Sharp Ar M201 Manual

19
2
CHANGING A TRAYS PAPER SIZE SETTING
Follow these steps to change a trays paper size setting.
1Press the [MENU] key.  
Press the [ ] key ( ) or [ ] key ( ) until PAPER SIZE 
appears, and then press the [ENTER] key.
2Press the [ ] key ( ) or [ ] key ( ) to 
select the tray, and then press the 
[ENTER] key.
3Press the [ ] key ( ) or [ ] key ( ) to 
select the paper size, and then press the 
[ENTER] key.
The paper size changes as follows each time the
[ ] key ( ) or [ ] key ( ) is pressed:
A4→B5 →A5...

20
3
Chapter 3
This chapter explains basic copying functions. 
NORMAL COPYING
Using the document glass
1Open the original cover/RSPF, and place the original face down 
on the document glass.
[How to place the original]
Align the original with the original scale and the 
centring ( ) mark.
2 Gently close the original cover/RSPF.
By factory default, when a copy is made with 
the original cover/RSPF cover open, the 
function for preventing excessive toner use 
activates and CHECK ORIGINAL appears 
in the...

MAKING COPIES
21
3
Setting a large original
The original cover can be removed to allow copying of bulky objects.
1Simply lift the original cover straight
up.
2To reattach the original cover, reverse the above procedure.
Using the RSPF (Option)
1Make sure that an original has not been left on the document 
glass.
2Adjust the original guides to the size 
of the originals.
3Place the original(s) face up in the 
document feeder tray without trying 
to force them in.
The RSPF indicator on the operation panel...

MAKING COPIES
22
Originals that cannot be used in the RSPF
The following originals cannot be used. These may cause misfeeds or smudging and 
unclear images.
 Transparencies, tracing paper, other transparent or translucent paper, and 
photographs.
 Carbon paper, thermal paper.
 Originals that are creased, folded, or torn.
 Glued originals, cut-out originals.
 Originals with binder holes.
 Originals printed using an ink ribbon (thermal transfer printing), originals on 
thermal transfer paper.
Original...

MAKING COPIES
23
3
Setting the number of copies
Press the numeric keys to set the number of copies.
The set number of copies appears in the display. A maximum of 99 copies can be set.
If you wish to make only a single copy, copying is possible with the display 
showing 0.
SELECTING THE TRAY
Press the [TRAY SELECT] key ( ).
Each time, you press the [TRAY SELECT] key ( ), 
the location indicated by the tray location indicator 
changes in the following order : paper tray→lower 
paper tray (when the...

24
MAKING A COPY DARKER OR LIGHTER
Automatic exposure adjustment is initially enabled. This function automatically 
adjusts the copy image according to the original being copied. If you wish to select 
the exposure level yourself, follow the steps below. (Select from 2 original types and 
5 exposure levels for each original type.) The exposure level used in automatic 
exposure adjustment can also be changed with AE LEVEL ADJUST in the user 
programs (p.57).
Original types
●AUTO ...... Automatic exposure...

25
3
REDUCTION/ENLARGEMENT/ZOOM
Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is 
being used, the zoom copy ratio range is 50% to 200%.) The [COPY RATIO] key can 
be pressed to quickly select a ratio from among eight preset ratios. In addition, the 
[ ] key ( ) and [ ] key ( ) can be pressed to select the ratio in increments of 
1%.
1Place the original(s) and check the paper size.
2Press the [COPY RATIO] key.
3Press the [COPY RATIO] key and/or [ ] key ( ) or [ ] key  
( ) to...

26
4
Chapter 4
AUTOMATIC TWO-SIDED COPYING
Two originals can be automatically copied onto both sides of a single sheet of paper. 
When the RSPF is used, two-sided copies of two-sided originals can easily be made.
When performing automatic two-sided copying of one-sided originals, the orientation 
of the copied image can be selected according to the binding position of the paper.
SHORT EDGE: Select when binding the paper at the short edge.
LONG EDGE: Select when binding the paper at the long edge....

CONVENIENT COPY FUNCTIONS
27
4
Using the document glass
1Place the original that you wish to copy onto the front side of 
the paper on the document glass and close the original cover/
RSPF.
2Press the [2-SIDED COPY] key until 1 TO 
2 appears, and then press the [ENTER] 
key.
3Press the [ ] key ( ) or [ ] key ( ) to 
select the binding edge and then press the 
[ENTER] key.
Select LONG EDGE or SHORT EDGE.
The LONG EDGE and SHORT EDGE are 
shown in the illustration on the preceding page.
4Select the number...

CONVENIENT COPY FUNCTIONS
28
Using the RSPF (Option)
1Place the original(s) in the RSPF. (p.21) 
If you place an odd number of originals for one-sided to two-sided copying, 
the last page will be one-sided.
2Press the [2-SIDED COPY] key and select 
the two-sided copy mode that you wish to 
use.
The mode changes as follows each time you press 
the [2-SIDED COPY] key: 
1 TO 1 → 1 TO 2 → 2 TO 2 → 2 TO 1
 1 TO 2: Two-sided copies from one-sided originals
 2 TO 2: Two-sided copies from two-sided originals
 2...