Sanyo DP42841, DP46841 Hdtv Lcd Owners Manual

2Need help? www.sanyoctv.com              1-800-877-5032
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety...

3Need help? www.sanyoctv.com              1-800-877-5032
PC RESOLUTION CHART
FCC INFORMATION __________
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation.  This equipment gen-
erates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may...

4Need help? www.sanyoctv.com              1-800-877-5032
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 2
FCC INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TRADEMARKS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PC RESOLUTIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
CONTENTS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
SPECIFICATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4...

5Need help? www.sanyoctv.com              1-800-877-5032
Hook up your antenna or your cable service to the
HDTV’s ANTterminal with the use of a 75 OHM
coaxial cable.
NOTE: Keep your indoor antenna at least 3 ft. away
from the television set and any other electronic
equipment.
The tuner in this HDTV can receive:
• 
Digital and Analog off air signals from an antenna
• Analog or ClearQAM cable channels from a direct
Cable TV connection.
GETTING STARTED
Install two (2) “AAA” batteries in the remote control....

6Need help? www.sanyoctv.com              1-800-877-5032
GETTING STARTED
HDTV INPUT/OUTPUT REFERENCE
HDTV BACK PANEL
7
3
1
2
5
HDMI (INPUT1, INPUT2, & INPUT3)
An all digital AV interface that can accept uncompressed
video signals up to 1080p for the very best picture possible.
NOTE: A DVI connection is possible via the HDMI (DVI)
INPUT1 using an appropriate adapter and connecting
the audio signal to AUDIO mini stereo jack.
USB Input
View pictures stored in a USB flash drive.
PC Input
Monitor RGB (D-SUB)...

7Need help? www.sanyoctv.com              1-800-877-5032
GETTING STARTED
AUDIO / VIDEO CONNECTIONS
DVD PLAYER 
(or similar device)
VCR 
(or analog device)
MULTICHANNEL
RECEIVER
NOTE: Audio/Video cables
are not supplied COMPONENTconnections will accept
SDTV, EDTV and HDTV video signals. Use
them for great image quality from digital
devices such as a DVD player or Video
Game system.
Match your digital device’s Component 
output jacks to either of the two (2)
Component input jack sets (VIDEO2 or
VIDEO3) on...

8Need help? www.sanyoctv.com              1-800-877-5032
REMOTE CONTROL OPERATION
Turns your HDTV On or Off. Selects the video source to view. Holding
down the key displays the Input List.
Modifies the Energy Saverlevel (see page
10 for details.)Selects the desired Audio mode.
Stereo, Mono, or SAP (when available.)
Displays the current switch on time (see
Clock Timeron page 10 for details.) Cycles through the available Caption
modes (when available.)
Pressing it twice restores your HDTV to its
factory...

9Need help? www.sanyoctv.com              1-800-877-5032
1. PLUG IN AC POWER CORD
120V AC, 60Hz
2. TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
3. TV SET LOCATION SELECTION:
Select “Home Mode” by pressing the CHkey to set
the HDTV’s backlight to an Energy Star qualified
level, or select “Store Mode” by pressing CHto set
the backlight to a retail display level.
4. CHANNEL AND AV SIGNAL SEARCH:
Press...

10Need help? www.sanyoctv.com              1-800-877-5032
CHANNEL SETTING(CONTINUED)
ON-SCREEN MENU OPERATION
Input Setting feature allows the removal of unused
inputs from the AV input loop.
Use the CURSORkeys to select an AV input. Press
ENTERto disable (uncheck) or enable (check) the high-
lighted  input.
NOTE: At least one input must and will remain checked.
:Skip is for reference only.
Input Setting
Use this feature to establish either a Component or
Composite connection to the VIDEO INPUT 2 jacks...