Sharp Xg C58x Projector User Manual

LCD PROJECTOR
MODEL
XG-C58X
XG-C68X
OPERATION MANUAL
Introduction
Connections and Setup
Basic Operation
Easy to Use Functions
Appendix 

IMPORTANT
• For your assistance in reporting the loss or theft of
your Projector, please record the Serial Number
located on the bottom of the projector and retain this
information.
•  Before recycling the packaging, please be sure that
you have checked the contents of the carton
thoroughly against the list of “Supplied accessories”
on page 
14 .Model No.:
Serial No.:
ii 

SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or  and of the same rating as
above, which is also indicated on the pin face of the plug, must be used\
.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compat\...

The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian,
Dutch, Portuguese, Chinese (Simplified Chinese) and Korean. Carefully read through the operation instructions
before operating the projector.
Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Franzö\
sisch, Schwedisch, Spanisch,
Italienisch, Niederländisch, Portugiesisch, Chinesisch (Einfaches Chinesisch) und Koreanisch. Bitte lesen Sie die
Bedienungsanleitung vor der...

Introduction
-1
Before using the projector, please read this operation manual carefully.
There are two important reasons for prompt warranty registration of your new SHARP Projector, using
the REGISTRATION CARD packed with the projector.1. WARRANTY This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification,...

-2
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode.
During normal operation, when putting the projector into the standby mode always use the STANDBY button on the
projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution...

Introduction
-3
Outstanding Features
1. Ultra High Brightness from a Compact Projector
•
• •
•
• 310W SHP Lamp
Use 310W SHP lamp for excellent color uniformity and ultra high brightness.
•
• •
•
• Power Save mode function enables lower noise levels, reduced power
consumption and longer lamp life.
2. Simple & Easy Operation
•
• •
•
• Color coded terminals, automatic signal search and graphical menu sys-
tem insure easy set-up and configuration.
•
• •
•
• Frequently used connections and controls are...

-4
Contents
Adjusting the Picture ........................................ 46
Adjusting Image Preferences .................................. 46
Selecting the Signal Type ....................................... 46
Progressive Mode .................................................... 47
Adjusting Computer Images ............................ 48
Computer Image Adjustment .................................. 48
Saving Adjustment Settings ..................................... 48
Selecting Adjustment Settings...

Introduction
-5
Locking the Operation Buttons
on the Projector ........................................... 72
Setting up the Keylock ............................................ 72
Canceling the Keylock Setting ................................ 72
Selecting the Transmission Speed(RS-232C) ..................................................... 73
Setting up a Password ...................................... 73
Entering the Password ............................................. 73
Changing the Password...

-61. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain InstructionsThe safety and operating instructions should be
r
etained for future reference.
3. Heed WarningsAll warnings on the product and in the operating
instructions should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners....