Samsung Sp A600b User Manual

Installation and Connection2-2
2-2 Installing the Projector
 Install the projector so that the beam from the projector is perpendicular to the screen. 
•Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the 
screen may not be a rectangle. 
•Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed 
clearly.
•When installing the screen in bright surroundings,...

2-4Installation and Connection  
2-4 Zoom and Focus Adjustment 
 If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection 
Distance), the focus cannot be adjusted correctly.
 
2-5 Screen Size and Projection Distance 
Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If 
images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector...

Installation and Connection2-6
 This projector is designed to show images optimally on a 100 ~ 120 inch screen.
 
2-6 Lamp Replacement
Cautions on Lamp Replacement
• The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. 
You can view the lamp usage time in the Information Display (INFO button).
• Use the recommended lamp when replacing. Replace with the same model provided with the projector.
- Lamp Model Name : 220W Philips fusion lamp...

2-6Installation and Connection  
Lamp Replacement Procedure
1.The lamp is very hot and operates with a high voltage. Allow it to cool down for at least 1 hour after disconnecting the power 
cord before changing the lamp.
2.The lamp is located at the bottom of the product.
Place the product so that its bottom looks upward and remove the screws that hold the lamp cover in place.
* When placing the product with the bottom upwards, make sure to place a soft cloth on the surface to prevent scratches.
3.Slide...

Installation and Connection2-7
2-7 Connecting with a PC 
1.Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable.
2.When connections are all completed, connect both power cords of the projector and the PC.
 This product supports plug and play and therefore, if you use Windows XP, you do not need to setup the driver on your PC. 
Using the Projector 
1.Turn on the projector and press the [PC] button to select .
If PC Mode is not available, check...

2-9Installation and Connection  
3.Press the [Advanced] button. Another property window will appear.
4.Click on [Monitor] tab and set the  by referring to  described in the Supported 
Resolution/Size Modes table. 
This will set both the vertical and horizontal frequencies.
5.Click the [OK] button to close the window, and click the [OK] button of the  window to close the window. 
The computer may restart automatically. 
6.Shut down the PC and connect to the projector.
 •Process might vary depending on...

Installation and Connection2-9
MAC 640 x 48067Hz35.000 66.667 30.240 -/-
VESA GTF 640 x 48070Hz35.000 70.000 28.560
VESA 
DMT 640 x 48072Hz37.861 72.809 31.500 -/-
VESA 
DMT 640 x 48075Hz37.500 75.000 31.500 -/-
VESA CVT720 x 57660Hz35.910 59.950 32.750 -/+
VESA 
DMT800 x 60056Hz35.156 56.250 36.000 +/+ 
VESA 
DMT800 x 60060Hz37.879 60.317 40.000 +/+ 
VESA GTF800 x 60070Hz43.750 70.000 45.500
VESA 
DMT800 x 60072Hz48.077 72.188 50.000 +/+ 
VESA 
DMT800 x 60075Hz46.875 75.000 49.500 +/+ 
MAC832 x...

2-10Installation and Connection  
2-10 Connecting the Power
VESA 
DMT1280 x 80060Hz 60.000 60.000 108.000 +/+ 
VESA GTF1280 x 96070Hz 69.930 70.000 120.839
VESA GTF1280 x 96072Hz 72.072 72.000 124.540
VESA CVT1280 x 96075Hz 75.231 74.857130.000-/+ 
VESA 
DMT1280 x 102460Hz 63.981 60.020 108.000 +/+ 
VESA GTF1280 x 102470Hz 74.620 70.000 128.943
VESA GTF1280 x 102472Hz 76.824 72.000 132.752
VESA 
DMT1280 x 102475Hz 79.976 75.025 135.000 +/+ 
VESA 
DMT1440 x 90060Hz 55.935 59.887 106.500 -/+ 
VESA 
DMT1440...

Installation and Connection2-11
1.Plug the power cord into the power terminal on the rear side of the projector. 
2-11 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI
1.Connecting using an HDMI/DVI cable
•Connect the [HDMI 1/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/
Satellite box using an HDMI/DVI cable.
Connecting using an HDMI cable
• Connect the [HDMI 1/DVI IN] or [HDMI IN 2] terminal on the back of the projector and the HDMI output...

2-13Installation and Connection  
2-13 Connecting to VCR/Camcorder
1.Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using a video 
cable.
If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector. 
Using the S-VIDEO connection provides a higher visual quality.
2.When finishing connecting the devices, connect the power of the projector and the VCR/Camcorder.
Using the Projector 
1.Turn on the projector and...