Sharp Xv Z2000 Projector User Manual

XV-Z2000
XV-
Z2000ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
Printed in China
Imprimé en Chine
Impreso en China
Impresso na China
TINS-B529WJZZ
04P11-CNM
SHARP CORPORATION
XV-Z2000U_E_Hyo1_4.p6504.10.14, 1:13 PM 1 

-1
ENGLISH
Before using the projector, please read this operation manual carefully.
WARNING:High brightness light source. Do not stare into the beam of light, or view directly. Be especially
careful that children do not stare directly into the beam of light.
WARNING:To reduce the risk of fire or electric shock, do not expose this product to
rain or moisture.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED...

-2
Caution Concerning Lamp Replacement
See “Replacing the Lamp” on page 56.
LAMP REPLACEMENT WARNING :TURN OFF THE LAMP AND DISCONNECT 
POWER CORD BEFORE OPENING THIS 
COVER. HOT SURFACE INSIDE. 
ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP. 
REPLACE WITH SAME SHARP LAMP UNIT MODEL 
AN-K2LP ONLY.
HIGH PRESSURE LAMP : RISK OF EXPLOSION. 
POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS 
RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.
SERVICEMAN-WARNING : USE RADIATION EYE AND 
SKIN PROTECTION DURING...

Introduction
-3
WARNING:
Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments.
Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or discompile
the contents thereof.
This SHARP projector uses a DMD panel. This very sophisticated panel contains 921,600 pixels micromirrors. As
with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there
are certain...

-4
Contents
Preparing
Setup
Setting Up the Projector .............................. 16Setting Up the Projector .................................... 16
Screen Size and Projection Distance ................ 17
Projecting a Reversed Image ............................ 18
Connections
Connections ................................................. 19INPUT Terminals and ConnectableMain Equipment .......................................... 19
Samples of Cables for Connection ............. 20
Connecting to Video...

Introduction
-5
Accessories
Remote control
RRMCGA334WJSATwo AA size batteries
■ 3 RCA to 15-pin D-sub cable (910 (3.0 m)) AN-C3CP2
■ DVI to 15-pin D-sub adaptor (7.9 (20 cm)) AN-A1DV
■ DVI cable ( 910 (3.0 m)) AN-C3DV
■ Lamp unit AN-K2LP
Note
•Some of the optional accessories may not be available depending on the region. Please check with your
nearest Authorized SharpVision Service Center or Dealer.
Lens cap (attached)
PCAPHA021WJSA
Supplied accessories
Optional accessories
Operation manual...

-6
1. Read InstructionsAll the safety and operating instructions should be read before
the product is operated.
2. Retain InstructionsThe safety and operating instructions should be retained for
future reference.
3. Heed WarningsAll warnings on the product and in the operating instructions
should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners....

-7
Introduction
Ensure that you read the following safeguards when
setting up your projector.
Caution concerning the lamp unit
■Potential hazard of glass
particles if lamp ruptures.
In case of lamp rupture,
contact your nearest Au-
thorized SharpVision
Service Center or Dealer
for a replacement.
See “Replacing the Lamp” on page 56.
Caution concerning the setup of the pro-
jector
■For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free...

-8
Caution regarding usage of the projector
■When using the projector, ensure not to sub-
ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with the
lens. If you are not to use the projector for a
long time, ensure to unplug the power cord
from the wall outlet, and disconnect any other
cables connected to it.
■Do not use the projector by holding the lens.
■
When you are not to use the projector for a long
time, or storing the projector, ensure to attach
the lens cap...

-9
Introduction
38Adjustment buttons 
('/"/\/|)
Select menu items and other 
settings.
29INPUT buttonSwitch input mode 1, 2, 3, 4, 
5 or DIGITAL.
30
10
5410
54
ZOOM/FOCUS buttonAdjust the projected image 
size or adjust the focus.
Temperature warning 
indicator Lamp indicator
10Power indicator
31
31
13Remote control sensor
HEIGHT ADJUST buttonFront adjustment foot 
(on the bottom of 
the projector)
38MENU buttonDisplay adjustment and 
setting screens.
39ENTER buttonSet items selected or 
adjusted...