Sharp Xv Z10000u Projector User Manual

							Basic Operation
-39
 INPUT 3 / 4 Mode
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Page 70 +30 –30
+30 –30
+30 –30
+30 –30
+30 –30
11500 5500
Main menu Sub menu
Main menu Sub menu
Picture
Page 44Contrast
Bright
Color
Tint
Sharp
CLR Temp
Reset
Progressive Mode
2D Progressive
3D Progressive
Film Mode
PRJ Mode
Front
Ceiling + Front
Rear
Ceiling + Rear RS-232C
9600 bps
38400 bps
115200 bps
Language
Page 34
Status
+30 –30+30 –30
Custom 3 Custom 1
+30 –30
Color Selected
Target 
Lightness
Chroma
Hue
Reset (This Color)
Reset (All Colors)
View Settings[R] Red
[Y] Yellow
[G] Green
[C] Cyan
[B] Blue
[M] Magenta C.M.S.
Page 50Standard
DNR
OSD Display
Video System
BackgroundOFF
Level 1
Normal
Level A
Level B
Auto
PAL (50/60Hz)
SECAM
NTSC4.43
NTSC3.58
PAL-M
PAL-N
Blue
None
Economy ModeLevel 3
Options
Page 62
Power Save [ON/OFF]
RS-232C Port [ON/OFF]
Auto Power Off [ON/OFF]
Standard
Black Detail
Brighten
Custom 1
Custom 2
SVM Gamma
Standard
Custom 1
Custom 2
Custom 3
White Emphasis [ON/OFF] Gamma Position
Color Selected
Picture SettingMemory 5 Memory 1INPUT3 / 4 MemoryDigi. Shift
Subtitle
Reset
Lamp Timer
R-Gamma G-Gamma
B-Gamma
R-Gain
G-GainB-Gain
R-OffsetG-OffsetB-OffsetReset
Gamma PositionStandard
Black Detail
Brighten
Custom 1
Custom 2
SVM Gamma GammaPage 48+30 –30
+30 –30
+30 –30
+30 –30
+30 –30
+30 –30
+30 –30
+30 –30
+30 –30+30 –30
+30 –30 
						

							This projector has two sets of menu screens that allow you to adjust the image and various
projector settings.
You can operate the menus from the projector or remote control using the following proce-
dure.
Using the Menu Screen
Menu screen for INPUT 1,
INPUT 2 or INPUT 5 RGB modeMenu screen for INPUT 3,
INPUT 4 or INPUT 5 VIDEO Mode
Menu Bar
(Main Menu)
" "" "
"Menu Screen
Menu Selections
(Adjustments)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the
selected input mode is displayed.
•The on-screen display shown on the
lower right is displayed when the IN-
PUT 1, 2 or 5 mode is selected while
RGB signals are input.
Menu Bar
(Main Menu)
MENU button " "" "
", 
' '' '
', 
\ \\ \
\, 
| || |
|
buttons
ENTER button
MENU button
ENTER
button
' '' '
', 
" "" "
", 
\ \\ \
\, 
| || |
|
buttons
-40 
						

							Basic Operation
-41
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 38 and 39.
3Press 
" "" "
" or 
' '' '
' to select the item
you want to adjust.
Note
•To display a single adjustment item,
press 
 after selecting the item.
Only the menu bar and the selected
adjustment item will be displayed.
Then if you press " or ', the fol-
lowing item (“Bright” after “Con-
trast”) will be displayed.
•Press 
  to return to the previous
screen.
4Press 
\ \\ \
\ or 
| || |
| to adjust the item
selected.
•The adjustment is stored.
5Press .
•The menu screen will disappear.
| || |
| 
						

							
 Menu screen
Menu Selections
(Settings)
1Press .
•The menu screen is displayed.
Note
•The “Picture” menu screen for the
selected input mode is displayed.
•The on-screen displays shown on
the lower right are displayed when
INPUT 1, 2 or 5 mode is selected
while RGB signals are input.
2Press 
\ \\ \
\ or 
| || |
| to select the
menu you want to adjust.
Note
•For details on the menus, see the
tree charts on pages 38 and 39.
3Press 
" "" "
" or 
' '' '
' to select the
item you want to set.
Note
•Press  to return to the previous
screen.
•In some menus, select the icon us-
ing “
”.
Using the Menu Screen
MENU button " "" "
", 
' '' '
', 
\ \\ \
\, 
| || |
|
buttons
ENTER button
MENU button
ENTER
button
' '' '
', 
" "" "
", 
\ \\ \
\, 
| || |
|
buttons
Sub menu
-42 
						

							Basic Operation
-43
Sub menu
4Press 
| || |
|.
•The cursor shifts to the sub menu.
5Press 
" "" "
" or 
' '' '
' to select the set-
ting of the item displayed in the
sub menu.
6Press .
•The item selected is set.
Note
•Some adjustment items will display
a confirmation message.
When setting an item, press \ or
| to select “Ye s” or “OK” and then
press 
.
•Use 
 to select “ON” or “OFF” for
the item of “Economy Mode”.
7Press .
•The menu will disappear. 
						

							Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Adjusting Image Prefer-
ences
Note
•First select “INPUT # Memory” when you
want to save the “Picture” menu settings.
See page 47 for details.
Adjust the “Picture” menu on the menu
screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Picture adjustment settings differ depend-
ing on the type of input signal.
•The picture adjustments can be stored
separately in each input mode.
•Some items may not be adjustable de-
pending on the combination of the INPUT
mode and “Signal Type” setting.
•To reset all adjustment items, select “Re-
set” and press 
.
Contrast
Bright
Color
Tint
Sharp
CLR TempFor adjusting the contrast level
For adjusting the brightness of an image
For adjusting the color intensity of an image
For adjusting the tones of an image
For making sharper or softer the contour of an image
For adjusting the color temperature of an imageFor less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
Decreases color
temperature for warmer,
reddish, incandescent-
like images.
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
Increases color
temperature for cooler,
bluish, fluorescent-like
images.
Selected Item Description
\ button| button
-44 
						

							Basic Operation
-45
Emphasizing the
Contrast
This function emphasizes the bright portions
of images to obtain a higher contrast image.
Select “White Emphasis” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•ON
Emphasizes the bright portions of images.
•OFF
Disables “White Emphasis”.
Selecting the C.M.S.
Color
This function allows you to select the desired
color reproduction mode.
Select “Color Selected” in the “Picture”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Color can be adjusted in greater detail with
“C.M.S.” on the menu screen. See page
50 for details.
Selecting the Gamma
Position
This function allows you to select the desired
gamma position.
Select “Gamma Position” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•Gamma can be adjusted in greater detail
with “Gamma” on the menu screen. See
page 48 for details. 
						

							Progressive Mode
This function allows you to select the pro-
gressive display of a video signal. The pro-
gressive display projects a smoother video
image.
Select “Progressive Mode” in the “Pic-
ture” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
• 2D Progressive
This function is useful to display fast-
moving images such as sports and ac-
tion films. This mode optimizes the im-
age in a displayed frame.
•
 3D Progressive
This function is useful to display relatively
slow-moving images such as drama and
documentary more clearly.
This mode optimizes the image by esti-
mating the movement of a number of pre-
ceding and succeeding frames.
•
 Film Mode
Reproduces the image of film source
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
* The film source is a digital video record-
ing with the original encoded as is at 24
frames/second. The projector can con-
vert this film source to progressive video
at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a
high-definition image.
•When using progressive inputs, these
inputs are directly displayed so that 2D
Progressive, 3D Progressive and Film
Mode cannot be selected. These modes
can be selected in interlace signals other
than 1080
I.
•In NTSC or PAL60Hz, even if the 3D Pro-
gressive mode has been set, the three-
two pull down enhancement will be en-
abled automatically, when the film source
has been entered.
•In PAL50Hz or SECAM, the two-two pull
down enhancement will be enabled only
in the Film Mode, when the film source
has been entered.
Adjusting the Picture
-46 
						

							Basic Operation
-47
Picture Setting Func-
tion
This function stores all items set in “Picture”.
Five settings can be stored separately in
“Memory 1” to “Memory 5”. Each stored set-
ting is reassigned to each input mode (INPUT
1 to INPUT 5). Even when the input mode or
signal is changed, you can easily select opti-
mal settings from the stored settings.
When Saving:
Select “Memory #” or “INPUT # Memory”
before setting on the “Picture” menu.
Select “Picture Setting” in the “Picture”
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
When Recalling Saved Settings:
When a saved memory number is selected,
the “Picture” menu settings change accord-
ingly.
Note
•The items of “Picture Setting” can be se-
lected directly by pressing 
.  The items
change in the order of “Memory 1” –
“Memory 5” and then “INPUT #
Memory” each time 
 is pressed.
When Changing Saved Settings:
When changing the saved “Picture” menu
settings, select the memory number first.
PICTURE SETTING button
Description
Settings of all items in “Pic-
ture” can be stored for the re-
spective input modes. The
stored settings can be se-
lected in any input modes.
Besides “Memory 1” to
“Memory 5”, other settings
can be stored for each input
mode. “INPUT 1-5 Memory”
can be selected for each in-
put mode.
Selected item
Memory 1
to
Memory 5
INPUT 1 Memory
to
INPUT 5 Memory 
						

							Adjusting the Gamma
Use this function to select the gamma position and adjust the gamma curve for finer image
adjustment.
Selecting the Gamma
Position
Select “Gamma Position” in the
“Gamma” menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
•The gamma position you make the set-
ting in this menu for can be selected in
the “Gamma Position” in the “Picture”
menu.
•Select “Custom 1” or “Custom 2” to make
the more detailed gamma setting.
•For selecting “SVM Gamma”, refer to the
SharpVison Manager operation manual
(supplied).
Description
For Standard picture.
Gives greater depth to
darker portions of image.
Brightens darker portions of
image.
Allows you to adjust the
gamma curve for each of
RGB.
Allows you to adjust gamma
value using SharpVision
Manager Software.
Selected item
Standard
Black Detail
Brighten
Custom 1–2
SVM Gamma
Standard Black Detail Brighten
SVM GammaCustom 2Custom 1
-48