Sanyo Plc Xl50a Projector User Manual

41
Use the MENU button to display the On-Screen Menu. 
Press the Point 
7 8 buttons to move the red frame 
pointer to the Image Select Menu icon.1
2Use the Point ed buttons to move the red frame  
pointer to the desired level and then press the SELECT 
button.
Normal picture level preset on this projector. Standard
Picture level adjusted for the picture with fine tone.Cinema
Blackboard (Green)
User preset image in the Image Adjust Menu (pp.42-43).Image1–4
Menu Operation
For viewing picture in a bright...

Video Input
Use  the  Point 7  8  buttons 
to adjust the value.
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Image Adjust Menu icon.1
2Use the Point ed buttons to move the red frame  
pointer to the desired item and then press the SELECT 
button. The level of each item is displayed. Adjust each 
level by pressing the Point 
7 8 buttons.Move the red frame pointer 
t o   t h e   d e s i r e d   i t e m   a n d 
t h e n   p r e s s...

43
Video Input
To store the adjusted data, select Store and press the 
SELECT button. Select a level from Image 1 to 4 with 
the Point 
ed buttons and press the SELECT button. A 
confirmation box appears and then select “Yes.”
Stored data can be called up by selecting “Image” in the 
Image Level Selection on pages 40-41.
Image Level Menu
Move the red frame pointer to 
an image item to be set and 
then press the SELECT button.
To reset the adjusted data, select Reset and press the 
SELECT button. A...

44
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Screen Menu icon.
Use the Point ed buttons and move the red frame  
pointer to the desired function and then press the 
SELECT button.
1
2
Move the red frame pointer to the 
desired function and press the 
SELECT button.
Screen Menu
Screen Menu icon
Provide the image at a...

45
Keystone
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available 
in English, German, French, Italian, Spanish, Portuguese, 
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, 
Russian, Chinese, Korean, or Japanese.
Set the red framed 
pointer to the item 
and press the 
SELECT button.
Use the Point ed buttons to move the red frame  
pointer to the item...

46
Display Blue back
Press the Point 7 8 buttons to switch on/off. When this 
function is “On,” a blue image is displayed while the input 
signal is not detected. 
Press the Point 7 8 buttons to switch on/off. This function 
decides to display the On-Screen Displays. On …………………  Display all the On-Screen Displays. 
Use this function when you want 
to project images after the lamp 
becomes bright enough. This mode is 
set as a default.
Countdown off…        Display the input image instead of 
the...

47
Setting
Capture
This function enables you to capture the image being 
projected and use it for a start-up display or interval of 
presentations.  
After capturing the projected image, go to the Logo 
select function and set it to “User.” Then the captured 
image is displayed when the projector is turned on next 
time or the NO SHOW button is pressed (p 26).
To capture the image, select “Yes.” To cancel the Capture 
function, select “No.”
Select "Yes" to capture 
the projected image. 
Select...

48
Logo PIN code lock Dialog Box
Enter a Logo PIN code
Select a number by pressing the Point ed buttons.  
And then press the Point 
8 button to fix the number 
and move the pointer.  The number changes to "✳".  If 
you fixed an incorrect number, move the pointer to the 
number you want to correct by pressing the Point 
7 
button, and then select the correct number by pressing 
the Point 
ed buttons.
Repeat this step to complete entering a four-digit 
number.
After entering the four-digit number,...

49
Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture is top/bottom 
and left/right reversed.  This function is used to project the 
image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture is left/right 
reversed.  This function is used to project the image to a 
rear projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back 
of the projector is switchable for computer input or monitor 
output (p.10).  Select Computer 2...

50
Setting
Time left before Lamp is off.
Press the SELECT button 
at Power management and 
this box appears.  Select 
one of three settings with 
the Point 
7 8 buttons, and 
go to the timer with the 
Point 
ed buttons and set 
time with the Point 
7 8 
buttons.
Power management
On start
Power management
For reducing power consumption as well as maintaining 
the lamp life, the Power management function turns off the 
projection lamp when the input signal is interrupted and no 
button is pressed for a...