Samsung Sp A600b User Manual

Using3-5
3-5-4. Option
MENUDESCRIPTION
Language You can select the language used for the menu screen.
Menu Position You can move Menu Position up/down/left/right.
Menu Transparency You can set the transparency of menu.
• -  -  -  
Menu Display Time You can set the display time of the menu.
•  -  -  -  -  -  -  
Auto Power On If the power is supplied to the projector, it is turned on automatically without pressing the Power but-
ton.
•  -  
Sleep Timer If there is no input signal for the specified time,...

4-1Troubleshooting
4 Troubleshooting
4-1 Before Requesting Service
 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest 
Samsung Electronics Service Center.
 
Symptoms Troubleshooting
Installation 
and Con-
nection No Power. Check the power cable connections. 
I want to install my projector on the ceiling.  The ceiling installation support is sold separately. Contact your 
local product distributor. 
External Source can not be selected....

Troubleshooting4-1
Screen and 
External 
Source Cannot see picture images. Be sure that the power cord of the projector is connected.
Be sure that the proper input source is selected.
Check that the connectors are properly connected to the ports 
at the back of the projector.
Check the Remote Control batteries.
Be sure that the ,  settings are not at their 
lower limit.
Poor color.  Adjust the  and . 
Images are not clear. Adjust the focus. 
Check that the projection distance is either too far or too...

5-1More Information 
5More Information
5-1 Specifications
 This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for 
residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less 
electromagnetic waves than class A.
  The DMD Panel used in DLP Projectors consists of several hundred thousand micro mirrors. As with other visual display 
elements, the DMD Panel may include a few bad pixels....

More Information5-2
5-2 RS-232C Command Table
Communication Format (Complies with the RS232C Standard)
• Baud rate : 9,600 bps 
• parity : None
• Data bits : 8, stop bit : 1
• Flow Control : None
Serial Communication Protocol
1.Command Packet Structure [7bytes]
• A command packet consists of 7 bytes in total.
• The two bytes 0x08 and 0x22 signify that the packet is for serial communication.
• The following 4 bytes represent a pre-defined command that can be defined by the user.
• The last byte is the...

5-2More Information 
Command Table
CONTROL ITEMCMD1CMD2CMD3VALUE
General Power Power Display OSD 0x00 0x00 0x00 0
OK 1
Cancel 2
Input Source List HDMI HDMI 1 0x0A 0x00 0x01 0
HDMI 2 1
Component Component 0x02 0
S-Video S-Video 0x03 0
Video Video 0x04 0
PC PC 0x05 0
CONTROL ITEMCMD1CMD2CMD3VALUE
Picture Mode Vivid 0x0B 0X00 0x00 0
Dynamic 0X00 0X00 1
Standard 2
Movie13
Movie24
User15
User26
User37
Contrast 0~100 0X01 0x00 (0~100)
Brightness 0~100 0X02 0x00 (0~100)
Sharpness 0~100 0X03 0x00 (0~100)
Color...

More Information5-2
Picture Save User1 Display OSD 0x0B 0x09 0x00 0
OK 1
Cancel 2
User2 Display OSD 0x01 0
OK 1
Cancel 2
User3 Display OSD 0x02 0
OK 1
Cancel 2
Reset 0x0A 0x00 0
Size 16:9 0x0B 0x00 0
Zoom11
Zoom22
Wide Fit 3
Anamorphic 4
4:35
Digital NR Off 0x0C 0x00 0
On1
Black Level 0 IRE/NOR-
MAL0x0D 0x00 0
7.5 IRE/LOW 1
Color Pattern Off 0x0E 0x00 0
Monochrome 1
Red2
Green3
Blue4
Overscan Off 0x0F 0x00 0
On1
1080/24fps 
Mode Off 0x10 0x00 0
On1
Film Mode Off 0x11 0x00 0
On1
Position (Continuous) LEFT...

5-2More Information 
CONTROL ITEMCMD1CMD2CMD3VALUE
Setup install Front-Floor 0x0C 0x00 0x00 0
Front-Ceiling 1
Rear-Floor 2
Rear-Ceiling 3
Lamp Mode Theater 0x01 0x00 0
Bright1
V-Keystone -50~50 0x02 0x00 (0~100)
Background Logo 0x03 0x00 0
Blue1
Black2
Test Pattern  Crosshatch 0x04 0x00 0
Screen size 1
Red2
Green3
Blue4
White5
6500K_Whit
e6
Off7
PC Auto Adjust-
ment0x05 0x00 0
Coarse UP 0x06 0x00 0
DOWN 1
Fine UP 0x07 0x00 0
DOWN 1
Reset Display OSD 0x08 0x00 0
OK 1
Cancel 2
Zoom X1 0x09 0x00 0
X21
X32...

More Information5-2
Setup Color Stan-
dardHD 0x0C 0x0B 0x00 0
SMPTE-C 1
EBU2
Factory 
Default Display OSD 0x0C 0x00 0
OK1
Cancel2
Option Language English 0x0D 0x00 0x00 0
Deutsch 1
Nederlands 2
Español 3
Français 4
Italiano5
Svenska 6
Português 7
Русский8
中国语9
中國語 （繁
體）A
한국어B
Menu Posi-
tion LEFT 0x01 0x00 0
RIGHT1
UP2
DOWN3
Menu Trans-
parency High 0x02 0x00 0
Medium 1
Low2
Opaque 3
Menu Dis-
play Time 5 sec 0x03 0x00 0
10 sec1
30 sec2
60 sec3
90 sec4
120 sec 5
Stay On 6
CONTROL ITEMCMD1CMD2CMD3VALUE...

5-3More Information 
5-3 Contact SAMSUNG WORLDWIDE
 •If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care 
center.
 
Option Auto Power 
On OFF 0x0D 0x04 0x00 0
ON1
Sleep Timer OFF 0x05 0x00 0
10 min1
20 min2
30 min3
LED Indica-
torOFF 0x06 0x00 0
ON1
Buzz OFF 0x07 0x00 0
ON1
Information 0x08 0x00 0
NORTH AMERICA
U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us
CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca
MEXICO...