Samsung Sdr3102 N Manual

							English _71
Event Setting
You can set the interval and type of the event that will be sent to the u\
ser.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the value.
•	 Event Interval : Set the event interval.
 
`If a series of events occurs, the e-mail will be sent at the specified 
interval, not on each event.
•	 Use Event Transfer : Select an event type to send if an event 
occurs.
 
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
4.  When the event setup is done, press .
Group Setting
You can set the group to whom the e-mail is sent, and specify the permission for each group. 
You can add recipients for each group in the  menu item. 
The recipient is set separately from the DVR user group.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the value.
•	 Add : Select  and use the virtual keyboard to add a 
group.
 
`Refer to “Using Virtual Keyboard”. (Page 35)
•	 Delete : Deletes the selected group.
•	 Rename : You can reset the recipient permission of an 
existing group.
•	 Recipient Permission : Set the permission of the recipient group.
4.  When the group setup is done, press .
Mailing ServiceSMTP
  OK  Cancel
Recipient
 Event Interval 
10 min Use Event TransferMotion 
Tampering
Change P/W  HDD Info Video Loss
Power On/Off  Manual Record
Event Group
Mailing ServiceGroupSMTP
 OK  Cancel
Recipient
 Group  Recipient PermissionMotion 
Tampering
Change P/W  HDD Info Video Loss
Power On/Off  Manual Record
Event 
 Add Delete Rename
 MAIN MENU  
						

							72_ main menu
Recipient Setting
You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and set the value.
•	 Add : You can select a recipient name, e-mail address or 
group.
 
You should have created a group in the  menu 
item before you can add a user to the group.
 
`For inputting the recipient name and email address, refer to 
“ Using Virtual Keyboard”. (Page 35)
4.  When the recipient setup is done, press .
Mailing ServiceSMTP
  OK  Cancel
Event  GroupRecipient
 Group  Name e-Mail Address  DeleteAdd
  Group 
All Group
Previous/Next Page
Mailing ServiceSMTP
 OK  Cancel
Event GroupRecipient
 Group  Name e-Mail Address  DeleteAdd
  Group 
ABC
Previous/Next PageAdd recipient
 OK Cancel

 Name
  Email
  Select Group 
ABC
main menu  
						

							English _73
CONTROLLING A PTZ DEVICE
The DVR enables you to adjust the settings of a PTZ camera as well as an\
 ordinary one to your preference.
PTZ Device
The PTZ device can be activated only if a channel in connection with the\
 PTZ camera is selected. 
Getting started with PTZ
The PTZ camera is available, only if a channel is selected, in the follo\
wing way :
 
`Using the remote control buttons  
Press the [PTZ] button on the remote control.
 
`Using the launcher menu  
Click < 
PTZ > to display the live launcher.
 
`Using the right-click menu in Live mode  
Right-click any area on the screen to display the context menu, and 
select .
 
`Using icons on the live screen  
Click the <
> icon on the live screen.
 
M   
`The PTZ function is available only if the PTZ camera is 
connected so that the <
> icon is displayed on the 
screen.
2013-01-01 01:10:2\
5
2013-01-01 01:10:2\
5
Scene Mode  
PTZ Control
Zoom In
Audio
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
 MAIN MENU  
						

							74_ main menu
main menu
Using the PTZ camera
You can use one camera to perform all functions of PAN, TILT and ZOOM for monitoring multiple places and 
set the preset to your preference in a desired mode.
1. Launch the  menu.
As the <
> icon on the bottom right corner turns 
yellow, you access the “PTZ Control” mode to display the 
“ PTZ Control” menu.
 
M   
`Be sure to configure PTZ working environments before 
operation, since the PTZ Working(Active) mark can be 
appeared to be activated even when PTZ is not operative.
2.  Use the PTZ wheel in the launcher menu to adjust the 
monitoring area, or use the direction buttons (
▲▼_ +) on 
the remote control to move the camera to a desired place.
•	 PTZ Wheel : Clicking a nearer point to the center will move in that direction slowly; clicking a farther point 
from the center will move fast.
 
`Keep clicking left to rotate the lens counter clockwise; keep clicking right to rotate the lens clockwise.
•	 Zoom (  ) : You can use the Zoom function of the PTZ camera.
•	 IRIS ( 
 ) : Adjusts the intensity of radiation incoming to the iris.
•	 Focus ( 
 ) : Enables you to adjust the focus manually.
•	 Swing : Moves between the preset start point and end point.
•	 Group : Moves in the path specified by combining the preset, pattern and auto pan.
•	 Trace : Moves camera’s framing in the predefined path.
•	 Preset : Sets the preset position for camera framing and moves to designated preset position when 
selecting a desired preset.
•	 Tour : Moves in the path specified by combining multiple groups.
 
`For the coaxial communications, the operation may differ depending on the protocol.
 
`For the  type, only SDR-5102 are supported.
 
M 
`Before entering the PTZ device control mode, set the values of the PTZ device in the  menu. 
(Page  46)
 
`For camera specifications that supports PTZ comtrol depending on communication method, refer to our web site.
2013-01-01 01:10:2\
5
PTZ Control  CAM01
Select Preset Save Rename
Camera Setup
Exit
Swing  SelectGroup SelectTrace SelectPreset SelectTour Delete Delete All 
						

							English _75
Preset Setting
A preset is a set of specific target points of a PTZ camera, and up to 127 p\
resets per a camera can be stored.
Using the mouse may help make setup easier.
1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.
2.  Select the  key.
 
The virtual keyboard for inputting the preset will appear.
 
`Refer to “Using Virtual Keyboard”. (Page 35)
•	 Save : You can add and save the preset.
•	 Rename : You can change the settings of the existing presets.
•	 Delete : Deletes the selected preset.
•	 Delete All : Deletes all existing presets.
 
M 
`If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset 
accordingly.
3.  Press . 
The preset will be saved as a name that you entered.
Camera Setting
A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.
Using the mouse may help make setup easier.
•	Select  in the PTZ Control menu. 
The camera-specific menu appears.
 
`You can configure the settings of only those cameras that support 
the protocols of Samsung, Pelco D/P, AD and Panasonic.
 
`If you are setting Auto Pan or Pattern in the camera menu, press 
and hold the appropriate button for a certain time so that the 
button operation can be different from that in normal PTZ setting.
2013-01-01 01:10:2\
5
Camera Setup

Exit
 MAIN MENU  
						

							76_ search & play
SEARCH
You can perform the search for recorded data by the time or by the search criteria such as an event. 
You can access the  menu directly in Live mode.1. In Live mode, right-click any area of the screen.
 
The Live menu appears.
2.  Select .
 
Or, press the [SEARCH] button on the remote control.
3.  The Search menu appears.
4.  The search can be restricted by the Auto Delete function.
 
Refer to “Setting the Recording >  Record Option”.  
(Page 55)
 
M   
`Overlapped data : It only appears if there exists overlapped 
data on a certain time, produced due to the change of DVR’s 
time setup. The latest data comes first, from .  
It does not appear in .
Time Search
You can search for recorded data of a desired time. 
As the time to display may be different depending on the time zone and the DST standard time, the time of 
data recorded in the same time can be displayed differently depending on time zone and DST settings.
Using the mouse may help make setup easier.
1.  Select  in the  menu.
2.  Select a date to search.
 
`Refer to “Using the Calendar”. (Page 34)
3.  The record data on the specific date will be listed. 
The display bar is different according to the data type.  
So check the data type for the color in the left pane.
4.  Use direction buttons (
▲▼_ +) to set the search criteria 
and press the [ENTER] button.
•	 Go to First : Moves to the earliest date.
•	 Go to Last : Moves to the most recent date. 
•	 Time : Enter a time to perform the search or use the up/down button <
>> to select one.
•	 Previous/Next Page : Moves to the previous / next page. (Use the remote control)
•	 Zoom In : The map enlarges in detail.
 
search & play
Time Search2013-01-01
 Play Return
2013/01/01  00:01:17
Standard  Schedule
Motion  Etc
V.Loss
Tampering Go to First
Go to Last
Zoom InZoom Out
  All  Data
CAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 06
CAM 07
Previous/Next Page
00:01
Overlapped Data 
List1
2013-01-01 01:10:25
Scene Mode 

Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2013-01-01 01:10:25
Time Search
Event Search
Backup Search
M otion SearchReturn
search & play  
						

							English _77
It will switch in the sequence of 24 hours - 16 hours - 8 hours  
- 4 hours.
•	 Zoom Out : The map will switch in the reverse order of the 
detailed mode above.
 
It will switch in the sequence of 4 hours - 8 hours - 16 hours 
- 24 hours.
 
M   
`Double-click a desired time to zoom it in/out.
•	 Preview : Click  and select (click, drag) a time in 
 to display a still image for the portion.
 
- If the selected channel does not contain any recorded data, it will be marked black.
5.  Select a data item and click .
 
The screen switches to the data playback mode.
Event Search
You can search for events by the channel and play them.
Using the mouse may help make setup easier.
1. Select  in the  menu.
2.  Use direction buttons (
▲▼_ +) to set the search criteria 
and press the [ENTER] button.
 
`All record events on a specific date will be found. (Normal/
Schedule recording included)
•	 Date/Time Preview : If you select a data item in the list, the 
still image of the selected data will be displayed in the left 
preview pane.
•	 Event : Displays the type of the event that occurred.
3.  Select a data item and click .
 
The screen switches to the event data playback mode.
Backup Search
Searches for backup data in the connected backup device. 
Only data in the format of DVR is included in the search. 
Refer to  in “Backup  > Setting the Backup”. (Page 58)
Using the mouse may help make setup easier.
1.  Select  in the  menu.
2.  Use direction buttons (
▲▼_ +) to set the search criteria 
and press the [ENTER] button.
•	 Record Period : Displays the record period.
•	 Channel info : Displays the recorded channel.
•	 Play Start Time : Select a time that you start playing.
3.  Select a data item and click .
 
The screen switches to the backup data playback mode.
Backup Search
 Play  Return
 
No.  Folder Name  File Name
 1  20130101 16190000
Previous/Next Page
  File Name 
 
Channel info
  Record Period 
2013-01-01 01:01:01 - 2013-01-01 01:01:10
  Play Start Time 
2013-01-01 16:30:52 USB:USB2FlashStorage
Time Search2013-01-01
 Play Return
2013/01/01  00:01:17
Standard  Schedule
Motion  Etc
V.Loss
Tampering Go to First
Go to Last
Zoom InZoom Out
  All  Data
CAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 06
CAM 07
Previous/Next Page
00:01
Overlapped Data 
List1
Event Search
CAM 01
2013-01-01  View all
 Play  Return Previous/Next Page
2013/01/01  00:01:22
 
No.  Date/Time Preview  Event
  3  02:47:54 ~ 02:48:59  Motion
  2  00:39:06 ~ 00:40:30  Motion
  1  00:01:22 ~ 00:02:28  Motion
Go to First
Go to Last
Overlapped Data 
List1
 SEARCH & PLAY  
						

							78_ search & play
search & play
Motion Search
If a motion is detected in each channel, you can set a desired area to perform the search.
You can use the mouse to select the related items.
1. Select  in the  menu.
2.  Use direction buttons (
▲▼_ +) to set the search criteria 
and press the [ENTER] button.
 
`If you set the motion area to , the  
button will be activated.
•	 Motion Region : Select an area to perform the search.
 
- All Area : Searches for all areas of the selected channel.
 
- Current Area : Searches for the motion area for each 
channel specified in “Motion Detection > 
Setting the Motion Detection Area”. (Page 56)
 
- Manual  Area : You can set the motion area manually.
•	 Setup : The Setup button will be activated only if you have 
set the motion area to Manual. Press this button to display 
the area setting window.
•	 Date/Time : The Date/Time will be automatically set by the 
hour, and the end time will be automatically set to one hour 
later than the start time if it is set.
•	 Preview : Select a data item in the list to display the still 
image of the item.
3.  Select a data item and click .
The screen switches to the motion data playback mode.
Motion Region
 OK  CancelApply to All CHCH1Individual
Motion Search
Date/Time  2013-01-01  03:41:18  2013-01-01  05:11:44
 Play  Return
  No. 
Start Time
 7  01:01:30
 6  01:01:25
 5  01:01:20
 4  01:01:15
 3  01:01:10
 2  01:01:05
 1  01:01:01
Previous/Next Page Search
Channel  CAM 01 
Motion Region  All Area Setup
2013/01/01  01:01:30 Go to First
Go to Last
Overlapped Data  List1 
						

							English _79
! SEARCH & PLAY
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help make setup easier.
1. In Live mode, click  in the right-click menu or
< 
 > in the launcher menu, or press the Play button on 
the remote control.
2.  Use the up/down button (
▲▼) to select a menu.
 
`For data search, refer to . (Page 76)
3.  Select a data item and click  in the Search menu.
The selected data is played and the play launcher appears 
on the screen.
 
`If there is an existing data,  will start immediately without 
performing the search.
•	 Playback Information : Displays the date and time of the 
current data in the top corner.
•	 Backup : Click < 
 > to set the current time to the start 
time of backup; you can specify a backup area using the 
mouse (yellow triangle).
Click < 
 > again to set the current time to the end time of 
the backup and the “Backup Range” window appears.
 
- Type : Supports formats of DVR , AVI and SEC.
Refer to a list of formats in “Setting the Backup”. 
(Page  58)
 
- Device : Select a backup device.
 
- Check Capacity : Enables you to check the capacity of 
the selected storage device.
4.  If you want to return to the Live screen in Play mode, click < 
 > in the launcher menu or press the 
[
@] button on the remote control.
2013-01-01 01:10:25Scene Mode  
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2013-01-01 01:10:2\
5
REC
 OK  Cancel
Backup Range
  Start 
2013-01-01 00:01:06 
 End 
2013-01-01 01:10:25
  Device 
USB-Storage 
 Type 
SEC
  Folder 
\20130101 
 File Name  0001
Backup :
Used  :
Free  :Change
Check capacity 
						

							80_ search & play
Using the Playback Button
Part NamesFunctions
aPlay TimelineIndicates the current playback point, and can be used to move.
bSkip Backward Moves backward by unit time. (Move by 10 minutes)
cBackward Fast 
Play Used for quick backward playback. (2 - 64x speed)
dBackward Slow 
Play  
Used for backward frame-by-frame search while in PAUSE. (1/2 - 1/8x speed)
eStep Backward
Moves backward by one frame at a time.
fPauseStops playing the current video temporarily.
gStopStops playback and moves to the live screen.
hStep Forward Moves forward by one frame at a time.
iForward Slow 
Play Ensured to play forward up to 4 channels simultaneously at a low speed. (1/2 - 1/8x speed) 
`In a split mode, the real time playback may not be supported, depending on the record 
quality, resolution and number of channels. And some frame rates may be supported.
jForward Fast Play Used for quick forward playback. (2 - 64x speed)
kSkip ForwardMoves forward by unit time. (Move by 10 minutes)
lReturnReturn to the search setup screen.
mAudioSets Audio ON/OFF.
nRECRecords all channels in Live mode.
oPartial Backup Begins backup of the selected section of the video being played, with the specified starting/
ending point.
pMode SwitchClick a desired playback mode or press [MODE] to switch the screen mode in sequence. 
`The grey area in the center of the 13-split mode plays the Live channel.  
The default channel of the Live mode is CH1, which can be changed later.
REC
search & play