Sanyo Projector Plc Wxu700 User Manual
Have a look at the manual Sanyo Projector Plc Wxu700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Video Input Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu Use the Point ▲▼ buttons to select Computer 1 and then press the Point ► button; use the Point ▲▼ buttons to select HDMI , and then press the SELECT button. Input Source Selection (Component, RGB Scart 1-pin, HDMI) When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart) . RGB (Scart) Direct Operation Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Note: • Network is for the Network function. See the owner’s manual of “Network Set-up and Operation” . • When the Input Search function is set to On1 or On , the input signal will be searched automatically (p.48). COMPUTER button Top ControlINPUT button Remote Control 3When Computer 1 is selected, use the Point ▲▼ buttons to select Component or RGB(Scart) and then press the SELECT button. Computer 1 Computer When the video signal is connected to the HDMI terminal, select HDMI.HDMI HDMI button HDMI Computer 1 HDMI Computer S-video Network Video COMPUTER can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.
4 Video Input Video System Selection 1AV System Menu (Video or S-video) AV System Menu (Component) If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC , NTSC 4 .43 , PAL-M and PAL-N. PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce proper video image, select a specific component video signal format among 480i, 575i , 480p , 575p, 70p, 1035i and 1080i. Auto COMPONENT VIDEO SIGNAL FORMAT Video or S-video Component The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. Auto Note: The AV System Menu cannot be selected when selecting RGB (Scart). HDMIVideoS-videoNetwork Wired 1 Video Component Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Video , S-video or Computer 1(Component) and then press the SELECT button. 3Use the Point ▲▼ buttons to select System and then press the Point ► or SELECT button. Use the Point ▲ ▼ buttons to select the desired system and then press SELECT button.
43 Image Select Menu Select the desired image mode among Dynamic, Standard , Cinema, Blackboard (Green) , Colorboard, Image 1, Image , Image 3 and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode adjusted with fine tone. Cinema Blackboard (Green) Image 1–4 IMAGE button Dynamic Cinema Image Mode Selection Blackboard (Green) Dynamic Standard Remote Control IMAGE button Direct Operation For viewing pictures in a bright room. Normal picture mode preset on the projector. For viewing with the user preset image mode in the Image adjust Menu (see pages 44-45). This Image memory is provided in each computer, component and video input source. 1 Menu Operation Image 1 Image Image 3 Image 4 Colorboard Colorboard Use the Point ▲▼ buttons to select Colorboard and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Video Input For the image projected on a blackboard. This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
44 Video Input Image Adjustment 1 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point ◄ button to lighten red tone; press the Point ► button to deepen red tone (from 0 to 63). White balance (Red) Press the Point ◄ button to lighten green tone; press the Point ► button to deepen green tone (from 0 to 63). White balance (Green) Press the Point ◄ button to lighten blue tone; press the Point ► button to deepen blue tone (from 0 to 63). White balance (Blue) Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid or High ). Color temp . Press the Point ◄ button decrease the intensity of the color; press the Point ►button increase the intensity of the color (from 0 to 63). Press the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color Tint Note: • When White balance Red , Green or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL , SECAM , PAL-M or PAL-N (p.42). • When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to Blackboard or Colorboard. Image adjust Menu ResetStore Selected Image mode Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. ResetStore Use the Point ◄► buttons to adjust the setting value.
45 Video Input Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ......... Disabled. L1 .......... For an active picture. L .......... For a still picture. Film ....... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Progressive Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ......... Disabled. L1 .......... Lower reduction. L .......... Higher reduction. Note: Noise reduction and Progressive cannot be selected when 480p , 575p, 70p , 1035i or 1080i is selected (p.42). To reset the adjusted data, select Reset and press the Point ► or the SELECT button. A confirmation box appears and then select yes . All adjustments will return to their previous figures. Reset Store To store the adjusted data, select Store and press the SELECT button. Use the Point ▲▼ buttons to select one from Images 1 to 4 and press the SELECT button. A confirmation box appears and then select yes . Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 43. A confirmation box appears and then select yes . Store Menu
46 Video Input This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Size Adjustment Screen Menu1 Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Custom Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V ................... When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust the Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V .....Adjust the Horizontal/Vertical screen position. Common ........... Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at yes , When Custom is selected, the saved scale is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes . Note: • When no signal is detected, Normal is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. • Wide , Zoom and Natural wide cannot be operated when 70p, 1035i or 1080i is selected in the AV System Menu (p.42). Wide Provide the image at the 16:9 wide screen ratio. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or SELECT button Use the Point ▲▼ buttons select the desired item and then press the SELECT button. Full Provide the full screen image. Zoom Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9). Only for 4:3 video aspect ratio signals. Natural wide Modify the 4:3 aspect ratio image to fit the screen size(16:9 aspect ratio) by stretching the image to make it look natural.
47 HDMI setupTerminal Computer 2Pointer DotStandby mode Eco Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian , Russian, Chinese, Korean, japanese and Thai. Setting Menu Setting Setting HDMI setupTerminal Computer 2Pointer DotStandby mode Eco Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ► or the SELECT button to access the submenu items. 1 Use the Point ▲▼ buttons to select the desired item and then press the Point ► or the SELECT button to access the selected item. This projector has a Setting menu that allows you to set up the other various functions described below. Language Menu position This function is used to change the position of the On-Screen Menu. Select Menu position and press the Point ► or the SELECT button. The Menu position screen appears. The Menu position changes each time you press SELECT button as follows. the top left the top right the center the bottom left the bottom right the top left ..... 3Use the Point ▲▼ buttons to select the desired item and then press the SELECT button.
48 Setting Note: • Auto Keystone corrects vertical distortion only, not correct horizontal distortion. • The Auto Keystone function cannot work when the Ceiling feature is set On in the Setting menu (p.53). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp.26,49). • Fine sync , Total dots , Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35). Auto setup Input search This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options. Off ...... Input search will not work. On1 .... Input search works under the following situation. – When pressing the AUTO SETUP /CANCEL button on the top control. – When pressing the AUTO SET/CANCEL button on the remote control. On .... Input search works under the following situation. – When turning on the projector by pressing the ON/STAND-BY button on the top control or the remote control. – When pressing the AUTO SET/CANCEL button on the remote control. – When pressing the AUTO SETUP /CANCEL button on the top control. – When the current input signal is cut off.* * If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On- Screen menu is displayed. Auto PC adj . On. . . . . . Enables Auto PC adjustment when pressing the AUTO SET/CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control. Off. . . . . . Disables Auto PC adjustment. Auto Keystone Auto . . . . Always works and corrects keystone distortion according to the projector's tilt. Manual . . Works only when pressing the AUTO SETUP/ CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Off. . . . . . Disables Auto Keystone. HDMI setupTerminal Computer 2Pointer DotStandby mode Eco Auto setup Note: •While Input search is set to On1 or On , the status of Input and Lamp are displayed every time the signal is switched. •Only the last selected input source can be detected. •If the INPUT button on the top control or the HDMI, COMPUTER, VIDEO or NETWORK buttons on the remote control is pressed during Input search is in progress, Input search will stop and go back to the previous input signal. • Input search, Auto PC adj . and Auto Keystone cannot be set Off at the same time. This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP/ CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Settings for those functions can be altered as follows:
49 Keystone This function is used to store or reset the keystone correction when the AC power cord is unplugged. Store ....... Keep the keystone correction even when the AC power cord is unplugged. Reset ....... Release the keystone correction when the AC power cord is unplugged. To correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p.26). Background Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch between each option. Blue . . . Blue colored background. User. . . The image you captured. Black . . Black colored background. This function decides whether to display On-Screen Displays. On ........................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown Off....... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off ........................... Hide the On-Screen Displays except; ● On-Screen Menu ● Power off? (p.23) ● No signal for Power management (p.56) ● Please wait . . . ● Arrows for the True function in the Screen Menu (p.38) ● P-Timer Display Setting HDMI setupTerminal Computer 2Pointer DotStandby mode Eco Keystone
50 Setting Logo (Logo and Logo PIN code lock settings) HDMI setupTerminal Computer 2Pointer DotStandby mode Eco Logo select This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions. Note: When On is selected in the Logo PIN code lock function, Logo select , capture and Logo PIN code change cannot be selected. Logo select This function decides on the starting-up display from among following options. User ........ Show the image you captured. Default .... Show the factory-set logo. Off ........... Show the countdown display only. Off Off