Samsung Sp L220 User Manual

 
 
  - The [PC OUT] function also operates in standby mode.  
 
 Connecting an AV device using a D-Sub cable
 
 
 
 
 
First, check that the AV device an d your projector are turned off. 
Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cab le. 
  - For supported input signals, refer to the  AV Timing (D-Sub).  
Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the  projector to the Audio out terminal of your AV device...

 
 
Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the projector and the Audio out terminal of your AV device using an 
audio cable (Not supplied). 
   Connecting using a Video/S-Video cable
 
 
 
 
 
First, check that the AV device an d your projector are turned off. 
Connect the [VIDEO] or [S-VIDEO] terminal an d the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied).
  - For supported input signals, refer to the  AV Timing(VIDEO/S-VIDEO).  
Connect the [AV IN...

 
 
  
Downloaded From projector-manual.com Samsung Manuals 

 
 
 |  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
 
 
Turning on the projector  
   Check that the lens cover is opened completely. 
 Turn the power on. 
 Check that the STAND BY LE
D indicator is turned on. 
 Press the Power button. While the power is turned on  (with the Power button on the remote control or at the 
    top of the projector), the  blue LAMP LED indicator blinks.  
    When the power is turned on comple tely, the LAMP LED indicator remains blue. 
If the projector is...

 
 
* Click the Play( )/Stop( ) button in the 
table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Source List  You can select a device connected to the projector to display. 
 
1) PC 1   3) AV 
2) PC 2  4) S-Video 
Edit Name You can edit the names of devices connected to the projector. 
 
1) VCR  7) DVD Receiver
2) DVD   8) Game
3) Cable STB   9) Camcorder
4) HD STB  10) DVD Combo 
5) Satellite STB  11) PC
6) AV Receiver    
 
 
 
|  Basic Functions | 
Input | 
Picture |...

     This mode is a customized mode created using the 
Mode > Save function.
▶ Presentation and Text modes are only enabled if the input signal is a  PC 
Timing  signal.
2) Contrast  : Used to adjust the contrast betw een the object and the background. 
3) Brightness  : Used to adjust brightness of the entire picture.
4) Sharpness  : Used to adjust the sh arpness of the picture.
▶  When the input signal is PC Timing , the Sharpness cannot be 
adjusted.  
5) Color  : Used to adjust colo r lighter or...

▶This is not supported in [AV] and [S-Video] modes. 
▶This is supported only when the input signal is  AV Timing(D-Sub) . 
▶If Overscan is turned off, unnecessary  extra parts at the edges of an image may 
a
lso be shown, though you can view more of the area .  
In 

this case, turn Overscan on.  
 
Film Mode         Using this function, you can set the display mode so it is optimized for\
 playing movies.
 
▶

 Film Mode can only be supported for the [AV], [S-Video], 480i, and 576i of  AV 
Timing(D-Sub)...

 
 
This mode decreases the lamp brightness and power consumption in order to extend 
the lamp lifetime and reduce noise and power consumption.
  2) Bright  : This mode maximizes the lamp brightness when the ambient illumination is 
bright. As the brightness of the lamp increa ses, the lamp lifetime can be reduced and 
the noise and power consumption may increase. Eco 
Bright
V-Keystone  If video scenes are distorted or tilted, you can compensate for this using the vertical 
Keystone function. 
▶  The...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Language You can select the Language used for the menu screen. 
 
Menu Option
1) Position
You can move Menu Position up/down/left/right.  
 
2) Transparency
You can set the translucency of menu. 
- Low 
- Medium 
- High 
- Opaque 
 
3) Display Time
You can set the display time of the menu.  
- 5 sec / 10 sec / 30 sec / 60 sec / 90 sec / 120 sec / Stay On  
 
Position
Transparency...

 
 
2) On
Sleep Timer If there is no input signal for the specified  time, the projector is turned off automatically. 
(But, for the specified time, there must be no  button input from the remote control or the top 
of the projector)  
1) Off 
2) 10 min 
3) 20 min 
4) 30 min 
Information You can check external source signals, picture setup, PC picture ad justment and lamp use 
time.  
 
Downloaded From projector-manual.com Samsung Manuals