Sony Ae 5 Service Manual

11
33
First Time Operation
Advanced OperationAdvanced PresettingSorting of Programme PositionsAfter having used Automatic Tuning of channels you may wish to rearrange
the order of the channels.
1Press MENU. Select the symbol 
 using $. Push to Ó.
2Select Programme Sorting using $. Push to Ó to enter.
3Select the programme position of the channel you wish to sort using 4 or $.
Push to Ó to enter.
4Move the channel to the new programme position using 4 or $. Store by
pressing OK.
The channel is now at the...

12
34Captioning a Station NameDuring presetting the channels are usually labelled automatically.
You can, however, individually name a channel or a video input source.
1Press MENU. Select the symbol 
 using $. Push to Ó.
2Select Installation using $. Push to Ó to enter.
Select Manual Programme Preset using $. Push to Ó to enter.
3Select the programme position of the channel or the video source you wish to
label  by pushing to $ or 4. Push repeatedly to Ó until the first element of the
position LABEL is...

13
36
When connecting an RGB source such as a Sony playstation you may need to
readjust the picture geometry.
1Select the connected RGB source 
  by pressing É repeatedly.
2Press MENU. Select the symbol  using $. Push to Ó.
3Select Installation using $. Push to Ó to enter. Select RGB Set Up using $.
Push to Ó to enter.
4Select H Centre by pushing to Ó. Adjust the centre of the picture
(range from -5 to +5) using 4 or $. Store by pressing OK.
5Select H Size using $. Push to Ó to enter. Adjust the...

14
38Advanced TV operation
Picture and sound are adjusted at the factory. You can, however, adjust
them individually.
1Press MENU.
Select the symbol 
 for Picture or 
 for Sound using 4 or $.
Push to Ó to enter.
The menu Picture or Sound Control is displayed.
2Select the desired item using 4 or $. Push to Ó to enter.
3Adjust the selected item using 4, $, Ó and Ò. Press OK to store.Refer to the tables on this and the following page for more information.
4Repeat steps 2 and 3 to adjust other items.
5Press...

15
40Using the Features Menu1Press MENU. Select the symbol 
 using $. Push to z.
2Select the desired menu item using $. Push to z to enter.
3Select the desired setting using  4 or $.
4Store by pressing OK.
5Press MENU to return to the normal TV screen.
Advanced Operation
Advanced TV operationFeaturesItem Effect/Operation
Auto Format$On:  Automatic selection of the screen format
4Off:  Normal mode
PIP Position See next page for details
Sleep Timer
You can select a time period after which the TV
switches...

16
42TeletextMost TV channels broadcast information via teletext. The index page of the teletext
service (usually page 100) gives you information on how to use their service.!Make sure to use a TV channel with a strong signal, otherwise there may be
Teletext errors.Direct Access FunctionsSwitching Teletext on and off1Select the TV channel which carries the teletext service you want to view.
2aPress f @¼ once to switch teletext on.
The teletext menu is displayed.
bPress f twice for Mix mode.The TV...

17
2-1. REAR COVER REMOVAL 
 2-3. SERVICE POSITION 2-2. CHASSIS ASSY REMOVAL
      1
6 Screws 
BTV 4x16
  2   Rear Cover
 2-4. U BOARD REMOVAL
1   Push the claw 
in the direction of 
the arrow and 
remove.
2   Pull the Board in 
the direction of the 
arrow and remove.
SECTION 2
DISASSEMBLY 

18
2-5. J BOARD REMOVAL
 2-7. B1 BOARD REMOVAL 2-6. J SHIELD REMOVAL
1   Push the claw in 
the direction of the 
arrow and remove.
2   Pull the Board in 
the direction of the 
arrow and remove.
1   Push the claw in 
the direction of the 
arrow and remove.
2   Push the 
claw in the 
direction of 
the arrow 
and remove.
3   Remove the shield in 
the direction of the arrow.
All other boards are removed in a 
similar manner to those shown
NOTE 

19
Anode button
a
*   REMOVING  PROCEDURES.
Turn up one side of the rubber cap in
the direction indicated by the arrow  a 12    Using a thumb pull up the rubber cap
      firmly in the direction indicated by the
      arrow  b3    When one side of the rubber cap is
      separated from the anode button, the
      anode-cap can be removed by turning
      up the rubber cap and pulling it up in
      the direction of the arrow   c
bbc
Note : Short circuit the anode of the picture tube and the anode cap to...

20
REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET
BOTTOM PLATES.(1) REMOVING THE PLATESIn the event of servicing being required to the solder side of the D Board printed
wiring board, the bottom plates fitted to the main chassis bracket require to be
removed.
This is performed by cutting the gates with a sharp wire cutter at the locations
indicated by arrows.
Note :There are 4 plates fitted to the main bracket and secured by 4 gates.
Only remove the necessary plate to gain access to the printed wiring...