Sharp Ar M201 Manual

Page
PREPARATIONS
LOADING PAPER
MAKING COPIES
INSTALLING THE 
SOFTWARE
PRINTER/SCANNER 
FUNCTIONS
USER SETTINGS
TROUBLESHOOTING AND 
MAINTENANCE9
15
 20
36
49
54
61
80
82
CONVENIENT COPY 
FUNCTIONS
 26
OPTIONAL EQUIPMENT
APPENDIX
DIGITAL MULTIFUNCTIONAL
SYSTEM
AR-M201
MODEL
OPERATION MANUAL
(for general information)
ED IN CHINA2008F KS2TINSE1869QSZZ
!AR-M201.book  1 ページ  ２００８年５月２２日　木曜日　午後１時４１分 

Each instruction also covers the optional units used with this product.
Shielded interface cables must be used with this equipment to maintain 
compliance with EMC regulations.
Do not make copies of anything which is prohibited from copying by law. The 
following items are normally prohibited from copying by national law. Other 
items may be prohibited by local law.
Money Stamps  Bonds Stocks  Bank drafts
Checks Passports Drivers licences
In some areas, the POWER switch positions are marked I and     on...

1
CAUTIONS ................................................................................................................ 3
SOFTWARE LICENSE .............................................................................................. 4
ENVIRONMENTAL INFORMATION .......................................................................... 5
INTRODUCTION ....................................................................................................... 6
MAIN FEATURES...

2
6PRINTER/SCANNER FUNCTIONS
USING THE PRINTER MODE ........................................................................ 50
BASIC PROCEDURE FOR PRINTING ........................................................... 50
USING THE SCANNER MODE....................................................................... 51
SCANNING USING THE KEYS ON THE MACHINE ...................................... 51
SCANNING FROM YOUR COMPUTER ......................................................... 52
OPERATION IN COPY,...

3 CAUTIONS
Caution label on the machine
The label ( ) in the fusing area of the machine indicates the following:
: Caution, risk of danger
: Caution, hot surface
Cautions on using the machine
Follow the cautions below when using this machine.
Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper.
 Do not look directly at the light source. Doing so may damage your eyes.
Caution:
 Place the machine on a firm, level surface.
 Do not install the machine in a humid or dusty...

4
Cautions on handling the machine
Be careful in handling the machine as follows to maintain the performance of this 
machine. 
Do not drop the machine, subject it to shock or strike it against any object.
Store spare toner cartridges in a cool dry place without removing from the
package before use.
 If they are exposed to direct sunlight or excessive heat, poor copies may result.
Do not touch the photoconductive drum (green portion).
 Scratches or smudges on the drum will cause dirty copies.
Trademark...

5 ENVIRONMENTAL INFORMATION
The products that meet the ENERGY STAR® guidelines carry the logo shown above.
The products without the logo may not meet the ENERGY STAR® guidelines. Products that have earned the ENERGY STAR
® are designed to 
protect the environment through superior energy efficiency.
A small amount of ozone is produced within the unit during operation. The 
emission level is insufficient to cause any health hazard.
Note:
The present recommended long term exposure limit for ozone is 0.1ppm...

6
INTRODUCTION
Using the manual
This machine has been designed to provide convenient copying features in a 
minimum amount of office space and with maximum operational ease. To get full use 
of all machine features, be sure to familiarize yourself with this manual and the 
machine. For quick reference during machine use, keep this manual in a handy 
location.
About the operation manuals
The operation manuals for the machine are as follows:
Operation Manual (this manual)
Explains the machine and how to...

7 MAIN FEATURES
High-speed laser copying
First-copy time*1 is only 8.0*2 seconds.
Copying speed is 20 copies per minute. This is ideal for business use and provides a 
big boost to workplace productivity.
*1The first-copy time is measured after the power save indicator turns off following 
power on, using the document glass with the polygon rotating in the copy ready state 
and LSU SETTING set to ON in the user programs (A4 (8-1/2 x 11), paper fed 
from paper tray).
*2When user program 24 is set to OFF....

8
LCD panel displays messages
 The LCD panel displays messages that show function settings and the status of 
the machine.
Laser printer function
 The accompanying printer driver can be installed to enable use of the machine as 
a printer. 
Colour scanner function
 The accompanying scanner driver can be installed and the machine connected to 
a computer using a USB cable to enable use as a scanner. 
Fax function (option)
 The optional Facsimile Expansion Kit can be installed to enable the machine to be...