Sanyo Projector Plc Xc50 User Manual

							
Multimedia Projector
MODEL PLC-XC50
           PLC-XC55
Owner's Manual 
						

							


Table of ContentsFeatures and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of  use. This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid crystal display (LCD) technology.
◆ Compatibility
  The projector widely accepts various video and 
computer  input  signals  including:  Computers, 6   C o l o r   s y s t e m s   ( PA L ,   S E C A M ,   N T S C , NTSC4.43,  PAL-M,  and  PAL-N),  Component video, S-video and RGB scart.
◆ Simple Computer System Setting
  The  projector  has  the  Multi-scan  system  to 
conform  to  almost  all  computer  output  signals quickly. (p.27)
◆ Digital Zoom (for Computer)
  The  digital  zoom  function  expands  (to  approx. 
16  times  of  the  screen  size)  or  compresses ( t o  a p p r o x .  a  h a l f  o f  t h e  s c r e e n  s i z e )  t h e image  size,  allowing  you  to  focus  on  crucial information during the presentation. (p.36)
◆ Blackboard Function
  B l a c k b o a r d *  c a n  b e  u s e d  a s  a  p r o j e c t i o n 
screen.
 *The board color is limited to Green. (pp.31-32, 40-41)
◆ Colorboard Function
  This  enables  you  to  get  the  close  color  image 
to  the  color  image  projected  on  a  white  screen by  selecting  the  similar  color  to  the  wall  color from the preset four colors.
◆ Quick Termination
　 　T h e   A C   p o w e r   c o r d   c a n   b e   u n p l u g g e d i m m e d i a t e l y  a f t e r  t u r n i n g  o ff  t h e  p r o j e c t o r w i t h o u t  w a i t i n g  f o r  t h e  t e r m i n a t i o n  o f  t h e cooling fan rotation.
◆ Auto setup Function
  T h i s  f u n c t i o n  e n a b l e s  I n p u t  s e a r c h ,  A u t o 
Keystone  correction  and AUTO  PC  adjustment by simple pressing the AUTO SETUP button on the  top  control  or  the AUTO  SET  button  on  the remote control. (p.46)
Notes:
  • T h e  O n - S c r e e n  M e n u  a n d  f i g u r e s  i n  t h i s 
manual may differ slightly from the product.
  • The  contents  of  this  manual  are  subject  to 
change without notice.
◆ Multilanguage Menu Display
  Operation  menu  is  available  in  16  languages: 
English,  German,  French,  Italian,  Spanish, Portuguese,  Dutch,  Swedish,  Finnish,  Polish, H u n g a r i a n ,  R o m a n i a n ,  R u s s i a n ,  C h i n e s e , Korean, and Japanese. (p.45)
◆ Logo Function
  The  Logo  function  allows  you  to  customize  the 
screen logo with the Logo functions. (pp.48-49) You  can  capture  an  image  for  the  screen  logo, choose a logo between provided and captured. 
◆ Power Management
  T h e  P o w e r  m a n a g e m e n t  f u n c t i o n  r e d u c e s 
power  consumption  and  maintains  the  lamp life. (p.50)
◆ Lamp Control
  B r i g h t n e s s  o f  t h e  p r o j e c t i o n  l a m p  c a n  b e 
selected. (pp.24,51)
◆ Security Function
  T h e  S e c u r i t y  f u n c t i o n  h e l p s  y o u  t o  e n s u r e 
the  security  with  the  Key  lock  (p.53)  and  the PIN  code  lock  (pp.18,  53,  54)  functions.  You can  lock  the  operation  on  the  projector  and t h e  r e m o t e  c o n t r o l .  A l s o  y o u  c a n  p r e v e n t unauthorized persons from using the projector.
◆ Closed Caption
 This  is  a  printed  version  of  the  program  sound or  other  information  displayed  on  the  screen. You  can  turn  on  the  feature  and  switch  the channels.  (p.51) 
◆ Automatic Filter Replacement Function
 The  projector  monitors  the  condition  of  the filter  and  replaces  a  filter  automatically  when  it detects the clogging.  
						

							


Table of ContentsFeatures and Design
TrademarksEach  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation  6
Installing the Projector in Proper   
Position  6
Moving the Projector  6
Compliance .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Part Names and Functions   .  .  .  .  .  .  .  .8
Front  8
Back  8
Bottom  8
Rear Terminal  9
Top Control  10
Remote Control  11
Remote Control Battery Installation  12
Operating Range  12
Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1
Positioning the Projector  13
Adjustable Feet  13 
Connecting to a Computer  14
Connecting to Video Equipment  15
Connecting to Component Video 
and RGB (Scart) Equipment 16
Connecting the AC Power Cord  17
Basic Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18
Turning On the Projector  18
Turning Off the Projector  19
How to Operate the On-Screen Menu  20
Menu Bar  21
Zoom and Focus Adjustment  22
Auto setup function  22
Keystone Correction  22
Sound Adjustment  23
Remote Control Operation  23
Computer Input   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .5
Input Source Selection (RGB: Computer 1 
(Analog)/Computer 2 )  25
Input Source Selection (RGB(PC digital), 
RGB(AV HDCP))                                     26
Computer System Selection 27
Auto PC Adjustment  28
Manual PC Adjustment  29
Image Level Selection   31
Image Level Adjustment  33
Screen Size Adjustment  34
Video Input  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Input Source Selection (Video,S-video) 37
Input Source Selection 
 (Component, RGB Scart 21-pin)  38
Video System Selection  39
Image Level Selection   40
Image Level Adjustment  42
Screen Size Adjustment  44
Setting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .45
Setting  45
Maintenance and Care .  .  .  .  .  .  .  .  .  .  . .57
Filter Instructions  57
Replacing the Filter Cartridge  58
Resetting the Filter Counter                    59
Resetting the Scroll Counter 59
Lamp Replacement  60 
Resetting the Lamp Counter  62
Warning TEMP. indicator  63
Cleaning the Lens Cover  64
Cleaning the Projector Cabinet  64
Appendix .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .65
Troubleshooting  65
Menu Tree  68
Indicators and Projector Condition  71
Compatible Computer Specifications  73
Technical Specifications  75
Optional Parts  76
Configurations of Terminals  77
Dimensions                                             78
PIN Code Number Memo 79 
						

							
4

Safety InstructionsTo the Owner
B e f o r e  o p e r a t i n g  t h i s  p r o j e c t o r,  r e a d  t h i s  m a n u a l thoroughly and operate the projector properly.This  projector  provides  many  convenient  features  and functions.  Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.Improper  operation  may  result  in  not  only  shortening  the product-life,  but  also  malfunctions,  fire  hazard,  or  other accidents.If  your  projector  seems  to  operate  improperly,  read  this manual  again,  check  operations  and  cable  connections and  try  the  solutions  in  the  "Troubleshooting"  section  on pages  65-67  of  this  manual.    If  the  problem  still  persists, contact  the  dealer  where  you  purchased  the  projector  or the service center.
CAUTION: T O   R E D U C E   T H E   R I S K   O F   E L E C T R I C         S H O C K ,   D O   N O T   R E M O V E   C O V E R   ( O R 
B A C K ) .    N O  U S E R - S E RV I C E A B L E  PA R T S 
I N S I D E   E X C E P T   L A M P  R E P L A C E M E N T  . 
REFER  SERVICING  TO  QUALIFIED  SERVICE 
PERSONNEL .
T H I S   S Y M B O L  I N D I C AT E S   T H AT  D A N G E R O U S V O LTA G E  C O N S T I T U T I N G  A  R I S K  O F  E L E C T R I C SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S   S Y M B O L  I N D I C AT E S   T H AT   T H E R E   A R E I M P O R TA N T  O P E R AT I N G   A N D   M A I N T E N A N C E INSTRUCTIONS  IN  THE  OWNER'S  MANUAL  WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
NOTE: This  symbol  and  recycle  system  are  applied  to  EU countries only and not applied to the countries in the other area of the world.
Yo u r  S A N Y O  p r o d u c t  i s  d e s i g n e d and  manufactured  with  high  quality materials  and  components  which  can be recycled and reused.
This  symbol  means  that  electrical  and electronic  equipment,  at  their  end-of-life,  should  be  disposed  of  separately from your household waste.
P l e a s e   d i s p o s e   o f   t h i s   e q u i p m e n t  a t   y o u r   l o c a l community  waste  collection/recycling  centre.    In  the European  Union  there  are  separate  collection  systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
Safety Precaution
WARNING:    ● THIS APPARATUS MUST BE EARTHED.                       ● TO REDUCE THE RISK OF FIRE OR ELECTRIC                             SHOCK, DO NOT EXPOSE THIS APPLIANCE TO   
                          RAIN OR MOISTURE .
–  This projector produces intense light from the projection lens.    Do  not  stare  directly  into  the  lens,  otherwise,  eye damage could result.  Be especially careful that children do not stare directly into the beam.
–  Install  the  projector  in  a  proper  position.    If  not,  it  may 
result in a fire hazard.
–  Provide  appropriate  space  on  the  top,  sides  and  rear 
o f  t h e  p r o j e c t o r  c a b i n e t  f o r  a l l o w i n g  a i r  c i r c u l a t i o n and  cooling  the  projector.    Minimum  clearance  must b e  m a i n t a i n e d .  I f  t h e  p r o j e c t o r  i s  t o  b e  b u i l t  i n t o  a c o m p a r t m e n t  o r  s i m i l a r l y  e n c l o s e d ,  t h e  m i n i m u m d i s t a n c e s  m u s t  b e  m a i n t a i n e d .    D o  n o t  c o v e r  t h e ventilation  slot  on  the  projector.    Heat  build-up  can reduce the service life of your projector, and can also be dangerous.
–  If  the  projector  is  not  to  be  used  for  an  extended  time, 
unplug the projector from the power outlet.
SIDE and TOPREAR
CAUTIONNot for use in a computer room as defined in the Standard for  the  Protection  of  Electronic  Computer/Data  Processing Equipment, ANSI/NFPA 75.
Ne  peut  être  utilisé  dans  une  salle  d’ordinateurs  telle q u e  d é f i n i e  d a n s  l a  n o r m e  A N S I / N F PA  7 5  S t a n d a r d for  Protection  of  Electronic  Computer/Data  Processing Equipment.READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE .
  CAUTION 
DO  NOT  SET THE  PROjECTOR  IN GREASy,  WET, OR  SMOKy 
CONDITIONS  SUCH  AS   IN  A KITCHEN  TO  PREVENT   A 
BREAKDOWN  OR A DISASTER .  IF  THE  PROjECT OR COMES 
IN  CONTACT  WITH OIL OR  CHEMICALS,  IT  MAy BECOME 
DETERIORATED . 
						

							
5

Safety Instructions
All  the  safety  and  operating  instructions  should  be  read before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them for  later  use.    Unplug  this  projector  from AC  power  supply before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e projector.
For  added  protection  to  the  projector  during  a  lightning storm,  or  when  it  is  left  unattended  and  unused  for  long periods  of  time,  unplug  it  from  the  wall  outlet.    This  will prevent damage due to lightning and power line surges.
Do  not  expose  this  unit  to  rain  or  use  near  water...  for example, in a wet basement, near a swimming pool, etc...
D o  n o t  u s e  a t t a c h m e n t s  n o t  r e c o m m e n d e d  b y  t h e manufacturer as they may cause hazards.
Do  not  place  this  projector  on  an  unstable  cart,  stand, or  table.    The  projector  may  fall,  causing  serious  injury to  a  child  or  adult,  and  serious  damage  to  the  projector.  U s e  o n l y  w i t h  a  c a r t  o r  s t a n d  r e c o m m e n d e d  b y  t h e manufacturer,  or  sold  with  the  projector.    Wall  or  shelf mounting  should  follow  the  manufacturer's  instructions, a n d   s h o u l d   u s e   a   m o u n t i n g   k i t   a p p r o v e d   b y   t h e manufacturers.
A n  a p p l i a n c e  a n d  c a r t  c o m b i n a t i o n s h o u l d  b e  m o v e d  w i t h  c a r e .    Q u i c k s t o p s ,  e x c e s s i v e  f o r c e ,  a n d  u n e v e n surfaces  may  cause  the  appliance  and cart combination to overturn.
Slots  and  openings  in  the  back  and  bottom  of  the  cabinet are  provided  for  ventilation,  to  ensure  reliable  operation  of the equipment and to protect it from overheating.
The  openings  should  never  be  covered  with  cloth  or  other materials,  and  the  bottom  opening  should  not  be  blocked by  placing  the  projector  on  a  bed,  sofa,  rug,  or  other similar  surface.    This  projector  should  never  be  placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.
Never  push  objects  of  any  kind  into  this  projector  through cabinet  slots  as  they  may  touch  dangerous  voltage  points or  short  out  parts  that  could  result  in  a  fire  or  electric shock.  Never spill liquid of any kind on the projector.Do  not  install  the  projector  near  the  ventilation  duct  of  air-conditioning equipment.
To the Owner
This  projector  should  be  operated  only  from  the  type  of power source indicated on the marking label.  If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do  not  overload  wall  outlets  and  extension  cords  as  this can result in fire or electric shock.  Do not allow anything to rest  on  the  power  cord.    Do  not  locate  this  projector  where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or  removing  covers  may  expose  you  to  dangerous  voltage or  other  hazards.    Refer  all  servicing  to  qualified  service personnel.
Unplug  this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:a.When the power cord or plug is damaged or frayed.b.If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d.If  the  projector  does  not  operate  normally  by  following the  operating  instructions. Adjust  only  those  controls  that are  covered  by  the  operating  instructions  as  improper adjustment  of  other  controls  may  result  in  damage  and will often require extensive work by a qualified technician to restore the projector to normal operation.e.If  the  projector  has  been  dropped  or  the  cabinet  has been damaged.
f.  W h e n  t h e  p r o j e c t o r  e x h i b i t s  a  d i s t i n c t  c h a n g e  i n 
performance-this indicates a need for service.
When  replacement  parts  are  required,  be  sure  the  service technician  has  used  replacement  parts  specified  by  the manufacturer  that  have  the  same  characteristics  as  the original  part.    Unauthorized  substitutions  may  result  in  fire, electric shock, or injury to persons.
Upon completion  of any service or repairs to this projector, a s k  t h e  s e r v i c e  t e c h n i c i a n  t o  p e r f o r m  r o u t i n e  s a f e t y checks  to  determine  that  the  projector  is  in  safe  operating condition.
NOTE FOR CUSTOMERS INTHE US
HgLAMP(S)INSIDETHISPRODUCTCONTAINMERCURYANDMUSTBERECYCLEDORDISPOSEDOFACCORDINGTOLOCAL,STATEORFEDERALLAWS. 
						

							
6

ComplianceSafety Instructions
Openings in the cabinet are provided for ventilation and to ensure  reliable  operation  of  the  product  and  to  protect  it from overheating, and these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent.  When using or  installing  the  projector,  the  following  precautions should be taken. 
– Do  not  put  any  flammable  object  or  spray  can  near 
the  projector,  hot  air  is  exhausted  from  the  ventilation holes.
–  Keep the exhaust vent at least 3' (1 m) away from any 
objects.
–  Do  not  touch  a  peripheral  part  of  the  exhaust  vent, 
especially  screws  and  metallic  part.    This  area  will become hot while the projector is being used.
–  Do not put anything on the cabinet.  Objects put on the 
cabinet  will  not  only  get  damaged  but  also  cause  fire hazard by heat.
Cooling  fans  are  provided  to  cool  down  the  projector.  The  fans’  running  speed  is  changed  according  to  the temperature inside the projector.
Air Circulation
Do  not  roll  the  projector  more t h a n  2 0  d e g r e e s  f r o m  s i d e  t o side.
Do not point the projector up to project an image.
Do not point the projector down to project an image. 
Do  not  put  the  projector  on  either  side  to project an image. 
Install  the  projector  properly.  Improper  Installation  may reduce the lamp life and cause a fire hazard.
Installing the Projector in Proper 
Position
 USE CAUTION IN CARR yING OR TRANSPORTING 
THE PROjECTOR
–  Do not drop or bump the projector, otherwise damages or malfunctions may result.
–  When  carrying  the  projector,  use  a  suitable  carrying 
case.
–  Do  not  transport  the  projector  by  using  a  courier  or 
transport  service  in  an  unsuitable  transport  case.  This may  cause  damage  to  the  projector.    To  transport  the projector through a courier or transport service, consult your dealer for their information.
–  Do  not  put  the  projector  in  a  case  before  the  projector 
is cooled enough.
Moving the Projector
When  moving  the  projector,  close  the  slide  shutter  andr e t r a c t  t h e  a d j u s t a b l e  f e e t  t o  p r e v e n t  d a m a g e  t o  t h el e n s  a n d  c a b i n e t .  W h e n  t h e  p r o j e c t o r  i s  n o t  i n  u s ef o r  a n  e x t e n d e d  p e r i o d ,  p u t  i t  i n t o  a  s u i t a b l e  c a s e  t oprotect the projector.W h e n   h a n d l i n g   t h e   p r o j e c t o r,  d o   n o t  d r o p ,  b u m p ,subject  it  to  strong  forces,  or  put  other  things  on  thecabinet.
Air Intake Vent
Exhaust Vent(Hot air exhaust)Air flow
Do  not  pitch  the  projector  more t h a n  2 0  d e g r e e s  a b o v e  a n d below. 
						

							
7

Compliance
Federal Communications Commission NoticeNote:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the foll\
owing measures:
 – Reorient or relocate the receiving  antenna.
  – Increase the separation between the equipment and receiver.
  – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  – Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpa\
rt B of Part 15 of FCC Rules.Do  not  make  any  changes  or  modifications  to  the  equipment  unless  otherwise  specified  in  the  instructions.  If  such changes or modifications should be made, you could be required to stop o\
peration of the equipment.
Model Number  : PLC-XC50 / PLC-XC55
Trade Name  : Sanyo
Responsible party  : SANYO FISHER COMPANY
Address  : 21605 Plummer Street, Chatsworth, California 91311
Telephone No.  : (818)998-7322
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:A C  P o w e r  C o r d  u s e d  i n  t h e  U n i t e d  S t a t e s  a n d  C a n a d a  i s  l i s t e d  b y  t h e  U n d e r w r i t e r s Laboratories (UL) and certified by the Canadian Standard Association (CSA).AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.GROUND
AC Power Cord Requirement
AC Power Cord for the United Kingdom:This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the  plug.    Should  the  fuse  need  to  be  replaced,  an ASTA  approved  BS  1362  fuse  must  be  used  of  the  same  rating, marked  thus ASA.  If  the  fuse  cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a  replacement  fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User In\
structions.If the plug supplied is not suitable for your socket outlet, it should b\
e cut off and destroyed.The end of the flexible cord should be suitably prepared and the correct\
 plug fitted. WARNING  :  A  PLUG  WITH  BARED  FLEXIBLE  CORD  IS  HAZARDOUS  IF  ENGAGED  IN  A  LIVE  SOCKET 
OUTLET .
The Wires in this mains lead are coloured in accordance with the followi\
ng code:
 Green-and-yellow  . . . . . .Earth
  Blue. . . . . . . . . . . . . . . . .Neutral
  Brown  . . . . . . . . . . . . . . .LiveAs  the  colours  of  the  wires  in  the  mains  lead  of  this  apparatus  may  not  correspond  with  the  coloured  markings identifying the terminals in your plug proceed as follows:The  wire  which  is  coloured  green-and-yellow  must  be  connected  to  the  terminal  in  the  plug  which  is  marked  by  the letter E or by the safety earth symbol  or coloured green or green-and-yellow.The  wire  which  is  coloured  blue  must  be  connected  to  the  terminal  which  is  marked  with  the  letter  N  or  coloured black.The wire which is coloured brown must be connected to the terminal which\
 is marked with the letter L or coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED .
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE . 
						

							
8
Part Names and FunctionsPart Names and Functions
① Air Intake Vent
② Power Cord Connector
③ Infrared Remote Receiver
④ Focus Ring (front)
⑤ Lens and Lens cover
⑥	Zoom Ring (rear)
⑦ Slide Shutter
⑧ Exhaust Vent
CAUTIONHot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.
⑨ Lamp Cover 
⑩ Speaker
⑪ Top Controls and Indicators
⑫ Terminals and Connectors
⑬ Filter Cover
⑭ Adjustable feet
	Kensington Security Slot
This  slot  is  for  a  Kensington  lock  used  to  deter theft of the projector.*Kensington  is  a  registered  trademark  of  ACCO  Brands Corporation.Security BarA  c o m m e r c i a l l y  a v a i l a b l e  a n t i - t h e f t  c h a i n  o r wire  can  be  attached  to  the  security  bar  on  the projector.
Back
⑪⑫⑩
Front
⑧⑭
Bottom
⑬
①②③④⑤⑥⑦
⑧⑨
 
						

							

Part Names and FunctionsPart Names and Functions
Rear Terminal
③  MONITOR OUT
    This terminal can be used to output the incoming      R G B  s i g n a l  f r o m  C O M P U T E R  I N  1  /  D V I - I terminal  or  COMPUTER  IN  2/COMPONENT  IN terminal to the other monitor (p.14).
① CONTROL PORT
  When  the  projector  is  controlled  by  a  computer, 
connect to this jack with serial control cable.
② COMPUTER IN  / COMPONENT IN   
  Connect  output  signal  from  a  computer,  RGB 
scart  21-pin  video  output  or  component  video output to this terminal. (pp.14,16)⑧ AUDIO IN
  Connect  the  audio  output  from  video  equipment 
c o n n e c t e d  t o ⑤  o r ⑨  t o  t h i s  j a c k .  ( W h e n 
the  audio  output  is  monaural,  connect  it  to  L (MONO) jack.). (p.15)
⑨ VIDEO IN
  Connect  the  composite  video  output  from  video 
equipment to VIDEO jack. (p.15)
⑥ AUDIO OUT (VARIABLE)
  Connect  an external  audio  amplifier  to this jack. 
(pp.14 - 16)
  This  terminal  outputs  sound  from  AUDIO  IN 
terminal (⑦ or ⑧).
⑨⑧
①②④⑤⑥③
⑦
⑤ S-VIDEO IN     
     Connect the S-VIDEO output signal from video     equipment to this jack (p.15).
④ COMPUTER IN 1 / DVI-I
     Connect computer output (Digital/Analog DVI-I     type) to this terminal (p.14).
⑦ C O M P U T E R 1 /  C O M P U T E R   C O M P O N E N T 
AUDIO IN 
  C o n n e c t  t h e  a u d i o  o u t p u t  ( s t e r e o )  f r o m  a 
computer or video equipment connected to ② or 
④ to this jack. (pp14, 16) 
						

							
10
Top Control
②	LAMP REPLACE indicator
	 Turn 	 yellow 	 when 	 the 	 life 	 of 	 the 	 projection 	 lamp 	
draws 	 to 	 an 	 end. 	 (pp.60, 	 71-72)
④	WARNING FILTER indicator
	 –	Blink 	 slow 	 when 	 the 	 filter 	 is 	 being 	 scrolled 	 . 	
(pp.57, 	 71)
	 –	B l i n k
	 f a s t 	 w h e n 	 t h e 	 f i l t e r 	 c a r t r i d g e 	 i s 	 n o t 	
installed. 	 (pp.57, 	 72)
	 –	Light
	 orange 	 when 	 the 	 clogging 	 of 	 the 	 filter 	 is 	
detected 	 or 	 the 	 filter 	 counter 	 reaches 	 a 	 time 	
set 	 in 	 the 	 timer 	 setting, 	 urging 	 immediate 	 filter/
filter
	 cartridge 	 replacement. 	 (pp.55, 	 57, 	 72)
⑪	POWER ON/STAND-BY button
	 Turn 	 the 	 projector 	 on 	 or 	 off. 	 (pp.18, 	 19)
①	POWER indicator
	 –	Light 	 red 	 when 	 the 	 projector 	 is 	 in 	 stand-by 	
mode.
	 –	Light 	 green 	 during 	 operations.
	 –	Blink
	 green 	 in 	 the 	 Power 	 management 	 mode 	 . 	
(p.50)
	 –	Blink 	 red 	 during 	 cooling 	 down.
⑧	MENU button
	 Open 	 or 	 close 	 the 	 On-Screen 	 Menu. 	 (p.20)
⑤	POINT (▲▼) buttons
	 –	S e l e c t
	
a n 	 i t e m 	 o r 	 a d j u s t 	 t h e 	 v a l u e 	 i n 	 t h e 	
On-Screen 	 Menu. 	 (p.20)
	 –	P a n
	
t h e
	
i m a g e 	 i n 	 D i g i t a l 	 z o o m 	 + 	 m o d e . 					
(p.36)
⑥	SELECT button
	 –	Execute 	 the 	 selected 	 item. 	 (p.20)
	 –	E x p a n d
	 o r 	 c o m p r e s s 	 t h e 	 i m a g e 	 i n 	 D i g i t a l 	
zoom 	 mode. 	 (p.36)
Part Names and FunctionsPart Names and FunctionsPart Names and Functions
⑦	POINT (◄►) buttons
	 –	S e l e c t
	
a n 	 i t e m 	 o r 	 a d j u s t 	 t h e 	 v a l u e 	 i n 	 t h e 	
On-Screen 	 Menu. 	 (p.20)
	 –	P a n
	
t h e
	
i m a g e 	 i n 	 D i g i t a l 	 z o o m 	 + 	 m o d e . 					
(p.36)
⑩		AUTO SETUP button
     Execute 	 the 	 setting 	 of Auto 	 setup 	 (includes 	
					
Input
	
search,
	
Auto
	
PC 	 adj. 	 and 	 Auto 	 Keystone
					
functions)
	
in
	
the
	
setting 	 menu. 		
					
(pp.22,24,28,46)
	
①②③④
⑥⑦⑧⑨⑩⑪
⑤
③	WARNING TEMP. indicator
	 E m i t 	 a 	 r e d 	 l i g h t 	 w h e n 	 t h e 	 p r o j e c t o r 	 d e t e c t s 	
an 	 abnormal 	 condition. 	 	 This 	 also 	 blinks 	 red 	
when 	 the 	 internal 	 temperature 	 of 	 the 	 projector 	
exceeds 	 the 	 operating 	 range. 	 (pp.63, 	 71-72)
⑨	INPUT button
	 Select 	 an 	 input 	 source. 	 (pp.25-26, 	 37-38)