Shredder Stiga RECYCLING BIO-SILENT 8217 3044 02 Instructions Manual

STIGA 
RECYCLING
BIO-SILENT

INSTRUCTIONS FOR USE £ ®I
8217-3044-02 

Läs noga 
samtliga 
instruktio-
ner.Varning! Håll 
åskådare 
borta. Se upp 
med utkas-
tade föremål. Va r n i n g !  F ö r  
ej in hand 
eller fot 
underkåpan 
då maskinen 
är igång. Varning! - 
roterande 
knivar.
Drag ur stick-
kontakten 
innan någon 
typ av under-
håll utförs. Knivarna 
fortsätter att 
rotera efter 
det att 
maskinen 
stängts av. Använd 
skyddshand-
skar, skydds-
glasögon och 
hörselskydd. 
Lue käyttö-
ohje huolelli-
sesti. Va r o i t u s !  P i d ä  
sivulliset kau-
kana. Varo...

Read these 
instructions 
for use care-
fully.Warning! 
Keep specta-
tors away. 
Beware of 
objects being 
flung out. War ning! Do 
not put hands 
or feet under 
the cover of 
the machine 
when it is run-
ning. Warning - 
rotating 
blades!
Remove the 
plug from the 
wall socket 
before carry-
ing out any 
kind of main-
tenance. The blades 
will con-
tinue to 
rotate after 
the machine 
has been 
switched off.Wear safety 
gloves, safety 
goggles and 
hearing pro-
tection.
Leer atenta-
mente las...

SVENSKAS
4.
2.
1.
3.
4. 

SVENSKA
S
7.
5.
8.9.
6. 

ENGLISHGB
SAFETY INSTRUCTIONS
This symbol indicates WARNING. 
Personal injury and/or damage to property 
may result if the instructions are not 
followed carefully.
GENERAL
• Study the warning stickers on the machine. Replace damaged or illegible warning stickers.
• Please read through these instructions carefully. 
Learn all the controls and the correct use of the 
machine. Keep these instructions.
• Never use the machine if others, particularly  children or animals, are in the vicinity. Anyone 
who is...

ENGLISHGB
• When, after many years of service, your machine needs to be replaced or  is no longer required, we 
recommend that the machine is returned to your 
distributor for recycling.
ASSEMBLY
LEGS
1.  The legs are different on the left and right sides. 
Check that the legs are assembled so that they 
are angled outwards (fig. 1).
2. Thread the wheel axle through the holes in the  legs and through the tube (fig. 2).
3.  Install the wheels on th e wheel axle with wash-
ers, spacers and nuts (fig. 3)....

ENGLISHGB
CHANGING DIRECTION OF 
ROTATION
To change the direction of rotation, first 
turn the control to position 0 and wait until 
the spiral cutter has stopped. Then turn the 
control clockwise and turn on the main 
switch (1). (fig. 9).
MOTOR PROTECTION
The grinder is equipped with a built-in motor 
protection which prevents the motor being 
overloaded.
In the event of overloading, the main switch is 
turned off automatically. The current is broken. 
After 5 minutes of cooling, the motor can be...

ENGLISHGB
the ground (cold composting).
-  The material can be placed in a plastic  container, wooden crate, skeleton container or 
similar (cold composting).
-  The material can be placed in an insulated  compost holder. The heat is then held for longer 
and the rotting process also continues during 
the winter. This method produces faster results 
(warm composting).
-  The material can be spread directly onto the  garden (surface composting).
ADJUSTING THE SHAVING PLATE
The cutting mechanism is...

ENGLISHGB
PURCHASE TERMS
A full warranty is issued against manufacturing 
and material defects. The user must carefully 
follow the instructions given in the enclosed 
documentation.
Warranty period
For consumer use: two years from the purchase 
date.
Exceptions
The guarantee does not cover damage due to:
- Neglect by the user to acquaint themselves with accompanying documentation
- Carelessness 
- Incorrect and non-permitted use or assembly
- The use of non-genuine spare parts
- The use of accessories...