Sharp Xv Z10000u Projector User Manual
Have a look at the manual Sharp Xv Z10000u Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Easy to Use Functions -59 VIDEO • Select “DOT BY DOT” during 720P input when viewing 720P output from a computer. • 720P switches between “STRETCH” and “DOT BY DOT”. “STRETCH” is fixed when 1080I signal is entered. • “Digi. Shift” and “Subtitle” only move when in the “SMART STRETCH” and “CINEMA ZOOM” modes. 960 720 1280 720 480I 480P 576I 576P NTSC PAL SECAM 960 720 1280 720 480P –– 720P ––1280 720 1280 720 1280 720 SIDE BAR STRETCHCINEMA ZOOM SMART STRETCH 1280 720 – –1280 720 1280 720– – DOT BY DOT 1280 720 – 1080I For 4:3 aspect ratio For 16:9 aspect ratio 480I 480P 540P 576I 576P NTSC PAL SECAM 540P 1080I 720P Input Signal SIDE BAR *SMART STRETCHOutput screen image STRETCH DOT BY DOT CINEMA ZOOM 4:3 aspect ratio Letterbox 16:9 aspect ratio Squeeze * ** **
-60 COMPUTER • “NORMAL” is fixed when XGA (1024 × 768) signals are entered. 960 720 800 600 SVGA (800 600)NORMAL DOT BY DOT For 4:3 aspect ratio For without 4:3 aspect ratio960 720 1024 720 XGA (1024 768) 960 720 1280 720 SXGA (1280 960) 900 720 1280 720 SXGA (1280 1024) VGA SVGA XGA SXGA Input Signal NORMALOutput screen image DOT BY DOT 4:3 aspect ratio (640 480) 4:3 aspect ratio (800 600) 4:3 aspect ratio (1024 768) 5:4 aspect ratio (1280 1024) Selecting the Picture Display Mode
Easy to Use Functions -61 HIGH CONTRAST/ HIGH BRIGHTNESS MODE button Operating the Theater Mode Function Press the HIGH CONTRAST/HIGH BRIGHTNESS MODE button to se- lect the “HIGH CONTRAST MODE” or “HIGH BRIGHTNESS MODE”. Note •The projector is set to the “HIGH CON- TRAST MODE” when shipped from the factory. Switchable High Contrast/High Brightness Mode This function controls the quantity of the projected light and the contrast of the image. It can be operated using the HIGH CONTRAST/HIGH BRIGHTNESS MODE button on the projector. Set “HIGH BRIGHTNESS MODE” when the projector is used in a relatively bright room. Selected mode HIGH CONTRAST MODE HIGH BRIGHTNESS MODE Description This mode is recommended for dark environments. This mode is recommended for bright environments.
Digital Shift Function For easier viewing, this function shifts the entire image projected on the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Adjusting the Digital Shift Select “Digi. Shift” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •The Digital Shift Function works with the SMART STRETCH and CINEMA ZOOM screen. For details, see pages 59 and 60. Subtitle Setting With this function, you can adjust the vertical size of the display to allow for subtitles. Adjusting the Vertical Size of the Display Select “Subtitle” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •When changing the screen with the Sub- title setting, not only the bottom of the screen rises, but also the upper part is changed to a certain point. •The subtitle setting can be adjusted more effectively with the Digital Shift function. •The subtitle setting can be made only with the SMART STRETCH and CINEMA ZOOM screen. For details, see pages 59 and 60. -62
Easy to Use Functions -63 Video Digital Noise Reduction (DNR) System Reducing Image Noise Select “DNR” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •Set a level so as to view a clearer picture. Make sure to set DNR to “OFF” in the fol- lowing cases: •When the image is blurry. •When the contours and colors of moving images drag. •When TV broadcasts with weak signals are projected. Note •This function is available with INPUT 1, 2 (480 I, 480P, 580I and 580P signals) and INPUT 3, 4 (all signals). Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color noise. Confirming the Lamp Usage Time This function allows you to check the lamp usage time. Select “Options” menu to see the lamp usage time. Note •It is recommended that the lamp be changed after approximately 1,900 cumu- lative hours of use. Displaying the Lamp Usage Time Lamp Usage Time
This function allows you to turn on or off the on-screen messages. When setting “ Level A” or “ Level B” in “OSD Display”, the input mode display (e.g. INPUT 1) will not appear, even if the INPUT button is pressed. Setting On-screen Display Selected Item Normal Level A Level B Description All On-screen Displays are displayed. Input and Auto Sync are not displayed. All On-screen Displays are not displayed. (except for Menu, On-screen Displays displayed when the KEYSTONE button is pressed, and warning displays (Power off/Temp./Change The Lamp., etc.)) Turning Off the On-screen Display Select “OSD Display” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. -64
Easy to Use Functions -65 For INPUT 5 Set when RGB signals are received from video equip- ment. Set when analog component signals are received from video equipment. RGB Component Set when digital PC RGB signals are received from the computer. Set when digital PC com- ponent signals are re- ceived from the com- puter. Set when digital video RGB signals are re- ceived from video equip- ment. Set when digital video component signals are received from video equipment. Set when analog RGB signals are received. Set when analog compo- nent signals are re- ceived. D. PC RGB D. PC Comp. D. Video RGB D. Video Comp. A. RGB A. Comp. Selecting the Signal Type Select “Signal Type” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note For INPUT 1 and INPUT 2 For INPUT 5 For INPUT 1 and INPUT 2 Selecting the Signal Type This function allows you to select the input signal type RGB or Component for INPUT 1 and 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Analog RGB or Analog Component for INPUT 5. •The input signal type can also be switched by pressing . This switching at this time is only able to be performed for switching the of the above table. RGB/COMP. button
Setting the Video System Setting the Video System Select “Video System” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •The video signal can only be set in IN- PUT 3 or INPUT 4 mode. •In “Auto”, images are displayed in PAL even if PAL-N or PAL-M input signals are received. The video input system mode is preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be received, depending on the video signal differ- ence. In that case, switch the video signal. When connected to PAL video equipment. When connected to SECAM videoequipment. When reproducing NTSC signals in PAL video equipment. When connected to NTSC video equipment. PA L SECAM NTSC4.43 NTSC3.58 * If the input signal has interference, the screen will be displayed with the interference. Selecting a Background Image Select “Background” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Selected Item Blue None Description Blue screen Black screen * Setting a Background Image This function allows you to select the image displayed when no signal is being sent to the projector. -66
Easy to Use Functions -67 Selecting the Economy Mode These functions allow you to reduce the power consumption of the projector. Setting the Power Save Select “Power Save” in “Economy Mode” under the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •Although noise is reduced when “Pow er Save” is set to “ON”, brightness decreases by 20%. •“Power Save” mode is factory preset to “OFF”. •“Power Save” is switched on and off by pressing . RS-232C Off Function This projector consumes power when using a computer connected to the RS-232C terminal. When not using these terminals, “RS-232C Por t” can be set to “OFF” to reduce standby power consumption. Select “RS-232C Port” in “Economy Mode” under the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •Set “RS-232C Port” to “ON” when using the SharpVision Manager Software. •“RS-232C Port” is switched on and off by pressing . Brightness 80% 100% Status ON (Low power mode) OFF (Standard mode) Power consumption 220 W 270 W ON OFFRS-232C connection is set to “ON”. The RS-232C is operating at all times (to accept communications). RS-232C connection is set to “OFF”. RS-232C does not operate when the power supply is in standby.
Selecting the Economy Mode Selecting the Transmission Speed (RS-232C) This menu allows you to adjust the transmission speed of the RS-232C connection by select- ing the baud rate. -68 Selecting the Transmis- sion Speed (RS-232C) Select “RS-232C” in the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual for instructions for setting the computer’s baud rate. Automatic Power Off Function When no input signal is detected for more than 15 minutes, the projector will automatically turn off if set to “ON”. The Auto Power Off function will be disabled when it is set to “OFF”. Select “Auto Power Off” in “Economy Mode” under the “Options” menu on the menu screen. ➝For operating the menu screen, see pages 40 to 43. Note •When the Auto Power Off function is set to “ON”, 5 minutes before the power turns off, the message “Power OFF in X min.” will appear on the screen to indicate the remaining minutes. •“Auto Power Off” is switched on and off by pressing .