Sharp AR M205 User Manual

39
4
USING THE PRINTER MODE
The procedure for loading paper is the same as for loading copy paper. See LOADING PAPER. (p.13)
BASIC PROCEDURE FOR PRINTING
The basic procedure for printing is explained in the following. To use convenient printer functions, see the Online 
Manual or the printer driver help file.
1Make sure that paper is loaded in the 
tray.
The procedure for loading paper is the same as for 
copying. See LOADING PAPER (p.13) and make 
sure the paper that you wish to use is loaded.
2Make...

40
USING THE SCANNER MODE
The procedure for placing the original is the same as for copying. See NORMAL COPYING. (p.18)
SCANNING USING THE KEYS ON THE MACHINE
The procedure for scanning using the [SCAN] key and [SCAN MENU] keys is explained in the following. When 
scanning is performed by this method, the application that has been set in Button Manager will automatically start 
and the scanned image will be pasted into the application.
1Press the [SCAN] key.
When the SCAN 
indicator lights up, the...

41
PRINTER/SCANNER FUNCTIONS
4
[SCAN MENU] keys and the Button Manager scan menu
The six [SCAN MENU] keys can be configured separately in Button Manager for the computer connected to the USB 
1.1 port and the computer connected to the USB 2.0 port.
The factory default settings for the [SCAN MENU] keys and Button Manager are as follows. For information on 
Button Manager settings, see the Button Manager help file.
SCANNING FROM YOUR COMPUTER
The machine supports the TWAIN standard, making it possible to...

42
5
Chapter 5
USER SETTINGS
This chapter explains how to set the automatic exposure level, toner save mode, and the user programs, which are 
custom settings that control fine points of the machine’s operation.
ADJUSTING THE AUTOMATIC 
EXPOSURE LEVEL
The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure 
according to the original, can be adjusted. If copies tend to be too dark or too light when automatic exposure 
adjustment is used, follow the steps...

43
5
ENABLING TONER SAVE MODE
Toner save mode can be enabled to reduce toner consumption by about 10%.
1Press the [AUTO/TEXT/PHOTO] key to 
select TEXT.
2Hold down the [AUTO/TEXT/PHOTO] 
key until the PHOTO indicator blinks.
The exposure level 
indicators show the 
current setting.
3To enable toner save mode, press the 
[Light] key ( ). To disable toner save 
mode, press the [Dark] key ( ).
When enabling toner 
save mode, make sure 
the 1 light blinks.
When disabling toner 
save mode, make sure 
the 5...

44
CUSTOMIZING SETTINGS
(User programs)
The user programs allow you to customize the machine to match your needs.
USER PROGRAMS
Program 
numberProgram name
Setting codes
(factory default setting 
appears in bold)
Explanation
1Auto clear time1: OFF
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec. Auto clear time automatically returns the copy 
settings to the initial settings (p.12) when a 
certain period of time elapses after a copy is 
made. This program is used to select the period 
of time....

45
USER SETTINGS
5
7Rotation copy*20: OFF
1: ON When the auto paper select function is enabled 
and there is no paper that is the same size as 
the original and loaded in the same orientation, 
this function will automatically select paper of 
the same size that is loaded in the opposite 
orientation, and rotate the image 90 degrees so 
that it is copied on the paper in the correct 
orientation.
 When the auto ratio select function is operating 
and the original and paper are loaded in 
opposite...

46
USER SETTINGS
24Memory allocated to 
printer mode1: 30%
2: 40%
3: 50%
4: 60%
5: 70% Use this to change the proportion of machine 
memory used for printer mode.
25Key auto repeat0: OFF
1: ON Use this setting to select whether or not holding 
down a key causes repeated input of the key. 
For keys that normally cause a set value to 
increase when held down (for example, holding 
down the [ZOOM] key (
, )), this program 
can be used to have the set value not change 
when the key is held down.
26Key...

47
USER SETTINGS
5
SELECTING A SETTING FOR A USER PROGRAM
1Hold down the [Light] key ( ) until 
the alarm indicators ( ,  ,  ,  , 
) blink.
The display shows - - 
with the left hyphen 
blinking.
2Enter the program number with the 
numeric keys.
 See USER 
PROGRAMS (p.44 to 
p.46) for the program 
numbers.
 The selected program 
number blinks.
 To select Auto clear 
timer, press the [1] 
key.
3Press the [START] key ( ).
 The selected program 
number stops blinking 
and lights steadily.
 The currently...

48
SETTINGS FOR AUDITING MODE
AUDITING MODE
When Auditing mode is enabled, a count is kept of the number of copies made by each account (up to 20 accounts 
can be established), and the counts can be displayed and totaled as necessary. In Auditing mode, the display 
shows - - -, and this indicates that a 3-digit account number must be entered in order to use the machine for 
copying.
 
AUDITING MODE SETTINGS
The administrator of the machine should complete the following settings:
 Enable Auditing mode...