Samsung Syncmaster 152v Quick Start Guide

							SyncMaster 153V/173V/152V/172V/193V/192V/153S/173S/153B/173B
 
						

							 
 
 
Main PageOn-Screen Display
Safety InstructionsTroubleshooting
NotationalCheck List
PowerQ & A
InstallationSelf-Test Feature Check
Cleaning
Other
IntroductionSpecifications
UnpackingGeneral Specifications
FrontPowerSaver
RearPreset Display Modes
SetupInformation
Connecting Your MonitorService
Installing the Monitor DriverTerms
AutomaticRegulatory
ManualNatural Color
Installing VESA compliant mountingFor Better Display
Authority
 
						

							Notational
Power
Installation
Clean
Other
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily\
 harm or damage to 
equipment.
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet
Do not touchGrounding to prevent an electric shock
 
						

							Notational
Power
Installation
Clean
Other
 
 
 
When not used for extended periods of time, set your PC to DPMS. If usin\
g 
a screen saver, set it to the active screen mode. 
 
Do not use a damaged or loose plug.  
zThis may cause an electric shock or fire. 
Do not pull the plug out by the wire nor touch the plug with wet 
hands. 
zThis may cause an electric shock or fire. 
Use only a properly grounded plug and reoeptacle.  
zAn improper ground may cause electric shock or equipment 
damage. 
Do not excessively bend the plug and wire nor place heavy objects 
upon them, which could cause damage. 
zFailure to do so may cause an electric shock or fire. 
Disconnect the plug from the outlet during storms or lightening or 
if it is not used for a long period of time.  
zFailure to do so may cause an electric shock or fire. 
Do not connect too many extension cords or plugs to an outlet.  
zThis may cause a fire. 
 
						

							Notational
Power
Installation
Clean
Other
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire. 
Put your monitor in a location with low humidity and a minimum of 
dust. 
zAn electric shock or fire could result inside the monitor. 
Do not drop the monitor when moving it.  
zThis may cause damage to the product or human body.  
Place the monitor on a flat and stable surface. 
zThe monitor can cause injury by falling. 
Set down the monitor carefully. 
zIt could be damaged or broken. 
Do not place the monitor face down.  
zThe CDT surface may be damaged. 
 
						

							Notational
Power
Installation
Clean
Other
 
 
 
When cleaning the monitor case or the surface of the TFT-LCD, wipe with \
a 
slightly moistened, soft fabric.
Do not spray detergent directly on the monitor.  
Use the recommended detergent with a smooth cloth.  
If the connector between the plug and the pin is dusty or dirty, 
clean it properly with a dry cloth. 
zA dirty connector can cause an electric shock or fire. 
Do not set a glass of water, chemicals or any small metal objects 
on the monitor. 
zThis may cause damage, electric shock or a fire.  
zIf a foreign substance gets into the monitor, disconnect the plug 
and then contact a service center .  
 
						

							Notational
Power
Installation
Clean
Other 
 
Do not remove cover(or back). No user serviceable parts inside.  
zThis may cause an electric shock or a fire.  
zRefer servicing to qualified service personnel. 
If your monitor does not operate normally - in particular, if there 
are any unusual sounds or smells coming from it - unplug it 
immediately and contact an authorized dealer or service . 
zThis may cause an electric shock or a fire. 
Do not place any heavy objects on the monitor.  
zThis may cause an electric shock or a fire. 
For each hour of looking at the monitor, you should let your eyes 
rest for 5 minutes. 
zThis will reduce eye fatigue. 
Do not use or store inflammable substances near the monitor.  
zThis may cause an explosion or fire. 
Do not try to move the monitor by pulling on the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock or a fire due to 
damage to the cable. 
Do not move the monitor right or left by pulling only the wire or the 
signal cable. 
zThis may cause a breakdown, electric shock or a fire due to 
damage to the cable. 
Never insert anything metallic into the monitor openings.  
zThis may cause an electric shock, fire or injury.  
Keep all power adaptors apart. 
 
						

							zPossible fire hazard. 
Keep power adaptor away from any other heat source. 
zPossible fire hazard. 
Remove and discard vinyl bag from power adaptor before use. 
zPossible fire hazard. 
Always keep power adaptor in well-ventilated area. 
If you view a fixed screen for an extended period of time, residual 
image or blurriness may appear. 
zChange the mode to energy save or set a screensaver to moving 
picture when you need to be away from the monitor for an 
extended period of time. 
 
						

							Notational
Power
Installation
Clean
Other 
 
Do not remove cover(or back). No user serviceable parts inside.  
zThis may cause an electric shock or a fire.  
zRefer servicing to qualified service personnel. 
If your monitor does not operate normally - in particular, if there 
are any unusual sounds or smells coming from it - unplug it 
immediately and contact an authorized dealer or service . 
zThis may cause an electric shock or a fire. 
Do not place any heavy objects on the monitor.  
zThis may cause an electric shock or a fire. 
For each hour of looking at the monitor, you should let your eyes 
rest for 5 minutes. 
zThis will reduce eye fatigue. 
Do not use or store inflammable substances near the monitor.  
zThis may cause an explosion or fire. 
Do not try to move the monitor by pulling on the wire or the signal 
cable. 
zThis may cause a breakdown, electric shock or a fire due to 
damage to the cable. 
Do not move the monitor right or left by pulling only the wire or the 
signal cable. 
zThis may cause a breakdown, electric shock or a fire due to 
damage to the cable. 
Never insert anything metallic into the monitor openings.  
zThis may cause an electric shock, fire or injury.  
Keep all power adaptors apart. 
 
						

							zPossible fire hazard. 
Keep power adaptor away from any other heat source. 
zPossible fire hazard. 
Remove and discard vinyl bag from power adaptor before use. 
zPossible fire hazard. 
Always keep power adaptor in well-ventilated area. 
If you view a fixed screen for an extended period of time, residual 
image or blurriness may appear. 
zChange the mode to energy save or set a screensaver to moving 
picture when you need to be away from the monitor for an 
extended period of time.