SMC Networks Router SMCWBR14T User Manual

							38 Tesla
Irvine, CA 92618
Phone: (949) 679-8000
Wireless Broadband Router
From SMC’s line of award-winning connectivity solutions
May 2005
R01 F/W 1.00
149100019300J 
						

							Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by our 
company for its use, nor for any infringements of patents or other rights of third parties which may result 
from its use. No license is granted by implication or otherwise under any patent or patent rights of our 
company. We reserve the right to change specifications at any time without notice.
Copyright © 2005 by 
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
All rights reserved.
Trademarks:
Product and company names are trademarks or registered trademarks of their respective holders. 
						

							i
LIMITED WARRANTY
Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be 
free from defects in workmanship and materials, under normal use and service, for the 
applicable warranty term. All SMC products carry a standard 90-day limited warranty from 
the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, 
repair or replace any product not operating as warranted with a similar or functionally 
equivalent product, during the applicable warranty term. SMC will endeavor to repair or 
replace any product returned under warranty within 30 days of receipt of the product. 
The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering 
new products within 30 days of purchase from SMC or its Authorized Reseller. Registration 
can be accomplished via the enclosed product registration card or online via the SMC web 
site. Failure to register will not affect the standard limited warranty. The Limited Lifetime 
warranty covers a product during the Life of that Product, which is defined as the period of 
time during which the product is an “Active” SMC product. A product is considered to be 
“Active” while it is listed on the current SMC price list. As new technologies emerge, older 
technologies become obsolete and SMC will, at its discretion, replace an older product in its 
product line with one that incorporates these newer technologies. At that point, the obsolete 
product is discontinued and is no longer an “Active” SMC product. A list of discontinued 
products with their respective dates of discontinuance can be found at:
http://www.smc.com/index.cfm?action=customer_service_warranty.
All products that are replaced become the property of SMC. Replacement products may be 
either new or reconditioned. Any replaced or repaired product carries either a 30-day limited 
warranty or the remainder of the initial warranty, whichever is longer. SMC is not responsible 
for any custom software or firmware, configuration information, or memory data of 
Customer contained in, stored on, or integrated with any products returned to SMC pursuant 
to any warranty. Products returned to SMC should have any customer-installed accessory or 
add-on components, such as expansion modules, removed prior to returning the product for 
replacement. SMC is not responsible for these items if they are returned with the product.
Customers must contact SMC for a Return Material Authorization number prior to returning 
any product to SMC. Proof of purchase may be required. Any product returned to SMC 
without a valid Return Material Authorization (RMA) number clearly marked on the outside 
of the package will be returned to customer at customer’s expense. For warranty claims within 
North America, please call our toll-free customer support number at (800) 762-4968. 
Customers are responsible for all shipping charges from their facility to SMC. SMC is 
responsible for return shipping charges from SMC to customer. 
						

							LIMITED WARRANTY
ii
WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS 
WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR 
REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE 
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN 
LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, 
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, 
INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR 
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER 
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, 
MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE 
UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE 
ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY 
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER 
INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR, OR 
ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY 
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT 
OR TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR 
INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE 
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR 
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE 
SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR 
INTERRUPTION OF ITS PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED 
RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES 
OR THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR 
CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS 
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS 
WARRANTY SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.
* SMC will provide warranty service for one year following discontinuance from the active 
SMC price list. Under the limited lifetime warranty, internal and external power supplies, fans, 
and cables are covered by a standard one-year warranty from date of purchase.
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618 
						

							
iii
COMPLIANCES
Federal Communication Commission Interference 
Statement
This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to 
provide reasonable protection against har mful interference in a residential 
installation.  This equipment generates , uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio co mmunications.  However, there is no 
guarantee that interference will not occur in a particular installation.  If this 
equipment does cause harmful interference to  radio or television reception, which 
can be determined by turning the equipment  off and on, the user is encouraged to 
try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna
 Increase the separation between the equipment and receiver
 Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected
 Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device  may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
FCC Caution : Any changes or modifications not  expressly approved by the party 
responsible for compliance could void the users authority to operate this 
equipment.
IMPORTANT NOTE:
This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with a 
minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is 
firmware-limited to channels 1 through 11. 
						

							COMPLIANCES
iv
Industry Canada Statement
Operation is subject to the following two conditions:
1. this device may not cause interference and
2. this device must accept any interference, including interference that may 
cause undesired operation of the device
To prevent radio interference to the licensed service, this device is intended to be 
operated indoors and away from windows to provide maximum shielding. 
Equipment (or its transmit antenna) that is installed outdoors is subject to 
licensing.
This device has been designed to operate with an antenna having a maximum 
gain of 1.5 dBi. 
Antenna having a higher gain is strictly prohibited per regulations of Industry 
Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain 
should be so chosen that the EIRP is not more than required for successful 
communication.
To prevent radio interference to the licensed service, this device is intended to be 
operated indoors and away from windows to provide maximum shielding. 
Equipment (or its transmit antenna) that is installed outdoors is subject to 
licensing.
EC Declaration of Conformity 
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuos Gelabert 6-8, 2o, 4a,
08970 - Sant Joan Despi,
Barcelona, Spain.
Marking by the above symbol indicates compliance with the Essential 
Requirements of the R&TTE Directive of the European Union (1999/5/EC). This 
equipment meets the following conformance standards:
 EN 300 328-1 December 2001 V1.3.1
 EN 300 328-2 December 2001 V1.2.1
 EN 301 489-1 September 2001 V1.4.1
 EN 301 489-17 September 2000 V1.2.1
 EN 60950 January 2000 
						

							COMPLIANCES
v
Countries of Operation & Conditions of Use in the European 
Community
This device is intended to be operated in all countries of the European 
Community. Requirements for indoor vs. outdoor operation, license requirements 
and allowed channels of operation apply in some countries as described below:
Note: The user must use the configuration utility provided with this product to 
ensure the channels of operation are in conformance with the spectrum 
usage rules for European Community countries as described below.
 This device requires that the user or installer properly enter the current country 
of operation in the command line interface as described in the user guide, before 
operating this device.
 This device will automatically limit the allowable channels determined by the 
current country of operation. Incorrectly entering the country of operation may 
result in illegal operation and may cause harmful interference to other system. 
The user is obligated to ensure the device is operating according to the channel 
limitations, indoor/outdoor restrictions and license requirements for each 
European Community country as described in this document.
 This device may be operated indoors or outdoors in all countries of the European 
Community using the 2.4 GHz band: Channels 1 - 13. 
						

							COMPLIANCES
vi
Declaration of Conformity in Languages of the European 
Community
English Hereby, SMC Networks, declares that this Radio LAN device is in 
compliance with the essential requirements and other relevant 
provisions of Directive 1999/5/EC.
Finnish Valmistaja SMC Networks vakuuttaa täten että Radio LAN device 
tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja 
sitä koskevien direktiivin muiden ehtojen mukainen.
Dutch Hierbij verklaart SMC Networks dat het toestel Radio LAN device 
in overeenstemming is met de essentiële eisen en de andere 
relevante bepalingen van richtlijn 1999/5/EG
Bij deze SMC Networks dat deze Radio LAN device voldoet aan 
de essentiële eisen en aan de overige relevante bepalingen van 
Richtlijn 1999/5/EC.
French Par la présente SMC Networks déclare que lappareil Radio LAN 
device est conforme aux exigences essentielles et aux autres 
dispositions pertinentes de la directive 1999/5/CE
Swedish Härmed intygar SMC Networks att denna Radio LAN device står 
I överensstämmelse med de väsentliga egenskapskrav och 
övriga relevanta bestämmelser som framgår av direktiv 1999/5/
EG.
Danish Undertegnede SMC Networks erklærer herved, at følgende 
udstyr Radio LAN device overholder de væsentlige krav og 
øvrige relevante krav i direktiv 1999/5/EF
German Hiermit erklärt SMC Networks, dass sich dieser/diese/dieses 
Radio LAN device in Übereinstimmung mit den grundlegenden 
Anforderungen und den anderen relevanten Vorschriften der 
Richtlinie 1999/5/EG befindet. (BMWi)
Hiermit erklärt SMC Networks die Übereinstimmung des Gerätes 
Radio LAN device mit den grundlegenden Anforderungen und 
den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. 
(Wien)
Greek