Samsung Sdr3102 N Manual

							English _81
IntroducIng Web VIeWer
What is Web Viewer?
Web Viewer allows remote access to your DVRs. You have 
access to li ve video, archived video, PTZ control 
 
(if configured), etc.
Product Features
•	Remote access from a standard browser
•	 Supports PTZ camera controls
•	 Supports 1, 4, 9 , 16 camera viewing formats (maximum of 
16 cameras in the list).
•	 Gets jpeg, bmp or png format images to print and save to “Print or Save jpeg, bmp or png format images”.
•	 Record video in AVI format-compatible with popular media players. (needed the H.264 code\
c)
System requirements
The following lists the minimum suggested hardware and operating system requirements needed to run the 
Web Viewer.
OS Windows XP Professional
Windows Vista Home Basic / Premium
Windows 7
Mac OS 10.6 and later versions
Web Browser  
- Windows OS : Internet Explorer 7.0 or higher, Firefox 9 or higher, Chrome 15 or 
higher
 
- Mac OS : Safari 5 or higher
CPU Intel Pentium 4.2 GHz
Memory 512 MB
Monitor High Color 16-bit 1024 x 768
HDD 50 MB (Installation space required)
* 
  Additional HDD space required for recording.   
Recorded file size will vary depending on recording quality settings.
web viewer
 
Network
 
 WEB VIEWER  
						

							82_ web viewer
web viewer
connectIng Web VIeWer (Windows)
1. Open your web browser and type the IP address or URL of 
DVR into the URL address box.
 
M 
`“ 192.168.1.200” is set to IP by default.
 
`Set to an available IP address in "Network > Connection 
Mode”.
 
`The URL connection will be enabled only when the DDNS connection settings have been completed.
2.  A user with the admin permissions should provide the 
admin ID and password. A registered user should provide 
the user ID and password.
 
J 
`The default password can be exposed to a hacking thread so 
it is recommended to change the password after installing the 
product.
 
`Set password for your wireless network if you use the product with a wireless router. Being not protected with 
password or using the default wireless router password may expose your video data to potential threat.
 
`Please change your password every three months to safely protect personal information and to prevent the damage 
of the information theft. 
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a 
password.
 
M   
`It allows up to 10 simultaneous access including the Admin and general users.
 
`It does not allow multiple login of the Admin user.
 
`Password of the Admin and general users can be changed in  menu of the DVR.
 
`Normal users should have set  under  to “Use” before connecting to the 
Web Viewer. (Page  35)
 
`All settings are applied by the DVR’s settings.
 
`If you change such as the permission settings with logged in to the Web Viewer, you may go back to the log in 
screen.
3.  Click .
4.  When the installation confirm message appear, click [Ye s ] 
button. 
						

							English _83
5. When a program installation wizard window appears, press 
the [Install] button to install the program.
6.  When the program installation is complete, the Explorer 
window closes.
 
Open the web viewer window again to log in. 
Live Viewer's main screen appears when you log in 
successfully after installing the program.
 
 WEB VIEWER  
						

							84_ web viewer
uSIng LIVe VIeWer (Windows)
The Live Viewer screen consists of following :
MenuFunctions
aMenu Selection
Switches into corresponding menu screen by clicking each menu.
bAddress, Name, TimeDisplays the IP, model name, time, etc. of connected DVR.
cDVR Time, PC TimeSelect  or  for the OSD time information display setting of the 
Live Viewer.
dSplit Mode Selection
Selects the type of split screen and specify the channel displayed in Display Pane.
eChange ChannelSwitches into previous/next channel or perform Auto Sequence.
Click Auto Sequence button to display the Time Interval Selection menu.
f
CAPTURE
Saves current video for selected channel in designated path.
PRINT Prints current video image for selected channel through designated printer.
AVI Save Records the live video in AVI file format in designated path, and then stops recording.
Recording status icon is displayed on screen during recording.
Audio Sets the sound connected to each channel to ON/OFF.
OSD Select the format of OSD information that will be displayed.
g
PTZ Controls connect PTZ camera(s).
OSD Menu Goes to the relevant menu screen of a camera, which supports OSD menu and changes 
the menu.
a
b
c
d
e
f
g
h
i
web viewer  
						

							English _85
MenuFunctions
hDisplay Pane
Displays the video of camera connected to DVR.
iUser ID, LogoutDisplays the user's ID.  Click Logout icon for logout.
oSd Information display
a The channel number of the connected DVR are displayed.
b  Either the  or the  will be displayed as the 
current date and time, according to your configuration.
c  It displays whether the PTZ controls are active.
d  Shows Audio On/Off status.
e  Motion icon appears when a motion is detected.
f  Tampering icon appears when a tampering is detected.
g  Shows the recording status.
 
M 
`If you have set PTZ cameras for the DVR, “PTZ” is displayed on the 
screen. Select a PTZ camera channel and use the [PTZ] button for 
camera control.
connected dVr
This displays the IP address and the status of the connecting 
DVR.
 
M 
`Connection failure message
No Response : Appears when the DVR does not respond.
Access Denied  : Appears when the maximum number of 
users is exceeded.
 
`The number of simultaneous connections are limited to 10.
Setting the display of the oSd time Information
Select  or  for the OSD time 
information display setting.
•	 dVr time : Based on the time of the connected DVR
•	 Pc time : Based on the time of the PC currently running 
the Web Viewer.
ab
defcg
 
 WEB VIEWER  
						

							86_ web viewer
Split-Screen
Click split mode selection button to switch to the 
corresponding screen mode.
to switch to full screen mode
Click <  >. 
Current split screen appears in full screen. 
Press the [eSc] key to exit the full screen mode.
SINGLE MODESIXTEEN MODENINE MODEQUAD MODE
web viewer  
						

							English _87
changing the Live Screen Mode
 
`16-split mode does not support “Sequence”, “ Previous” and “Next”.
•	 : When this button is clicked, the previous screen appears.
 
- In SINGLE MODE, the channel numbers are switched in 
reverse order. 
 
- In QUAD MODE, the screens are changed like 1st 4 
channels (1~4)   2nd 4 channels (13~16)  
 
3rd 4 channels (9~12)   4th 4 channels (5~8). 
 
- In NINE MODE, the screens are changed from 9 channels (1~9) to 7 channels (10~16). 
•	
 : When this button is clicked, the next screen appears.
 
- In SINGLE MODE, the channel numbers are sequentially switched from 1 to 16.
 
- In QUAD MODE, the screens are changed like 1st 4 channels (1~4)   2nd 4 channels (5~8)  
 
3rd 4 channels (9~12)  4th 4 channels (13~16). 
 
- In NINE MODE, the screens are changed from 9 channels (1~9) to 7 channels (10~16). 
•	 : When this button is clicked, screens are switched at a preset interval. 
 
- In SINGLE MODE, the channel numbers are sequentially 
switched from 1 to 16. 
 
- In QUAD MODE, the screens are changed like 
 
1st 4 channels (1~4)   2nd 4 channels (5~8)   
3rd 4 channels (9~12)   4th 4 channels (13~16). 
 
- In NINE MODE, the screens are changed from 9 channels 
(1~9) to 7 channels (10~16). 
 
`Default setting time (10 seconds)
t o capture a screen
1.  Click <  > button. 
When a pop-up window appears, select the saving path for 
captured image.
2.  Select the path and name the file. And then click the  
button.
3.  Save current camera’s video image as .bmp, .jpg or .png file. 
 
J 
`If the viewer is running without the administrator’s permission in 
Windows Vista/7, you may not save the captured image as .
bmp, .jpg or .png file.
 
 WEB VIEWER  
						

							88_ web viewer
to print a screen
1.  Click <  > button.
2.  Print current camera’s video image with the printer 
connected to the PC operating the Web Viewer.
to save as AVI
1.  Click <  > button. 
When “AVI Setup” window appears, select the record 
saving path and capacity.
2.  Select a desired path, enter the maximum recording 
capacity, and then click  button.
 
`Save current channel’s video as AVI file. For playing a video clip, 
you can use the free video player to play the video.   
(ex: GOM Player, KM Player, etc.)
 
`After saving an AVI file, install the CODEC when playing it in Windows Media Player.
 
`However, the video may not played properly, depending on the CODEC compliance of the player.  
At least 1GB of free space is required for recording.
 
J 
`While recording current data in Web Viewer, you cannot select Split Mode buttons, switch to the previous/next 
screen, or activate Auto Sequence function.
 
`If the viewer is running without the administrator’s permission in Windows Vista / 7, you may not change a folder 
when saving a video as AVI file.
Audio
•	 : Sets audio of each connected channel to On/Off.
oSd
•	 : Select Show OSD on the Live screen.
web viewer  
						

							English _89
controLLIng A connected PtZ cAMerA
controlling PtZ
If PTZ camera is connected, the <  > icon appears on screen. When selecting corresponding camera 
channel, the PTZ tab is provided to allow you to control the PTZ.
Part Names Functions
aDirection Adjustment
Adjusts the direction of a camera.
bPT SpeedAdjusts the PAN, TILT reaction speed.
cPresetSets the preset position for camera framing and moves to designated preset position 
when selecting a desired preset.
dSwing
Moves between the preset start point and end point.
eGroupMoves in the path specified by combining the preset, pattern and auto pan.
fTourMoves in the path specified by combining multiple groups.
gTraceMoves camera’s framing in the predefined path.
hPowerPTZ Click or drag on the screen to control PTZ.
iFocusAdjusts the focus of the camera.
jIRISAdjusts image’s brightness by controling the camera’s iris.
kZOOMZooms in/out the image by controling camera’s zoom.
a
b
dcefgh
k
i
j
 
 WEB VIEWER  
						

							90_ web viewer
to set a preset
1.  Click <  > button to display “Preset” window.
2.  Click <
  > to select a desired preset number.
3.  Enter the name of preset.
4.  Use direction keys to adjust the direction which camera 
aims at.
5.  Click the  button.
to activate the preset
1.  Click <  > button to display “Preset” window.
2.  Select a desired preset to activate from the list.
 
The camera’s framing moves to the preset position.
to activate Swing, group, t our and trace
You can activate listed functions in the same manner as using a preset. For more information, refer to 
corresponding user manul of applicable camera.
 
M 
`Only selective functions of the camera can be supported, depending on camera.
web viewer