Sanyo Ce32fd90b User Manual

							 English   - 10 -
 
 
 
Viewing the Connections - Side Connectors 
 
CI Slot is used for inserting a CI card. A CI card allows you  1. 
to view all the channels that you subscribe to. For more 
information, see “Conditional Access” section.  
Side USB input  
.   2. 
Note: Codec update cannot be performed.
   
Headphone jack is used for connecting an external  3. 
headphone to the system. Connect to the HEADPHONE 
jack to listen to the TV from headphones (optional).  
Video Input is used for connecting video signals of  4. 
external devices.Connect the video cable between the 
VIDEO IN socket on the TV and the VIDEO OUT jack on 
your device.  
Audio Inputs are used for connecting audio signals of  5. 
external devices. Connect the audio cable between the 
AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks 
on your device. Note: If you connect a device to the TV via 
the VIDEO INPUT, you should also connect your device 
with an audio cable to the AUDIO INPUTS of the TV to 
enable audio.  
 
 
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   10MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1015.04.2009   18:56:3615.04.2009   18:56:36 
						

							English   - 11 -
 
 
 
Power Connection 
 
 
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz. 
  • After unpacking, allow the TV set to reach the ambient room temperature before you connect 
the set to the mains. 
  • Plug the power cable to the mains socket outlet. 
 
Aerial Connection 
 
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV. 
 
    
 
REAR VIEW
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   11MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1115.04.2009   18:56:3815.04.2009   18:56:38 
						

							 English   - 12 -
 
 
 
 
Using Digital Multimedia Connectors
 
• You can connect USB devices to your TV by using the USB input of the TV. This feature allows 
you to display/play JPG and MP3 fi les stored in a USB stick.
• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with 
this TV. 
• You may back up your fi les before making any connections to the TV set in order to avoid any 
possible data loss. Note that manufacturer will not be responsible for any fi le damage or data 
loss.
 • Do not pull out USB module while playing a fi le.
  CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. 
Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical 
damage to the USB player and especially the USB device itself . 
  SIDE VIEW        USB MEMORY 
 
 
  USB Memory Connection 
 
• Plug your USB device to the USB input of the TV. 
  Note: USB hard disk drives are not supported. 
  • It is recommended that you connect your USB device directly to the USB input of the TV. Some 
compatibility problems may occur if you use a separate cable connection. 
 
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   12MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1215.04.2009   18:56:3915.04.2009   18:56:39 
						

							English   - 13 -
 
 
 
   
 
Connecting the LCD TV to a PC 
 
For displaying your computer’s screen image on your LCD TV, you can connect your computer 
to the TV set. 
  • Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When the connection is made, switch to PC source. See  “Input selection” section.
• Set the resolution that suits your viewing requirements. Resolution information can be found in 
the appendix parts. 
  REAR VIEW 
 
 
 
PC audio cable
(not supplied)
to AUDIO INPUTS 
on the TVPC RGB cable
(not supplied)
to PC input
Audio
InputsPC Input
 
 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   13MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1315.04.2009   18:56:3915.04.2009   18:56:39 
						

							 English   - 14 -
 
 
Connecting to a DVD Player 
 
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD 
players may have different connectors. Please refer to your DVD player’s instruction book for 
additional information. Power off both the TV and the device before making any connections. 
  Note: Cables shown in the illustration are not supplied. 
 
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD 
player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video 
cable to connect  video input. For enabling audio, use a component audio cable as illustrated 
below. When the connection is made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown 
below. 
 
 
Note 
: These three methods of connection perform the same function but in different levels of quality. It is not 
necessary to connect by all three methods. 
  
   
 
HDMI
inputs Scart socketsComponent 
video
inputsComponent 
audio
inputs
DVD Player 
  REAR VIEW  
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   14MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1415.04.2009   18:56:4115.04.2009   18:56:41 
						

							English   - 15 -
 
 
Using Side AV Connectors 
 
You can connect a range of optional equipment to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are not supplied. 
   
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS.  For 
selecting the related source, see the section “Input selection” in the following parts. 
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV. 
 
 
Camcorder Headphone
   
  SIDE VIEW 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   15MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1515.04.2009   18:56:4115.04.2009   18:56:41 
						

							 English   - 16 -
 
 
 
Using Other Connectors
 
 
You can connect a range of optional equipment to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are not supplied. 
  • To connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and AUDIO 
RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are made. 
Refer to your speaker set’s manual for further queries.
• For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable 
sound connection. 
   
 
External Speakers
A device that 
supports 
SPDIF signal.
 
 
 
  REAR VIEW
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   16MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1615.04.2009   18:56:4315.04.2009   18:56:43 
						

							English   - 17 -
 
 
 
 
Connecting Other Equipment via Scart
 
 
Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder 
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not 
supplied. 
Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book. 
  REAR VIEW 
 
 
 
Scart sockets
Decoder
DVD RecorderVideo Recorder
   
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   17MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1715.04.2009   18:56:4315.04.2009   18:56:43 
						

							English   - 18 -
 
 
Inserting Batteries in the 
Remote Control Handset
   
• Remove the battery cover located on the back 
of the handset by gently pulling backwards 
from the indicated part.
   
• Insert two  AAA/R3 
 or equivalent type batteries 
inside. Place the batteries in the right directions 
and replace the battery cover. 
 
 
   
Note 
: Remove the battery from remote control 
handset when it is not to be used for a long period. 
Otherwise it can be damaged due to any leakage of 
batteries. 
   
 
Operating Range for the 
Remote Control
   
• Point the top of the remote control toward the 
LCD TV’s remote sensor LED while pressing 
a button. 
 
 
30 30
TV DTV
MINFO
12
3
45
6
78
9
0
-/--
EXIT
SWAP
P
						

							English   - 19 -
 
 
 
 
Input Selection
 
 
Once you have connected external systems 
to your TV, you can switch to different input 
sources. 
  • Press “
” button on your remote control for 
directly changing sources. 
  or,
   
• Select “Source” option from the main menu 
by using “
” or “” button. Use then “” or 
“
” button to highlight an input and press “
” button to select. 
   
Note 
: You can mark desired source options by 
pressing the  OK 
 button. Therefore, when “
” button 
is pressed, only the marked source options will be 
available (except for the TV source). 
    
 
 
Basic Operations 
  You can operate your TV using both the 
remote control and onset buttons. 
  Operation with the Buttons on the TV 
 
Volume Setting 
  • Press “
” button to decrease volume or 
 button to increase volume, so a volume 
level scale (slider) will be displayed on the 
screen. 
  Programme Selection 
  • Press “ P/CH + 
” button to select the next 
programme or “ P/CH - 
” button to select the 
previous programme. 
  Viewing Main Menu 
  • Press the “ M 
” button to enter main menu. In 
the Main menu select sub-menu using “ P/CH 
- 
” or “ P/CH + 
” buttons and enter the sub-menu 
using “
” or “” buttons. To learn the 
usage of the menus, refer to the menu system 
sections.   AV Mode 
  • Press the “ TV/AV 
” button in the control panel 
on the TV to switch between AV modes. 
  Operation with the Remote Control 
 
• The remote control of your TV is designed 
to control all the functions of the model you 
selected. The functions will be described in 
accordance with the menu system of your 
TV. 
  • Functions of the menu system are described 
in the following sections. 
  Volume Setting 
  • Press “
” button to increase the volume. 
Press “
 button to decrease the volume. 
A volume level scale (slider) will be displayed 
on the screen. 
  Programme Selection (Previous or Next 
Programme) 
  • Press “ P - 
” button to select the previous 
programme.  
  • Press “ P + 
” button to select the next 
programme. 
  Programme Selection (Direct Access) 
  • Press numeric buttons on the remote control 
to select programmes between 0 and 9. The 
TV will switch to the selected programme. 
To select programmes between 10 - 299 
(for IDTV) or 10-199 (for analogue), press 
the numeric buttons consecutively (e.g. for 
programme 27, first press 2 and then 7). 
When the pressing time is due for the second 
numeric button, only the fi rst digit programme 
will be displayed. The limit of the delay time 
is 3 seconds.
   
• Press directly the programme number to 
reselect single digit programmes. 
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   19MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd   1915.04.2009   18:56:4515.04.2009   18:56:45