Sharp Ux355l Plain Paper Fax Machine Operation Manual

							Clearing Paper Jams
139
11. Trouble-
shooting
2Open the operation panel (grasp the 
finger hold and pull up), and then pull 
the release on the right side of the 
machine forward to open the print 
compartment cover.
3Gently pull the jammed paper out of 
the machine, making sure no torn 
pieces of paper remain in the print 
compartment or rollers. Clearing jammed printing paper
1Pull the paper release plate forward 
and remove the paper.
all.book  Page 139  Wednesday, April 26, 2000  7:08 PM 
						

							Clearing Paper Jams
140
5Reinsert the paper in the paper tray 
and push the paper release plate back 
down.
4Close the print compartment cover 
(press down on both sides to make 
sure it clicks into place), and then 
close the operation panel.
all.book  Page 140  Wednesday, April 26, 2000  7:08 PM 
						

							Ordering Parts
141
Ordering Parts
To order parts, contact the parts distribution center located nearest you. 
When ordering a part, use the part order number shown below. 
Operation manual   TINSE4132XHZZ  
Rapid Key labels   TLABH481AXHZZ 
Handset cord  QCNW-289ASCOW
Telephone line cord  QCNW-290ASCZZ 
Handset DUNTK464BXHLW 
Original document support  PHOP-2102XHZZ 
Imaging film cartridge  CPLTP3002XHB1 
Gears NGERH2455XHZZ (large gear)
NGERH2456XHZZ 
Part distribution centers 
Panson Electronics
 I-80 and New Maple Ave. 
Pine Brook, NJ 07058 Tel: 1-800-255-5229 
Fax: 1-800-332-3922
Tritronics, Inc. 
1306 Continental Drive 
Abingdon, MD 21009Tel: 1-800-638-3328 
Fax: 1-800-888-FAXD 
Tritronics, Inc. 
1015 NW 52nd Street 
Ft. Lauderdale, FL 33309Tel:1-800-365-8030 
Fax: 1-800-999-FAXD
Fox International, Ltd. 
23600 Aurora Road 
Bedford Heights, OH 44146Tel: 1-800-321-6993 
Fax: 1-800-445-7991
Andrews Electronics 
25158 Avenue Stanford 
Santa Clarita, CA 91355Tel: 1-800-274-4666 
Fax: 1-805-295-5126
Sharp Accessories and 
Supply Center 
2130 Townline Road 
Peoria, IL 61615Tel: 1-800-642-2122
all.book  Page 141  Wednesday, April 26, 2000  7:08 PM 
						

							FCC Regulatory Information
142
FCC Regulatory Information
This equipment complies with FCC rules, Part 68. On this equipment is a label 
that contains, among other information, the FCC Registration Number and 
Ringer Equivalence Number (REN) for this equipment. If requested, this 
information must be provided to your telephone company. 
An FCC compliant telephone cord and modular plug is provided with this 
equipment. This equipment is designed to be connected to the telephone network 
or premises wiring using a compatible modular jack which is Part 68 compliant. 
This equipment connects to the telephone network through a standard USOC RJ-
11C network interface jack. 
The REN is used to determine the quantity of devices which may be connected to 
your telephone line and still have all of those devices ring when your number is 
called. Too many devices on one line may result in the devices not ringing in 
response to an incoming call. In most, but not all, areas as the sum of the RENs of 
all devices should not exceed five (5.0). To be certain of the number of devices 
that may be connected to your line, as determined by the total REN, contact your 
local telephone company. 
If this equipment causes harm to the telephone network, your telephone company 
may disconnect your service temporarily. If possible, they will notify you in 
advance. If advance notice is not practical, you will be notified as soon as 
possible. You will also be advised of your right to file a complaint with the FCC. 
Your telephone company may make changes in its facilities, equipment, 
operations, or procedures that could affect the operation of your equipment. If 
this happens, the telephone company will provide advance notice in order for you 
to make necessary modifications to maintain uninterrupted service. If the 
equipment is causing harm to the telephone network, your telephone company 
may ask you to disconnect the equipment until the problem resolved. 
If you have any questions or problems which cannot be solved by reading this 
manual, please contact Sharp’s Customer Assistance Center. The number is 1-
800-BE SHARP.
This equipment may not be used on coin service provided by the telephone 
company. Connection to party lines is subject to state tariffs. Contact your state’s 
public utility commission, public service commission, or corporation 
commission for more information. 
This equipment is hearing-aid compatible. 
When programming and/or making test calls to emergency numbers: 
♦Remain on the line and briefly explain to the dispatcher the reason for the call. 
♦Perform such activities in the off-peak hours, such as early morning or late 
evening. 
all.book  Page 142  Wednesday, April 26, 2000  7:08 PM 
						

							143
1. Installation 
and setup
Quick Reference Guide
Entering Your Name and 
Number
1. Press:
Display shows:
2. Press:
3. Enter your fax number (max. of 20 digits) 
by pressing the number keys. 
•To inser t  a space between digits, press 
the # key.
•If you make a mistake, press the SPEED 
DIAL key to backspace and clear the mis-
take.
4. Press:
5. Enter your name by pressing the appro-
priate number keys as shown below. 
•To enter two letters in succession that 
require the same key, press the 
SPEAKER key after entering the first let-
ter.
Setting the Date and Time
1. Press:
Display shows:
2. Press:
3. Enter two digits for the month (01 to 12).
4. Enter two digits for the day (01 to 31).
5. Enter four digits for the year (Ex: 2000)
6. Enter two digits for the hour (01 to 12) 
and two digits for the minute (00 to 59).
7. Press * for A.M. or # for P.M.
8. When finished, press:
Storing and Clearing Auto 
Dial Numbers
1. Press:
Display shows:
2. Press 1 to store a number or 2 to clear a 
number.
3. Enter a 2-digit Speed Dial number (from 
01 to 07 for Rapid Key Dialing, or 08 to 47 
for Speed Dialing). (If you are clearing a 
number, go to Step 7.)
4. Enter the full fax/telephone number.
5. Press:
6. Enter the name of the location by press-
ing number keys. (Refer to the letter entry 
table in Entering Your Name and Num-
ber.) 
7. Press:
3
OWN NUMBER SET
A =B =
C =
D =E =F =G =H =I =
J =K =
L =M =N =O =P =Q =R =S =
T =U =V =W =X =Y =Z =
SPACE =
•To change case, press the REDIAL key. 
Press # or * to scroll through symbols 
and special characters.
6. When finished, press:
3
DATE  &  T IM E SE T
3
FAX/TEL # MODE
FUNCTION
FUNCTION
FUNCTION
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
STOP
STOP
STOP
all.book  Page 143  Wednesday, April 26, 2000  7:08 PM 
						

							Quick Reference Guide
144
Sending Faxes
Place your document 
(up to 10 pages) face 
down in the document 
feeder.
Normal Dialing 
1. Lift the handset or press 
2. Dial the fax number. 
3. Wait for the reception tone (if a person 
answers, ask them to press their Start 
key). 
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. 
Transmission will begin automatically.
Speed Dialing  
1. Press: 
2. Enter the 2-digit Speed Dial number. 
3. Press:
SPEAKER
SPEED
DIAL
Receiving Faxes
Press the RECEPTION MODE key until the 
arrow in the display points to the desired 
reception mode.
FAX mode: The fax machine automatically 
answers on four rings and receives the 
incoming document.
TEL mode: 
Beep
RECEIVING
A.M. mode: Select this mode when an 
answering machine is connected to the fax 
and the answering machine is turned on.
START/MEMORY
START/MEMORY
START/MEMORY
FAX
TEL
A.M.
FAX
TEL
A.M.
FAX
TEL
A.M.
JUN   01  10:30
JUN   01  10:30
JUN   01  10:30RECEPTION 
          MODE
all.book  Page 144  Wednesday, April 26, 2000  7:08 PM 
						

							145
Guía de referencia rápida
Introducción de su nombre y 
número
1. Pulse:
El visor muestra:
2. Pulse:
3. Introduzca su número de telefax (20 dígitos 
como máx.) mediante pulsación de las 
teclas numéricas. 
•Pulse la tecla # para introducir un espacio 
libre.
•Si cometiera un error, pulse la tecla SPEED 
DIAL (marcación rápida) para volver un 
puesto y corregirlo.
4. Pulse:
5. Introduzca su nombre mediante pulsación 
de las teclas numéricas adecuadas como se 
muestra a continuación. 
•Para introducir dos letras sucesivas que 
requieran el mismo código, pulse la tecla 
SPEAKER (altavoz) después de introducir la 
primera letra.
Ajuste de la fecha y hora
1. Pulse:
El visor muestra:
2. Pulse:
3. Introduzca dos dígitos para el mes 
(01 hasta 12). 
4. Introduzca dos dígitos para el día 
(01 hasta 31). 
5. Introduzca cuatro dígitos para el año 
(Ej.: 2000). 
6. Introduzca dos dígitos para la hora 
(01 hasta 12) y dos dígitos para los minutos 
(00 hasta 59).
7. Pulse * para A.M. o # para P.M.
8. Una vez finalizado pulse: 
Memorización y borrado de 
números de marcación 
automática
1. Pulse:
El visor muestra:
2. Pulse 1 para guardar un número ó 2 para 
borrarlo.
3. Introduzca un número de marcación abrevi-
ada de dos dígitos (desde 01 hasta 07 para 
marcación rápida o desde 08 hasta 47 para 
marcación abreviada). (Vaya al paso 7 si 
está borrando un número)
4. Introduzca el número de telefax/teléfono 
completo.
5. Pulse:
6. Introduzca el número del puesto mediante 
pulsación de las teclas numéricas. (Con-
sulte la tabla para introducción de letras en 
la Introducción de su nombre y número).
7. Pulse:
3
OWN NUMBER SET
A =B =
C =
D =E =F =G =H =I =
J =K =
L =M =N =O =P =Q =R =S =
T =U =V =W =X =Y =Z =
SPACE =
•Para cambiar de mayúscula a minúscula y 
viceversa, pulse la tecla REDIAL (repetición 
de llamada). Pulse la tecla # o * para hojear 
por los símbolos y caracteres especiales.
6. Una vez finalizado pulse:
FUNCTION3
DATE & TIME SET
FUNCTION3
FAX/TEL # MODE
FUNCTION
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
STOP
START/MEMORY
START/MEMORYSTART/MEMORY
STOPSTOP
all.book  Page 145  Wednesday, April 26, 2000  7:08 PM 
						

							Guía de referencia rápida
146
Transmisión de mensajes telefax
Coloque el original 
(hasta 10 páginas) cara 
abajo en el alimentador 
de documentos.
Marcación normal 
1. Levante el auricular o pulse: 
2. Marque el número de telefax.
3. Espere hasta escuchar el tono de recepción 
(si contestara una persona, pídale pulsar su 
tecla Start). 
4. Pulse:
Marcación rápida
Pulse la tecla de marcación rápida adecuada.
La transmisión se inicia automáticamente.
Marcación abreviada  
1. Pulse: 
2. Introduzca el número de dos dígitos de mar-
cación abreviada. 
3. Pulse:
SPEAKER
SPEED
DIAL
Recepción de mensajes telefax
Pulse la tecla RESOLUTION/RECEPCTION 
MODE (Resolución/Modo de recepción) hasta 
que la flecha en el visor señale el modo de 
recepción deseado (asegúrese de que el ali-
mentador de originales está vacío).
Modo FAX: El aparato telefax contesta 
automáticamente tras cuatro llamadas del tim-
bre y recibe el documento entrante.
Modo TEL: 
Beep
RECEIVING
START/MEMORY
START/MEMORY
RESOLUTION
FAX
TEL
A.M.
FAX
TEL
A.M.
FAX
TEL
A.M.
JUN   01  10:30
JUN   01  10:30
JUN   01  10:30
START/MEMORY
all.book  Page 146  Wednesday, April 26, 2000  7:08 PM 
						

							147
Please check the bottom righthand corner of the product number UX-3CR on the film box, or the 
final digit of the manufacturing number on the label at the beginning of the roll of ink film. 
If an “F” appears, please read pages 147 to 148. If an “F” does not appear, please read pages 149 
to 150.
S  H  A  R  PRevised date :                .Issued date :DEC.2.1999
MATERIAL SAFETY DATA SHEET (1/2)MSDS No B-1021.Section 1.  Product  Identification                                                                                                                                                                                           Product Code :     UX-3CR I maging Film                                                                                                                            Section 2.  Suppliers  Name  and  Address                                                                                                                                                                       Sharp Corporation
 22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
 Local suppliers are listed below.  Please contact the nearest supplier for additional information.
S e c t i o n  3 .   I n g r e d i e n t s                                                                                                                                                                                                             IngredientsCas No.ProportionOSHA PELACGIH TLVOther LimitsCarbon Black 1333-86-4 9% 3.5 mg/m33.5 mg/m3 -Paraffin Wax (fume)  8002-74-2 23% - 2.0 mg/m3-
Polyethylene terephthalate 25038-59-9 50 - 55% - - -
Ethylene-vinyl acetate copolymer 24937-78-8 1 - 5% - - -
Ester wax 8015-86-9 1 - 5% - - -
Polyester resin 27923-68-8 1 - 5% - - -
Synthetic wax 68989-34-4 1 - 5% - - -
Others  - 1 - 5% - - -
S e c t i o n  4 .   H a z a r d o u s   I d e n t i f i c a t i o n   ( E m e r g e n c y   O v e r v i e w )                                                                                                                                      This product is ink film for thermal transfer facsimile.
“Ink film” is a thin film coated with ink.
It is no special hazard under normal use condition.
S e c t i o n  5 .  H e a l t h   H a z a r d   D a t a                                                                                                                                                                                           Route(s) of Entry  :Inhalation?Skin?Ingestion?Not applicable Not applicable Possible but very unusual
Health Hazards :
The ingredients are not listed in ACGIH(1986) and OSHA(1989) except carbon black and paraffin wax.
Carcinogenicity : In 1996 the IARC reevaluated carbon black as a Groupe 2B carcinogen (possible human carcinogen). 
This classification is given to chemicals for which there is inadequate human evidence, but sufficient 
animal evidence on which to base an opinion of carcinogenicity.  The classification is based upon the 
development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels 
that induce particle overload of the lung.  Studies performed in animal models other than rats did not 
show any association between carbon black and lung tumors.
Signs and Symptoms of Exposure :  no data available
Medical Conditions Generally Aggravated by Exposure :  no data available
Emergency and First Aid Procedures :
  SKIN- - - - - - - - - Wash away ink on skin
  EYE - - - - - - - - - Wash away water and consult a doctor promptly.
  INHALATION- - - Not applicable
  OTHERS- - - - - - No data available  
(Country) (Name  and  Telephone  Number)
U.S.A. Sharp Document Network System of America
Telephone number for information: 1-800-237-4277
Emergency telephone number  : 1-800-255-3924
Canada Sharp Electronics of Canada Ltd.
Telephone number for information: 905-890-2100
Emergency telephone number  : 1-800-424-9300
United 
KingdomSharp Electronics (U.K.) Ltd.
Telephone number for information: 01923-474013
all.book  Page 147  Wednesday, April 26, 2000  7:08 PM 
						

							148
S  H  A  R  P
MATERIAL  SAFETY  DATA  SHEET  (2/2)MSDS No. B-1021
S e c t i o n  6 .   P h y s i c a l   C h e m i c a l   C h a r a c t e r i s t i c s                                                                                                                                     Boiling/Melting Point  No data availableSpecific Gravity No data available
 Vapor Pressure  No data availableSolubility in Water Negligible
 Vapor Density  No data availablePH No data available
 Evaporation Rate  No data availableViscosity No data available
 Appearance  Thin film coated with inkColor Black                  
 Odor  Slight wax odor
S e c t i o n  7 .   F i r e   a n d   E x p l o s i o n   D a t a                                                                                                                                                     Flash Point (Method Used):>150°C for ink
 Ignition Temperature:No data available Flammable Limits: (LEL); No data available  (UEL); No data available
 Extinguishing Media: Water mist, Foam,  Dry powder, CO
2 gas, others 
 Special Fire Fighting Procedure:No data available Unusual Fire and Explosion Hazard:None
 Sensitivity to Mechanical Impact: No hazardous effect by mechanical impact
 Sensitivity to Static Charge:
Not appicable
Section 8.  Reactivity  Data                                                                                                                                                                      Stability:Stable
 Incompatibility (Materials to Avoid):None
 Hazardous Decomposition:None
 Hazardous Polymerization: Will not occur
Section 9.  Precautions  for  Safe  Handling  and  Use                                                                                                                        Personal Protection Information (Respiratory, Eye Protection and Protective Glove)
: Hnad protection : Desireble in some cases
 Engineering Control / Ventilation:
No data available Work / Hygienic Practice:None
 Steps to be taken in case of Spill or Leak: If inadvertently released, rewind ribbon.
 Waste Disposal Method: Disposal in accordance with local, state and federal regulations.
S e c t i o n  1 0 .   R e g u l a t o r y   I n f o r m a t i o n                                                                                                                                                       NFPA Rating (U.S.A.): No information
 WHMIS Legislation (Canada): Not controlled
 Transport Information: No information
 UN No.: Not applicable
S e c t i o n  11 .   O t h e r   I n f o r m a t i o n                                                                                                                                                                References : IARC(1996) Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing 
Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp-149-261 
H. Muhle, B. Bellmann, O. Creutzenberg, C. Dasenbrock, H. Ernst, R. Kilpper, J. C. Mackenzie, P. Morrow, U. Mohr, 
S.Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats.  
Fundamental and Applied Toxicology 17, pp. 280-299
all.book  Page 148  Wednesday, April 26, 2000  7:08 PM