Sanyo Projector Plc Xc50 User Manual

Multimedia Projector
MODEL PLC-XC50
           PLC-XC55
Owner's Manual 



Table of ContentsFeatures and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of  use. This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid crystal display (LCD) technology.
◆ Compatibility
  The projector widely accepts various video and 
computer  input  signals  including:  Computers, 6   C o l o r   s y s t e m s   ( PA L ,   S E C A M ,   N T S C ,...



Table of ContentsFeatures and Design
TrademarksEach  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation  6
Installing the...

4

Safety InstructionsTo the Owner
B e f o r e  o p e r a t i n g  t h i s  p r o j e c t o r,  r e a d  t h i s  m a n u a l thoroughly and operate the projector properly.This  projector  provides  many  convenient  features  and functions.  Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.Improper  operation  may  result  in  not  only  shortening  the product-life,  but  also  malfunctions,  fire  hazard,  or  other...

5

Safety Instructions
All  the  safety  and  operating  instructions  should  be  read before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them for  later  use.    Unplug  this  projector  from AC  power  supply before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e projector.
For  added  protection  to  the  projector  during  a...

6

ComplianceSafety Instructions
Openings in the cabinet are provided for ventilation and to ensure  reliable  operation  of  the  product  and  to  protect  it from overheating, and these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent.  When using or  installing  the  projector,  the  following  precautions should be taken. 
– Do  not  put  any  flammable  object  or  spray  can  near 
the  projector,  hot  air  is  exhausted  from  the  ventilation...

7

Compliance
Federal Communications Commission NoticeNote:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and  used  in  accordance  with  the  instructions,  may  cause  harmful...

8
Part Names and FunctionsPart Names and Functions
① Air Intake Vent
② Power Cord Connector
③ Infrared Remote Receiver
④ Focus Ring (front)
⑤ Lens and Lens cover
⑥	Zoom Ring (rear)
⑦ Slide Shutter
⑧ Exhaust Vent
CAUTIONHot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
⑨ Lamp Cover 
⑩ Speaker
⑪ Top Controls and Indicators
⑫ Terminals and Connectors
⑬ Filter Cover
⑭ Adjustable feet
	Kensington Security Slot
This  slot  is  for  a  Kensington  lock  used  to...


Part Names and FunctionsPart Names and Functions
Rear Terminal
③  MONITOR OUT
    This terminal can be used to output the incoming      R G B  s i g n a l  f r o m  C O M P U T E R  I N  1  /  D V I - I terminal  or  COMPUTER  IN  2/COMPONENT  IN terminal to the other monitor (p.14).
① CONTROL PORT
  When  the  projector  is  controlled  by  a  computer, 
connect to this jack with serial control cable.
② COMPUTER IN  / COMPONENT IN   
  Connect  output  signal  from  a  computer,  RGB 
scart...

10
Top Control
②	LAMP REPLACE indicator
	 Turn 	 yellow 	 when 	 the 	 life 	 of 	 the 	 projection 	 lamp 	
draws 	 to 	 an 	 end. 	 (pp.60, 	 71-72)
④	WARNING FILTER indicator
	 –	Blink 	 slow 	 when 	 the 	 filter 	 is 	 being 	 scrolled 	 . 	
(pp.57, 	 71)
	 –	B l i n k
	 f a s t 	 w h e n 	 t h e 	 f i l t e r 	 c a r t r i d g e 	 i s 	 n o t 	
installed. 	 (pp.57, 	 72)
	 –	Light
	 orange 	 when 	 the 	 clogging 	 of 	 the 	 filter 	 is 	
detected 	 or 	 the 	 filter 	 counter 	 reaches 	 a...