Sharp AR 5320D User Manual

MODEL
AR-5316
AR-5320
AR-5316 X
AR-5320 X
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
•BEFORE USING 
   THE MACHINE
•COPY FUNCTIONS
•PRINTER FUNCTIONS
•USER SETTINGS
•TROUBLESHOOTING
•ROUTINE MAINTENANCE
•PERIPHERAL DEVICES 
   AND SUPPLIES
•APPENDIX 8
18
29
31
40
55
58
60
Page
AR-5316/AR-5316 X
AR-5320/AR-5320 X
 
HINAKS➀QSZZ
AR-5316-5320-EX.book  1 ページ  ２００３年１１月２６日　水曜日　午後５時３分
Downloaded From ManualsPrinter.com Manuals 

The CE mark logo label is affixed on an equipment in case that the directives described in the
above sentence are applicable to the product. (This sentence is not applicable in any country
where the above directives are not required.)
Warning
This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures.
In some areas, the POWER switch positions are marked I and     on the copier 
instead of ON and OFF.
If...

1
CONTENTS
CAUTIONS ................................................................................................................................................. 3
CAUTIONS ON USING..................................................................................................................................... 3
IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ........................................................... 3
CAUTIONS ON HANDLING...

2
6ROUTINE MAINTENANCE
CHECKING THE TOTAL OUTPUT COUNT 
AND TONER LEVEL........................................ 55
CHECKING THE TOTAL OUTPUT COUNT...55
CHECKING THE TONER LEVEL ...................56
ROUTINE MAINTENANCE .............................. 56
CLEANING THE DOCUMENT GLASS AND
SPF/DOCUMENT COVER .............................56
CLEANING THE BYPASS TRAY PAPER 
FEED ROLLER ...............................................57
CLEANING THE TRANSFER CHARGER ......57
7PERIPHERAL DEVICES AND SUPPLIES...

3
CAUTIONS
Follow the cautions below when using this machine.
CAUTIONS ON USING
Warning:
 The fusing area is hot. Exercise care in this area when removing misfed paper.
 Do not look directly at the light source. Doing so may damage your eyes.
Caution:
 Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it 
back on.
 Machine power must be turned off before installing any supplies.
 Place the machine on a firm, level surface.
 Do not...

4
The machine should be installed near an accessible power outlet for easy connection and 
disconnection.
Be sure to connect the power cord only to a power outlet that meets the specified voltage and 
current requirements. Also make certain the outlet is properly grounded.
Be sure to allow the required space around the machine 
for servicing and proper ventilation.
CAUTIONS ON HANDLING
Be careful in handling the machine as follows to maintain the performance of this machine. 
Do not drop the machine,...

5
USING THE MANUAL
This machine has been designed to provide convenient copying features in a minimum amount of office space and 
with maximum operational ease. To get full use of all machine features, be sure to familiarise yourself with this 
manual and the machine. For quick reference during machine use, keep this manual in a handy location.
ABOUT THE OPERATION MANUALS
The operation manuals for the machine are as follows:
Operation Manual (Digital Multifunctional System) (this manual)
This manual...

6
DIFFERENCES BETWEEN MODELS
This manual covers the following models.
AB series (metric) and inch series references
Both specifications are quoted where applicable.
For example:
Page 15, step 1 .................... B4 and A3 (8-1/2 x 14 and 11 x 17)
Page 60 ................................50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 
200%  (50%, 64%, 77%, 95%, 100%, 121%, 129%, 
141%, 200%)
Although AB series size indications are shown on the operation panel of this manual, inch series indications are...

7
MAIN FEATURES
High-speed laser copying
First-copy time*1 at 300 dpi*2 is only 7.2 seconds .
Copying speed is 20/16 copies per minute. This is ideal for business use and provides a big boost to workplace 
productivity.
*1First-Copy time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
*2dpi (dots per inch) is unit that is used to measure resolution. Resolution indicates how much detail can be reproduced in 
a printed or scanned image.
High-quality...

8
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Document feeder cover (when the SPF is installed) 
/document cover
Open to make copies from the document glass. 
(p.18)
Document glass
Place an original that you wish to scan face down 
here. (p.18)
Handles
Use to move the machine.
Power switch
Press to turn the machine power on and off. (p.12)
Operation panel
Contains operation keys and indicator lights....