Samsung Sp M220 User Manual

Installation and Connection2-15
2-15 Connecting using a Video cable
Make sure that the AV device and your projector are turned off.
1.
Connect the AV device to the [VIDEO] port using a VIDEO cable (not supplied).
- For supported input signal formats, see AV Timing (VIDEO) in section 2-8, Supported Display Modes.
2.Connect the [AUDIO IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device 
using an audio cable (Not supplied).
Downloaded From projector-manual.com...

2-16Installation and Connection
2-16 Connecting an External Speaker
You can hear sound through an external speaker instead of the internal speakers built into the projector. 
1.Obtain an audio cable (Not supplied) suitable for your external speaker.
2.Connect the [AUDIO OUT/ ] terminal of the projector to the external speaker using an audio cable.
- When using an external speaker, the internal speaker does not operate but you can adjust the volume of the external 
speaker using the Volume button or the...

Installation and Connection2-17
2-17 Kensington Lock slot
The Kensington Lock slot allows you to lock your projector, providing a sense of security when you use it in a public place. 
Because the shape and usage of the lock may differ depending on the model and the manufacturer, see the User Manual 
supplied with the locking device for more information.
Locking the product
1.Loop the Kensington lock cable around an immovable part of desk or heavy object as directed in the Kensington lock user 
manual....

3-1Using
3Using
3-1 Product Features 
1.An optical engine adopting new LCD technology
• 1024 x 768 resolution. 
• 3P-LCD panel.
• SP-M200 : Provides a bright, 2000 lumen screen. 
• SP-M220 : Provides a bright, 2200 lumen screen. 
• SP-M250 : Provides a bright, 2500 lumen screen.
2.Minimized fan noise 
• Minimizes fan noise through optimized internal air flow and the fan installation structure.
3.Multiple input terminals 
• Increases the connectivity to peripheral devices such as D-Sub 15P (supporting DTV...

Using3-2
3-2 Front, Upper
 NAMEDESCRIPTION
1.Indicators- STAND BY (Blue LED) 
- LAMP (Blue LED)
- STATUS (Green/Red/Yellow LED) 
 Refer to the LED Indications. 
2. Move   / Select   /
Volume  button  /  : Use to move or to select an item within a menu. 
 : Use to adjust the volume.
3. MENU buttonUse to display the Menu Screen.
4. SOURCE buttonUse to select the external device signal. 
5.  
POWER button Use to turn the projector on or off. 
6. Zoom Knob Use to enlarge or reduce image size.
7. Focus Ring...

3-3Using
3-3 Remote Control 
 Using your projector with another remote control device nearby may result in improper functioning due to 
remote control code (frequency) interference.
 
1. POWER () Button 
Use this button for turning the product on and off. 
2. AUTO Button 
Adjusts the Picture automatically. (Available in  Mode Only) 
3. MENU () Button 
Use to display the Menu Screen.
4. Move ()/ () Buttons  
Used to move to or select each menu item.
5. V. KEYSTONE Button  ( )
Use this when the screen is...

Using3-4
3-4 LED Indications 
LED Indications 
:Light is On  :Light is Blinking  :Light is Off
STATUSLAMPSTAND BYSTATUS
If you press the [POWER] button on the remote control or projector, the screen
appears within 30 seconds.
The projector is operating normally. 
The projector is preparing an operation after the [POWER] button on the projec-
tor or the remote control has been pressed.
The [POWER] button has been pressed to turn off the projector, and the cool-
ing system is in operation to cool off the...

3-4Using
Clearing Indicator Problems 
 This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may produce noise, 
This does not affect product performance and is part of normal operation.
 
CLASSIFICA
TIONSTATEMEASURES
Action 1 The cooling fan system is not 
operating normally.If the symptom remains even after disconnecting and then reconnecting 
the power cord and turning the projector on again, contact your product 
provider or our service center....

Using3-5
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) 
The Screen Adjustment Menu (OSD: On Screen Display) Structure
To access the Menu, press the Menu button on the product or on the remote. To move in the menu, press the arrow buttons. 
Menu selections with an arrow on the far right have sub-menus. Press the right arrow button to access the sub-menu. Directions 
for navigating and selecting items in a menu are at the bottom of each menu screen. 
 3-5-1. Input
 3-5-2. Picture...

3-5Using
MENUDESCRIPTION
Mode Select a screen mode to match the environment, the kind of images you are projecting, or select a 
customized mode you have created based on your requirements. 

•  : Selects the picture for increased definition in a bright room.
•  : Selects the picture for the optimum display in a normal environment.
•  : This mode is suitable for presentations.
•  : This mode is suitable for text work. 
•  : This mode is suitable for viewing a movie.
•  : This picture mode is optimized...