Sharp Mx 3501 N Manual

25
TRANSMISSION BY REDIALING (RESEND)
The destinations of the most recent 8 transmissions by fax, Scan to E-mail, and/or Internet fax are stored. One of these 
can be selected to resend to that destination. 
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
2
Touch the [Resend] key.
3
Touch the key of the fax destination that 
you wish to redial.
The last 8 transmission destinations appear.
4
Press the [BLACK & WHITE START] key 
()....

26
TRANSMISSION USING THE SPEAKER
When the speaker is used to dial, the fax is sent after the number is dialed and the connection is made. If a person 
answers, you will be able to hear his or her voice, but you will not be able to speak.
1
Place the original.
Place the original face up in the document feeder tray, or face 
down on the document glass.
When the document glass is used, only one page can be 
transmitted.
2
Touch the [Speaker] key.
You will hear the dial tone through the machines speaker....

27
 When the speaker is used, transmission takes place without scanning the original into memory.
 A destination that includes an F-code (sub-address and passcode) cannot be used.
 A one-touch key that has multiple destinations or has a non-fax destination cannot be used.
System Settings for Fax  (Administrator): Speaker Settings (page 178)
The default volume level of Speaker can be changed in the Speaker Settings. 

28
CHANGING THE RESOLUTION AND EXPOSURE
CHANGING THE RESOLUTION
The resolution can be selected to match the characteristics of the original, such as text or photo, the size of the text, and 
the darkness of the image.
Resolution settings
1
Display the resolution settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Resolution] key.
The currently configured resolution setting appears at the 
top of the [Resolution] key
2
Select the resolution.
(1) Touch the key of the desired resolution.
(2)...

29
CHANGING THE EXPOSURE
The exposure can be changed to match the darkness of the original.
Exposure settings
1
Display the exposure settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Exposure] key.
The currently configured exposure setting appears at the 
top of the [Exposure] key
2
Select the exposure.
(1) Touch the [Manual] key.
(2) Adjust the exposure with the   keys.
The exposure darkens when the   key is touched, 
and lightens when the   key is touched.
To return to auto contrast...

30
SPECIFYING THE ORIGINAL SCAN SIZE 
AND SEND SIZE (Enlarge/Reduce Sending)
When the original is placed, its size is automatically detected and displayed in the base screen.
When an 8-1/2 x 11 (A4) original is placed, 8-1/2 x 11 is displayed as the Scan size and Auto is displayed as the 
Send size.
For example, if an 8-1/2 x 11 (A4) size original is placed and the send size is set to 5-1/2 x 8-1/2 (B5), the image will 
be reduced before transmission.
 Only standard original sizes can be automatically...

31
SPECIFYING THE SCAN SIZE OF THE ORIGINAL
Specifying the size using paper sizes
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The current status appears at the top of the [Original] key
2
Touch the [Scan Size] key.
To specify the image orientation...
Touch the appropriate image orientation key so that it is highlighted.
3
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
 If you are sending a long...

32
Specifying the size with numbers
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The current status appears at the top of the [Original] key
2
Touch the [Scan Size] key.
To specify the image orientation...
Touch the appropriate image orientation key so that it is highlighted.
3
Touch the [Size Input] tab.
4
Enter the scan size.
(1) Touch the [X] key and enter the X 
(horizontal) dimension with the   
keys.
(2) Touch the [Y] key and enter the Y...

33
SPECIFYING THE SEND SIZE
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smaller than the scan size is selected, the image will be reduced. The enlargement/reduction ratio that is set 
using this procedure will be automatically cleared after the transmission is completed.
The send size cannot be specified when the scan size is [Long Size] or is specified by numbers.
1
Display the original settings screen.
(1)...

34
AUTOMATICALLY SCANNING BOTH SIDES 
OF AN ORIGINAL (2-sided original)
This function is convenient when you wish to fax both sides of a document. The automatic document feeder will 
automatically scan both sides of the document.
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
2
Select the 2-sided original setting.
(1) Touch the [2-Sided Booklet] key or the 
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
(2) Touch the...