Preset Display Modes in the user guide.
 
 
 
   Linux Operating System 
 
        To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
 
1. Press Enter at the first and the second screen after executing the X86Config file.  
2. The third screen is for 
setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for 
selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for 
setting your monitor.  
7. First of all, set a 
horizontal frequency for your monitor. (You can enter the frequency directly.)  
8. Set a 
vertical frequency for your monitor. (You can enter the frequency directly.)  
9. Enter the 
model name of your monitor. This information will not affect the actual execution of X-
Window.  
10. You have 
finished setting up your monitor.  
Execute X-Window after setting other requested hardware.  
 
						

							 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to adjust items in the menu.
3. These buttons allow you to adjust items in the menu.
4.  Activate a highlighted menu item.
 
 AUTO 
 
 
						

							MenuDescription
AUTOWhen the 
AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center. 
 
Auto adjustment allows the monitor to self-adjust to the incoming video signal. 
The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the AUTO PATTERN is on.
 
 
 MagicBright™ 
 
MenuDescription
MagicBright™Then push the MagicBright™ button again to circle through available 
preconfigured modes. 
 
						

							- four different mode (Custom/Text/Internet/Entertain) 
 
 
 Brightness 
MenuDescription
BrightnessAdjust Brightness. 
 
 
 
 Picture 
 
						

							MenuDescriptionPlay/Stop
BrightnessAdjust the Brightness.  
Direct Access Feature : When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescriptionPlay/Stop
Color ToneThe tone of the color can be changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust individual R,G,B color balance.
GammaSelect one of three pre-defined gammas.
 
 
 Image