Sanyo Vpc J4 Instruction Manual

							English108
3 Press the SET button.
hThe Index Print Screen appears.
4 Select “YES”, and press the SET button.
hThis completes the setting for the index print. You are returned to the
Print Settings Screen.
Changing the print settings
1 Follow steps 1 to 4 on pages 105
and 106.
2 Select “MODIFY PRINT SETTING”,
and press the SET button.YES:Specify an index print copy.
EXIT:Discontinue the setting pro-
cedure, and return to the
Print Setting Screen.
INDEX PRINT
SET INDEX PRINT?
YES
EXIT
DATE NO
COPIES 1ALL IMAGESDATENO
COPIESSETTINGS
1
EXIT
MODIFY PRINT SETTING
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							109English
 PRINT SETTINGS
Clearing all the print settings
Delete the print settings for all images.
1 Display the Print Settings Screen (see page 103).
2 Select “ALL CLEAR”.
3 Press the SET button.
hThe Confirm All Clear Screen appears.
4 Select “YES”, and press the SET
button.
hAll the print settings are cleared
and you are returned to the Print
Settings Screen. YES:Clear the print settings for all
images.
EXIT:Cancel the clear procedure
and return to the Print Set-
tings Screen.ALL CLEAR
CLEAR ALL SETTINGS?
YES
EXITDATEYES
COPIES 5
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English110
ADDING A VOICE MEMO (STILL IMAGES AND SEQUENTIAL SHOTS ONLY) 
You can add a voice memo to a still image or sequential shots image previ-
ously recorded.
1 Display the still image to which you want to add a voice memo.
2 Display the EXPERT Mode Playback Setting Screen (see page 36).
3 Select the add audio icon  , and
press the SET button.
hThe Add Audio Setup Screen
appears.
hIf the image already has a voice
memo recorded, the audio playback
icon   appears on the image.
SHUTTER FOR RECADD AUDIO
BACK TO MENU
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							111English
ADDING A VOICE MEMO (STILL IMAGES AND SEQUENTIAL SHOTS ONLY) 
4 Press the shutter release button.
hVoice memo recording starts when
the shutter release button is
pressed. Talk into the microphone
on the digital camera.
hA voice memo of up to about
10 seconds can be recorded.
hIf you finish recording within
10 seconds, press [o] on the arrow
button to end recording.
hWhile the voice memo is being
recorded, RECORDING and 
are displayed.
HINT
iFor still images, you can also add a voice memo immediately after captur-
ing an image (see page 92).
iAfter a voice memo has been added to an image, you cannot erase only
the voice memo. When the image is erased, the attached voice memo is
also erased.
iIf a voice memo is added to an image that already has a voice memo, the
new recording will replace the previous one.
ADD AUDIO
RECORDING
Shutter release button
Microphone
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English112
EXTRACTING A STILL IMAGE FROM A VIDEO CLIP
You can select one image (scene) from a video clip, copy it, and save it as a
still image (the original data remains unchanged).
1 Play back a video clip, and pause at the point you wish to copy and
save.
2 Display the EXPERT Mode Playback Setting Screen (see page 36).
3 Select the extract icon, and press
the SET button.
hThe screen to extract an image
appears.
4 Press the SET button.
hThe image is extracted.
hSelect “EXIT”, and press the SET button, or press the MENU button,
to return to the EXPERT Mode Playback Setting Screen.
HINT
To select a different image (frame) in step 3...
iPress [l] or [m] on the arrow button. YES:The image is copied and saved
as a still image (the original
data is left unchanged).
EXIT:The still image extraction pro-
cedure is canceled, and you
are returned to the EXPERT
Mode Playback Setting
Screen.
EXTRACT STILL
SAVE THIS IMAGE?
YES
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							113English
IMAGE INFORMATION DISPLAY (PLAYBACK INFO SCREEN)
On the Information Screen you can check what the settings were when an
image was captured.
1 Display the desired image.
2 Press the MENU button for at least 1 second.
hThe Playback Information Screen appears.
hIf the MENU button is pressed again, the Playback Information Screen
is exited.
1Resolution
2Scene select setting
3Compression rate
4Voice memo indicator
5Location of data (folder
number) and file name
6Data size
7Protect setting
8Exposure correction set-
ting
9Shutter speed
0Aperture
AFocus distance
BRemaining battery pack
charge
CDate and time of image
DPlayback time
EFrame rate setting
34
2 15
6
7
8
9
0
A
BC
INFO
32030
E3
2 15
6
D
7
8
BC
INFO


Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English114
OPTION MODE CAMERA SETTING
ABOUT THE OPTION MODE SCREEN
With the option mode, you can adjust the various settings related to camera
operation, reformat a card, and more. 
1Menu mode icon
2Monitor ON/OFF setting
3Audio recording
4Date and time setting
5Operation sound (beep) set-
tings
6Guidance settings
7Monitor brightness setting
8Display language9TV system
0Card format
APower save function
BFile number reset
CReset settings
DAudio playback
ERemaining battery charge
indication
iIcons 7 through C in the shooting mode, and icons 8 through C in the
playback mode are displayed when you press the [n] or [o] arrow button to
scroll down the screen.
1
23456
7890AB
C
E
PS
1
D4567
890ABC
E
PS
MONITOR ON/OFF AUDIO PLAYBACK
CLOCK SET
OPERATION BEEP
GUIDANCE
LCD BRIGHTNESS AUDIO REC
CLOCK SET
OPERATION BEEP
GUIDANCE
 
LCD BRIGHTNESS
LANGUAGE
TV SYSTEM
FORMAT
POWER SAVE
FILE NO. RESET
RESET SETTINGSLANGUAGE
TV SYSTEM
FORMAT
POWER SAVE
FILE NO. RESET
RESET SETTINGS
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							115English
DATE AND TIME SETTING
The digital camera will record the date and time an image or audio recording
is taken so that you can display them during playback. Therefore, before cap-
turing images, make sure the correct date and time are set. 
Example: To set the clock to 7:30 p.m. on December 23, 2004
1 Display the Option Mode Screen (see page 36). 
2 Select the clock set icon  , and
press the SET button. 
hThe CLOCK SET menu appears. 
hThe current date and time settings
appear. 
hFollow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time. 
hTo return to the Option Mode
Screen, press the MENU button, or
select “EXIT” and press the SET
button. CLOCK SET
DATE
2004/03/01
00:00
TIME
DISP
EXITYMD
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English116
3 Set the date. 
1Press the arrow button to select
“DATE”. 
2Press the SET button. 
hThe Set Date Screen appears. 
3Press the arrow button to set the
date to “2004/12/23”. 
hYe a r  s e t t i n g  → [m] → Month set-
ting → [m] → Day setting. 
hPress [n] to increase the num-
ber. 
hPress [o] to decrease the number. 
4Press the SET button. 
4 Set the clock. 
1Press the arrow button to select
“TIME”. 
2Press the SET button. 
hThe Set Time Screen appears. 
3Press the arrow button to set the
time to “19:30”. 
hHour setting → [m] → Minute
setting. 
hA 24-hour clock is used for the
time display. 
4Press the SET button. 
CLOCK SET
DATE
2004/12/23
CLOCK SET
TIME
19:30
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							117English
DATE AND TIME SETTING
5 Set the order in which the date is
displayed during playback. 
1Press the arrow button to select
“DISP”. 
2Press the SET button. 
hThe Set Date Format Screen
appears. 
3Press [n] or [o]. 
hWhen [n] is pressed, the dis-
played date order changes as
follows: 
hPress [o] to change in the reverse order. 
hIf “DISP OFF” is selected, the date the image was captured is not
shown during playback. 
4Press the SET button. 
6 Select “EXIT”, and press the SET button. 
hThe date and time setting is completed, and you are returned to the
Option Mode screen. 
NOTE 
iUnder normal conditions, while the battery pack is being replaced, an inter-
nal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost. (The backup will last for about 7
days.) It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2). Also, when the backup memory has failed
and the camera’s clock is not set, the clock alert icon   appears.
To correct the date and time settings 
iAfter steps 1 and 2, press [o] on the arrow button to select the line of the
setting that you want to change, and press [m] to select that setting. Then
press [n] or [o] to set the new setting. 
CLOCK SET
DISPYMD
year/month/day month/day/year day/month/year
DISP OFF (no display)
Downloaded From camera-usermanual.com Sanyo Manuals