Sharp Xv Z2000 Projector User Manual

-20
Terminal on the
projector
INPUT 1, 2
INPUT 1, 2
INPUT 5/DIGITAL
INPUT 5/DIGITAL
INPUT 4
INPUT 4
INPUT 3
INPUT 3
RS-232C Equipment
Audio-visual
equipment
Computer
Computer
Terminal on
connected equipment
Component
video 
output
terminal
Terminal
for using
the
dedicated
cable
DVI output
terminal
RGB output
terminal
Video
output
terminal
Terminal
for using
the
dedicated
cable
S-video
output
terminal
Terminal
for using
the
dedicated
cable
RS-232C
terminal
Cable
Component cable (commercially available)...

-21
Connections
Connecting to Video Equipment
Before connecting, ensure to unplug the power cord of the projector from the AC outlet and
turn off the devices to be connected. After making all connections, turn on the projector and
then the other devices.
Ensure to read the operation manuals of the devices to be connected before making connections.
When connecting the component video equipment to the component input ter\
minal on the
projector (INPUT 1 or INPUT 2)
Component cable
(commercially available)...

-22
When connecting the video equipment with RGB output terminal (INPUT 5)\
•Before connecting the cable, switch the digital input type switch to “VIDEO”.
INPUT 5 terminal
DVI to 15-pin D-sub adaptor(sold separately: AN-A1DV)
RGB output terminal
RGB cable
(commercially available)
DVD Player,etc.
4
32
Switch to “VIDEO”1
Connecting to Video Equipment
Note
•
For this connection, select “RGB” for “Signal Type” on the OSD menu or press  on the remote control.
(See page  48.)
When connecting the component...

-23
Connections
DIGITAL terminal
DVI output terminal
DVI cable
(sold separately: AN-C3DV)
Switch to “VIDEO”DVD Player,etc.
2
31
Note
•Select DIGITAL mode when connecting to video equipment with the digital output terminal. (See page
29.)
When connecting the video equipment with DVI output terminal (DIGITAL INPUT)
•Before connecting the cable, switch the digital input type switch to “VIDEO”.
XV-Z2000U_E_P19_27.p6504.10.13, 0:15 PM 23 

-24
When connecting video equipment with S-video output terminal (INPUT 3)
When connecting video equipment with video output terminal (INPUT 4)
S-video cable
(commercially available) S-video output terminal
INPUT 3 terminal
DVD Player,etc.
2
1
INPUT 4 terminal Video output terminal
Composite video cable
(commercially available)
DVD Player,etc.
1 2
Connecting to Video Equipment
XV-Z2000U_E_P19_27.p6504.10.13, 0:15 PM 24 

-25
Connections
Connecting to a Computer
Connecting to a computer (INPUT 5)
•Before connecting the cable, switch the digital input type switch to “PC”.
RGB output terminalINPUT 5 terminal
RGB cable (commercially available)
DVI to 15-pin D-sub adaptor
(sold separately: AN-A1DV)
Computer
4
32
Switch to “PC”1
Note
•Refer to “Computer Compatibility Chart” on page 61 for a list of computer signals compatible with the projector. Use
with computer signals other than those listed may cause some of the functions...

-26
Connecting to a computer with DIGITAL RGB output Terminal (DIGITAL)
•Before connecting the cable, switch the digital input type switch to “PC”.
INPUT 5 terminal
DVI output terminal
DVI cable
(sold separately: AN-C3DV)
Switch to “PC”
Computer
2
31
Note
•Select DIGITAL mode when connecting to digital output terminal of the computer. (See page 29.)
•Before switching “Digital input type switch” and connecting, ensure to unplug the power cord of the pro-
jector from the AC outlet and turn off the computer...

-27
Connections
Controlling the Projector by a Computer
When the RS-232C terminal on the projector is connected to a computer, the computer can be used to control
the projector and check the status of the projector.
When connecting to a computer using an RS-232C serial control cable
Note
•The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the
operation manual of the computer for details.
•See “RS-232C Specifications and Command Settings” on page 60 for...

-28
Turning the Projector On/Off
Info
•English is the factory preset language. If you want to
change the on-screen display to another language,
change the language according to the procedure on
page 52.
Lamp
indicator Power indicator
STANDBY
buttonON button
Lens cap
ON button
STANDBY
button
▼On-screen Display
Info
•Do not unplug the power cord during projection or cool-
ing fan operation. The cooling fan in this projector contin-
ues to run for about 90 seconds after the projector enters
the standby...

-29
Basic Operation
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
Press  ,  ,  ,  ,  or  on
the remote control to select the input
mode.
• •• •
•When pressing  on the projector, input mode
switches in order of :
INPUT 1 INPUT 2 INPUT 3
INPUT 5 INPUT 4DIGITAL
Note
•When no signal is received, “NO SIGNAL”
will be displayed. When a signal that the
projector is not preset to receive is received,
“NOT REG.” will be displayed.
•The INPUT mode is not displayed when...