Samsung Sp L220 User Manual

 
Downloaded From projector-manual.com Samsung Manuals 

 
To avoid injuries or damage to property, please read the following precautions carefully and use the 
product accordingly. 
Failure to follow the instructions marked with this symbol may cause personal in jury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.  
 
 
 
|  Power Related  | 
Installation Related  | 
Cleaning and Use Related  | 
    
 
  
  [The images here are for reference only, and 
are not...

out from the mains socket, therefore the mains plug shall be readily 
operable. 
zThere is a danger of electric shock or fire.  
 
  
Always unplug the unit by holdin g the power plug. Pulling the power 
cable may damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug befo re cleaning the product. 
zThere is a danger of electric shock or fire.  
  
 
 
 |  Power Related | 
Installation Related | 
Cleaning and Use Related | 
 
 
 
 
  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES...

  Do not install on an unstable location, or on a stand smaller than the 
product. 
zIf the product falls it may harm children.  Install on a flat and stable location as 
the front part is heavy.  
  
In case of thunder/lightning, disconnect the power cord from the 
wall outlet.  
zThere is a danger of electric shock or fire.  
 
  
Make sure the products vents are  not blocked by a table cloth or 
curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on the ground...

disconnect the power cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product near flammable sprays or other such 
substances.  
zThere is a danger of fire or explosion.  
  
Do not place containers with water, vases, drinks, chemicals, small 
metal parts or heavy objects on the product. 
zIf water enters the product, it may cause  electric...

product using a soft dry cloth. 
zDo not use any chemicals such as wax, be nzene, alcohol, thinners, insecticide, 
air freshener, lubricant or detergent.  
  
When not using the product for an extended period of time, 
disconnect the power plug. 
zOtherwise, this may cause heat emission  from the accumulated dirt or degraded 
insulation, leading to electric shock or fire.  
  
If the product is dropped or the casing is damaged, turn the product 
off and unplug the power cord.  
zThis may cause electric...

Correct disposal of batteries in this product - Europe only 
(Applicable in the European Union and other European countries with separate battery 
return systems.)  
This marking on the battery, manual or packaging indicates that the batteries in this product 
should not be disposed of with other househol d waste at the end of their working life. Where 
marked, the chemical symbols 
Hg, Cd or Pb indicate that the battery contains mercury, cadmium 
or lead above the reference levels in EC Directive...

 
 
 |  Product Features | 
Product Views | 
Remote Control  | 
Product Specifications  | 
 
 
 
 
 
 
 
 
 An optical engine adopting new LCD technology  
 
  - 1024 x 768 panel has been adapted.  
- Utilizes a 3P-LCD panel.  
- SP-L250 : Provides a bright screen of 2500 lumen. 
  SP-L220 : Provides a bright screen of 2200 lumen. 
  SP-L200 : Provides a bright screen of 2000 lumen. 
- Compact size, lightweight, and good portability
  
 
 Minimized fan noise  
 
  - Minimizes the noise generated by the...

 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the  LED Indications . 
  
2. VOL - / + & Select and Move Button 
Adjusts the volume. 
Use this button to move to or select an item within a 
menu. 
  
3. MENU  Button 
Use this button to enter or exit a menu or to move 
forward in a menu.  
  
4. SOURCE Button  
Used to select input si gnals from the external 
sources. 
     
  
5. 
POWER( ) Button  
Used to turn the projector on or off.  
  
6. Lens...

Power Cable Remote Control/ 1 Batteries (CR2025)  
(Not available in all locations)  Cleaning Cloth 
   
   
   
 
  
D-Sub Cable       
  
   
 
 
 
   LED Indications   
 
 :Light is On       :Light is  Blinking      :Light is Off
STAND 
BY  LAMP TEMP 
Information 
If you press the POWER button on the remote control or projector, the screen 
appears within 30 seconds.
The projector is in normal operating condition. 
This state appears when the projector is prep aring an operation after the POWER button...