Sanyo Plc Xl50a Projector User Manual

Computer Input
Use the Point 7 8 buttons to adjust the horizontal area 
displayed by this projector. Display area H
Use the Point 7 8 buttons to adjust the vertical area 
displayed by this projector. Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store the adjusted data, select “Store” and then press 
the SELECT button. Move the red arrow pointer to one of 
the Mode 1 to 5 in which you want to store, and then press 
the SELECT button.
To reset the adjusted data, select “Reset” and press the...

Computer Input
Select an image level from among Dynamic, Standard, Real, 
Blackboard (Green), Colorboard, Image 1, Image 2, Image 3, 
or Image 4 with the IMAGE button on the remote control.
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Normal picture level preset on the projector.  
Picture level with improved halftone for graphics. Standard
Real
Image 1–4
Image Level Selection 
Direct Operation
Image 4
Blackboard (Green)
For viewing the image projected on a blackboard. This mode 
assists to enhance...

33
Computer Input
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Image Select Menu icon.1
2Use the Point ed buttons to move the red frame  
pointer to the desired level and then press the SELECT 
button.
Normal picture level preset on this projector. Standard
Picture level with improved halftone for graphics.Real
Blackboard(Green)
Menu Operation
User preset image in the Image Adjust Menu (p.35).Image 1–4
For viewing pictures in a...

Computer Input
Use the Point 7 8 buttons to 
adjust the value.
Press the MENU button to display the On-Screen 
Menu.  Use the Point 
7 8 buttons to move the red 
frame pointer to the Image Adjust Menu icon.1
2Use the Point ed buttons to move the red frame  
pointer to the desired item, and then press the 
SELECT button.  The level of each item is displayed. 
Use the Point 
7 8 buttons to adjust each level.
Move the red frame pointer 
to the desired item and then 
press the SELECT button.
Image Adjust...

Computer Input
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select “Store” and press the 
SELECT button. The Image Level Menu appears. Use the 
Point 
ed buttons to choose one of the four image level and 
press the SELECT button. A confirmation box appears and 
then select “Yes.”
The stored data can be called up by selecting “Image” in 
the Image Level Selection on pages 32-33.
Move the red frame 
pointer to the desired 
image level (from Image 
1 to 4) and then press 
the SELECT...

Computer Input
When Digital zoom + is selected, the On-Screen Menu 
disappears and “D. zoom +” is displayed. Press the SELECT 
button to expand the image size. Use the Point 
ed7 8 
buttons to pan the image. The Panning function can work 
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the 
D.ZOOM 
e button on the remote control. 
Digital zoom +
Digital zoom - is used to reduce the image size into its 
original size when the image size is expanded....

Press the INPUT button on the top control or VIDEO button 
on the remote control to select “Video.”
Before using the INPUT or VIDEO buttons, select the 
correct input source through menu operation as described 
below.
Use the MENU button to display the On-Screen Menu. 
Press the Point 
7 8 buttons to move the red frame 
pointer to the Input Menu icon.
Use the Point ed buttons to move the red arrow 
pointer to Video and then press the SELECT button to 
display the Source Select Menu . 
1
2
Move the...

INPUT button
Top ControlINPUT button
Video
Computer 2*
Computer 1
Video Input
Press the INPUT button on the top control or COMPUTER 
button on the remote control to select Computer 1.
Before using INPUT or COMPUTER buttons, select the 
correct input source through Menu operation as described 
below.
Use the MENU button to display the On-Screen Menu. 
Press the Point 
7 8 buttons to move the red frame 
pointer to the Input Menu icon.1
Computer  1
Input Menu
Use the Point ed buttons to move the red arrow...

Video Input
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the AV System Menu icon.1
Video System Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point ed buttons to move the red arrow 
pointer to the desired system and then press the 
SELECT button.2
If the projector cannot reproduce proper video image,  
select a specific broadcast signal format from among PAL, 
SECAM, NTSC, NTSC 4.43, PAL-M, and...

Video Input
Select an image level from among Dynamic, Standard, 
Cinema, Blackboard (Green), Colorboard, Image 1, Image 
2, Image 3, and Image 4 with the IMAGE button on the 
remote control.
Normal picture level preset on this projector.   Standard
Picture level adjusted for the picture with fine tone. Cinema
Blackboard(Green)
User preset image in the Image Adjust Menu (pp.42-43). Image 1–4
IMAGE button
Dynamic
Cinema
Image 1
Image 2
Image 3
Image 4
Image Level Selection 
Direct Operation
For viewing the...