Samsung Sp L220 User Manual

							 
 
  - The [PC OUT] function also operates in standby mode.  
 
 Connecting an AV device using a D-Sub cable
 
 
 
 
 
First, check that the AV device an d your projector are turned off. 
Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cab le. 
  - For supported input signals, refer to the  AV Timing (D-Sub).  
Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the  projector to the Audio out terminal of your AV device using an 
audio cable (Not supplied). 
 
   
Connecting an AV device with component output
 
 
 
 
 
First, check that the AV device an d your projector are turned off. 
Connect the [PC IN (1 or 2) PC] terminal at the back of the projector to the Co mponent terminal of your AV device using a D-
Sub/Component cable (Not supplied). 
  - For supported input signals, refer to the  AV Timing(D-Sub).  
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
Connect the [PC IN (1 or 2) AUDIO] terminal at the back of the projector and the Audio out terminal of your AV device using an 
audio cable (Not supplied). 
   Connecting using a Video/S-Video cable
 
 
 
 
 
First, check that the AV device an d your projector are turned off. 
Connect the [VIDEO] or [S-VIDEO] terminal an d the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied).
  - For supported input signals, refer to the  AV Timing(VIDEO/S-VIDEO).  
Connect the [AV IN R-AUDIO-L] terminal at th e back of the projector and the Audio out terminal of your AV device using an audio 
cable (Not supplied). 
   Connecting an External Speaker
 
 
 
 
 
You can hear sound through an external speaker instead  of the internal speaker embedded in the projector.  
Prepare an audio cable (Not supplied) suitable for your external speaker. 
Connect the [AUDIO OUT] terminal  of the projector to the external speaker using an audio cable. 
  - 
When using an external speaker, the internal speaker does not operate, b\
ut  you can  adjust the volume of the external speaker 
u

sing the Volume button of the projector (or remote control). 
  - The [AUDIO OUT] terminal can output all audio signals. 
 
 
 
 
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
  
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
 |  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
 
 
Turning on the projector  
   Check that the lens cover is opened completely. 
 Turn the power on. 
 Check that the STAND BY LE
D indicator is turned on. 
 Press the Power button. While the power is turned on  (with the Power button on the remote control or at the 
    top of the projector), the  blue LAMP LED indicator blinks.  
    When the power is turned on comple tely, the LAMP LED indicator remains blue. 
If the projector is turned on when the lamp is no t sufficiently cooled, a temporary loud noise may be 
heard because the fan speed increases to cool the lamp.  
Turning off the projector  
    Press the Power button. (With 
the remote 
control or on top  of the projector) OK or Cancel is displayed.    
 Select OK using the arrow 

keys (With 
the remote control or on top of the projector). 
   

Pres

s the Enter button or press the Power button again. 
The STAND BY LED indicator is turned  off and the LAMP LED indicator blinks. 
   The fan speed increases to cool the lamp  quickly. When the operation is finished,  
    the LAMP LED indicator is turned off and the ST AND BY LED indicator is turned on and remains blue. 
 Remove the power cord. 
 Close the lens cover. 
Selecting an input source  
   Press the SOURCE button (on the remote co ntrol or at the top of the projector).  
  AV and S-Video modes can only be selected when an 
external device is connected. PC1 and PC2 modes can 
     be selected regardless of  an external device being connected. 
 
 
 
|  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
* Click the Play( )/Stop( ) button in the 
table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Source List  You can select a device connected to the projector to display. 
 
1) PC 1   3) AV 
2) PC 2  4) S-Video 
Edit Name You can edit the names of devices connected to the projector. 
 
1) VCR  7) DVD Receiver
2) DVD   8) Game
3) Cable STB   9) Camcorder
4) HD STB  10) DVD Combo 
5) Satellite STB  11) PC
6) AV Receiver    
 
 
 
|  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
* Click the Play( )/Stop( ) button in the 
table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Mode Select a screen state which is customized to  your projector or change the screen mode as 
required.  
 
1) Mode 
- Standard   
    
This picture mode is the most general mode and works well in most situat\
ions.
-

 Presentation 
    This mode is suitable for presentations.
- Text   
    This mode is suitable for text work.
- Movie  
    This mode is suitable for viewing a movie.
- Game   
    This picture mode is optimized for playing games. 
      ▶ The text in a still picture may be displayed unnaturally.
  - User
  
Mode 
Downloaded From projector-manual.com Samsung Manuals 
						

							     This mode is a customized mode created using the 
Mode > Save function.
▶ Presentation and Text modes are only enabled if the input signal is a  PC 
Timing  signal.
2) Contrast  : Used to adjust the contrast betw een the object and the background. 
3) Brightness  : Used to adjust brightness of the entire picture.
4) Sharpness  : Used to adjust the sh arpness of the picture.
▶  When the input signal is PC Timing , the Sharpness cannot be 
adjusted.  
5) Color  : Used to adjust colo r lighter or darker.
▶  When the input signal is PC Timing , the Color cannot be adjusted. 
6) Tint  : Used to obtain more natural color of  objects using Green or Red enhancement. 
▶  When the input signal is PC Timing  and PAL and SECAM of the  
[S-Video] and [AV] modes, the color cannot be adjusted.  
 Contrast  
Brightness 
Sharpness  Color  
Tint  
7) Color Temperature  : You can select the color temperature according to your 
preferences.  
  -   Factory defaults: 5500K, 6500K, 8000K, 9300K 
- 
You can select the color temperature for the items below according to your 
preferences.
  R-Gain, G-Gain, B-Gain : Adjusts the  color temperature of the White level. 
R-Offset, G-Offset, B-Offset : Adjusts th e color temperature of the Black level.
1) Color Temperature   5) R-Offset 
2) R-Gain   6) G-Offset 
3) G-Gain  7) B-Offset 
4) B-Gain   
 Color  
Temperature
 R-Gain 
G-Gain  B-Gain 
R-Offset  
G-Offset 
B-Offset 
8) Gamma  : Changes the brightness characteristic  for each color tone of an image.  
 
  -  The larger (+) the value, the greater the co
ntrast of the bright and dark parts; the 
smaller (-) the value, the darker the dark parts.  
-  Adjustable range: -3 to +3
 Gamma  
9) Save  :You can save the status of a screen you adjusted according to your preferences 
using the  Mode > User  OSD. 
 Save  
10) Reset  : Restores the mode settings to the factory defaults. 
 Reset  
Size You can select a screen size according to the type of scene.  
▶ When the input signal is  PC Timing, Zoom1/Zoom2 is not supported.   
1) Normal 
2) Zoom1 
3) Zoom2 
4) 16:9 
 
Position Adjust the screen position if it is not aligned.   
Digital NR When a dotted line is displayed or the screen shakes, you can view a better visual quality 
picture by enabling Noise Reduction.  
▶ When the input signal is  PC Timing, Digital NR does not operate.  
Black LevelYou can select the signal black level according to  the input signal. If it is unsuitable for the 
input signal, the dark parts may not be 
shown clearly or may be dim.   
▶

 The Black level can only be set for the 480i and 576i RGB signals of [AV],  
[S-Video] and  AV Timing(D-Sub)  modes. 
 
-  For [AV],[S-Video] and the 480i and 576i signals of AV Timing(D-Sub) . 
1) 0 IRE  : Sets the black level to 0 IRE
2) 7.5 IRE  : Sets the black level to 7.5 IRE
Overscan Using this function, you can cu t the edge of the picture when unnecessary information, 
images appear on the edge of the picture. 
Downloaded From projector-manual.com Samsung Manuals 
						

							▶This is not supported in [AV] and [S-Video] modes. 
▶This is supported only when the input signal is  AV Timing(D-Sub) . 
▶If Overscan is turned off, unnecessary  extra parts at the edges of an image may 
a
lso be shown, though you can view more of the area .  
In 

this case, turn Overscan on.  
 
Film Mode         Using this function, you can set the display mode so it is optimized for\
 playing movies.
 
▶

 Film Mode can only be supported for the [AV], [S-Video], 480i, and 576i of  AV 
Timing(D-Sub) signals .   
1) Off 
2) On 
PC
Eliminates or reduces noise that causes unstable  screen quality, such as screen shaking. If 
the noise is not removed using Fine Adjustme nt, adjust the frequency to the maximum and 
then perform Fine Adjustment again.  
▶  It is only enabled for the PC Timing input of the D-Sub terminal.  
▶  Refer to  PC Timing .  
1) Auto Adjustment :  Used to adjust frequency and ph ase of PC screen automatically.
2) Coarse :  Used to adjust frequency when vertical lines appear on PC screen. 
3) Fine :  Used to fine tune the PC screen.
4) Reset :  Using this function, you can reset the PC  menu settings to the factory default 
settings.
Auto 
Adjustment  
Coarse  
Fine    
Reset  
Zoom  Enlarges the PC screen to 2X, 4X, or 8X. 
▶ This can only be adjusted when the input signal is  PC Timing.
 
 
 
|  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
* Click the Play( )/Stop( ) button in the 
table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Install To tailor the picture to the installation lo cation, you can invert the projected images 
vertically/horizontally. 
 
  1) Front-Floor  : Normal Image
  2) Front-Ceiling  : Horizontal/Vertical Reversed Image
  3) Rear-Floor  : Horizontally Reversed Image
  4) Rear-Ceiling  : Vertically Reversed Image
Lamp Mode  Used to set the image brightness by adjusting  the amount of light generated by the lamp.  
 
  1) Eco  : This mode is optimized for small screens smaller than 100 inches.  
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
This mode decreases the lamp brightness and power consumption in order to extend 
the lamp lifetime and reduce noise and power consumption.
  2) Bright  : This mode maximizes the lamp brightness when the ambient illumination is 
bright. As the brightness of the lamp increa ses, the lamp lifetime can be reduced and 
the noise and power consumption may increase. Eco 
Bright
V-Keystone  If video scenes are distorted or tilted, you can compensate for this using the vertical 
Keystone function. 
▶  The sound output of your projector is te mporarily stopped while the keystone is 
being changed.   
▶  The keystone is not compensated fo r in the On Screen Display (OSD). 
BackgroundYou can set the Background that is displayed when  there is no signal from the external device 
connected to the projector.If a signal is re ceived, the Background you set disappears and a 
normal screen is displayed. 
1) Logo 
2) Blue 
3) Black 
Test Pattern Generated by the projector itself. Utilized as st andard to optimize the installation of the 
projector. 
 
  1) Crosshatch  : You can check whether the picture is distorted or not.
  2) Screen Size  : You can refer to picture format sizes such as 1.33:1 or 1.78:1.  
 
Crosshatch
Screen 
Size 
Video Type          Allows you to set the type of input signal when your projector fails to \
determine this  
automatically in PC mode.  
 
  ▶In 

[PC] mode, this is only enabled if the input signal is  AV Timing(D-Sub). 
However, for a separate H/V sync., this is only enabled for 
1280 x 720p 
59.9

4 Hz/60 Hz signals.  
1) Auto
2) RGB(PC)
3) RGB(AV)
4) YPbPr(AV)
UsageColor, 
Sharpness,Tint PC menu and  zoom
RGB(PC) When connecting the RGB output of a PC 
to the D-Sub terminal  Disable Enable 
RGB(AV) 
When connecting the RGB output of an 
AV device (STB, DVD, etc…) to the D-
Sub terminal  Enable Enable 
YPbPr(AV) 
When connecting the YPbPr output of an 
AV device (STB, DVD, etc…) to the D-
Sub terminal  Enable Disable 
Auto Auto settings - - 
 
Reset Using this function, you can  reset various settings to the factory default settings.  
 
1) Factory Default  : Changes the settings to the factory defaults.
2) Reset Filter Time  : Resets the filter time. 
   
Factory 
Default
 
Reset Filter Time
 
 
  |  Basic Functions | 
Input | 
Picture | 
Setup | 
Option | 
 
 
Downloaded From projector-manual.com Samsung Manuals 
						

							* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description Play/Stop 
Language You can select the Language used for the menu screen. 
 
Menu Option
1) Position
You can move Menu Position up/down/left/right.  
 
2) Transparency
You can set the translucency of menu. 
- Low 
- Medium 
- High 
- Opaque 
 
3) Display Time
You can set the display time of the menu.  
- 5 sec / 10 sec / 30 sec / 60 sec / 90 sec / 120 sec / Stay On  
 
Position
Transparency
Display Time
Sound Adjusts the right and left audio balance and eq ualizer of the 3W stereo speaker embedded in 
the projector. 
 
1) Balance  4) 1kHz 
2) 100Hz  5) 3kHz 
3) 300Hz  6) 10kHz
Filter Check 
Time Sets the check period for the filter. (Unit: hour) 
 
 1) Off 
2) 100 
3) 200 
4) 400 
5) 800 
▶ If the filter usage time is larger than the filter check period, the filter check 
message is displayed for a minute whenever the projector is turned on.  
▶ Filter check message: Check the filter, an
d if necessary, clean or replace it.. 
Auto Power OnIf the power is supplied to the projector, it is  turned on automatically without pressing the 
Power button. 
 
1) Off
Downloaded From projector-manual.com Samsung Manuals 
						

							 
 
2) On
Sleep Timer If there is no input signal for the specified  time, the projector is turned off automatically. 
(But, for the specified time, there must be no  button input from the remote control or the top 
of the projector)  
1) Off 
2) 10 min 
3) 20 min 
4) 30 min 
Information You can check external source signals, picture setup, PC picture ad justment and lamp use 
time.  
 
Downloaded From projector-manual.com Samsung Manuals