Sanyo Vpc J4 Instruction Manual

							English68
PLAYBACK 
VIEWING IMAGES
1 Set the main switch to [ ].
hThe last recorded image is dis-
played on the LCD monitor.
2 Select the image you wish to view.
To display the previous image, press
the [l] arrow button.
To display the next image, press the
[m] arrow button.
3 Play back a video clip.
Follow these steps to play back a
video clip.
Normal playback
hPress the SET button.
Pause
hWhile the video clip is playing,
press the [n] arrow button. To
resume playback, press the SET
button.
Main switch
Arrow button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							69English
VIEWING IMAGES
To play back one image at a time (single-frame step)
iDuring forward playback
After pausing playback, press the [m] arrow button.
For slow playback, press and hold the [m] arrow button.
iDuring reverse playback
After pausing playback, press the [l] arrow button.
For slow reverse playback, press and hold the [l] arrow button.
To accelerate playback
i2x fast forward playback
During normal playback, press the [m] arrow button.
i20x fast forward playback
hDuring 2x playback, press the [m] arrow button.
hDuring fast forward playback, the audio is not heard.
hPress the [l] arrow button for reverse playback. The audio is not heard.
iReturn to normal playback speed
Press the SET button.
iTo cancel playback
Press the [o] arrow button.
HINT
iIf you press the shutter release button while an image is displayed, the
image number will be shown. Press the shutter release button again to turn
off the image number indication.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English70
Convenient 9-image display playback
1 Set the main switch to [ ].
2 Press [W] ([ ]) on the zoom
switch.
hThe 9-image display appears.
3 Select the image to play back.
hPress the [n], [o], [l] or [m]
arrow button to move the
orange frame to the desired
image, and press the SET but-
ton.
Instead of pressing the SET but-
ton, you can press [T] ([ ])
on the zoom switch to show the
image full screen.
 100
0001 0002 0003
0004 0006
0008 0009
0009
0005
0007
Main switch
Zoom switch
[][]
Video clip
Still imageOrange 
frame
Image number
Folder numberArrow button
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							71English
VIEWING IMAGES
Magnifying (zooming in) the image
1 Display the image that you want to magnify.
hFor a video clip, pause playback at the place you want to magnify.
2 Press [T] ([ ]) on the zoom
switch.
hMagnification is enabled.
hThe image is magnified, and the
central portion of the image is dis-
played.
hUse the arrow buttons to view differ-
ent parts of the magnified image.
To magnify:
Press [T] ([ ]) on the zoom
switch.
To return to normal size:
Press [W] ([ ]) on the zoom switch.
hThe maximum degree of magnification will depend on the resolution of
the original image.
hThe maximum magnification is about 51x at   resolution.
hIf the image has been rotated, it will be returned to its original orienta-
tion and then enlarged.
hOne scene (still image) of a paused video clip can be enlarged; how-
ever, a video clip cannot be played while enlarged.
HINT
The magnified portion of the image can be saved as a separate image.
iPress the shutter release button. The magnified portion is saved as a new
still image.
ZOOM
MOVE
ZOOM I/O
SHUTTER FOR SAVE
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English72
HINT 
To play back a voice memo (see page
92)... 
iDisplay the image, and press the SET
button. The voice memo recorded with
the image is played back. 
To adjust the volume... 
1Display the Playback Setting Screen
(see page 36). 
2Select the volume icon  , and press
the SET button. 
hThe volume control bar appears. 
3Press [l] or [m] on the arrow button to
adjust the volume. 
To view video clips on your computer 
iYou can view video clips taken with this camera on your computer using
QuickTime Ver. 3.0 or later from Apple. 
iBy using the QuickTime Plug-in included with QuickTime, you can also
play back your video clips on your Internet browser. 
iQuickTime 6.5 for Windows and Macintosh is supplied with the included
CD-ROM (Sanyo Software Pack). 
iOnline information about QuickTime can be found at 
http://www.apple.com/quicktime/. 
VOLUME
VOLUME SETTING
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							73English
ABOUT THE BASIC MODE PLAYBACK SETTING SCREEN 
Various functions are available from the playback setting screen. You can set
the protect function to prevent images from being accidentally erased, delete
all the data, and adjust the playback volume of voice memos and video clips. 
BASIC MODE Playback Setting Screen 
1Menu mode icon
2Protect (prevent accidental
erase)
3Erase icon
4Volume control
5HELP display6Remaining battery pack
charge
Not displayed when the remain-
ing battery pack charge is near
full or when the AC adaptor
(sold separately) is used.
1
2
3
45
6
PROTECT
Change image  
protect setting
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English74
VOLUME ADJUSTMENT 
The playback volume for voice memos recorded with still images and sequen-
tial shots and for video clips can be adjusted. 
1 Play back an image. 
2 Display the Playback Setting Screen (see page 36). 
3 Select the volume icon  , and press the SET button. 
hThe volume control bar appears. 
4 Press [l] or [m] on the arrow button
to adjust the volume. VOLUME
VOLUME SETTING
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							75English
IMAGE PROTECT MODE (PREVENT ACCIDENTAL ERASURE) 
By using the image protect mode, you can prevent accidental erasure or over-
writing of the important data that you want to keep. The protect mode can be
applied to a still image, to single images of a sequential shots sequence, to a
video clip, or to an audio recording. 
1 Display the data that you want to protect. 
2 Display the Playback Setting Screen (see page 36). 
3 Select the protect icon  . 
4 Press the SET button. 
h“LOCK?” appears. 
hIf the protect mode has already
been enabled for the data, then
“UNLOCK?” appears. 
5 Select “YES”, and press the SET
button. 
hThe protect mode is set for the
data. 
hThe protect mark   indicates
that the data is locked. 
YES
EXIT PROTECT
LOCK?
YES
EXIT PROTECT
UNLOCK?
Protect mark 
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English76
CAUTION 
iEven if the protect mode is set for certain data files, they will be erased if
the card is reformatted (see page 134). 
HINT 
To select a different image in steps 4 and 5... 
iPress [l] or [m]. 
To cancel the protect mode for an image... 
iDisplay the desired data and repeat steps 2 to 5. The protect mark will dis-
appear and the protect mode is canceled. 
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							77English
ERASING DATA 
Images, video clips, and sound recordings can be erased one at a time, or all
at once.
1 Display the data that you want to erase. 
2 Display the Playback Setting Screen
 (see page 36). 
3 Select the erase icon   and press
the SET button. 
hThe Erase Screen appears. 
For still images/sequential shots: 
ONE ERASE:Erases one still image
at a time. 
ERASE ALL:Erases all the images. 
For video clips: 
ONE ERASE:Erases the video clip
displayed. 
ERASE ALL:Erases all the images. 
For audio recordings: 
ONE ERASE:Erases one audio
recording at a time. 
ERASE ALL:Erases all the audio
recordings. 
hSelect “EXIT”, and press the SET
button, to return to the Playback
Setting Screen.ERASE
ONE ERASE
ERASE ALL
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals