Sony Bdv E370 Operating Instructions

							Other Operations
51GB
Using the Sleep Timer
You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
The time can be preset in intervals of 10 
minutes.
Press SLEEP.
Each time you press SLEEP, the minutes display 
(the remaining time) changes by 10 minutes.
When you set the sleep timer, “SLEEP” flashes 
in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired 
time.
Deactivating the Buttons 
on the Unit
(Child Lock)
You can deactivate the buttons on the unit 
(except for "/1) for preventing misoperation, 
such as child mischief (child lock function).
Press x on the unit for more than 5 
seconds.
“CHILD LOCK” and “ON” appear in the front 
panel display.
The child lock function is activated and the 
buttons on the unit are locked. (You can operate 
the system by using the remote.)
To cancel, press x for more than 5 seconds so 
that “CHILD LOCK” and “OFF” appear in the 
front panel display.
Note When you operate the buttons on the unit while the 
child lock function is on, “CHILD LOCK” appears in 
the front panel display.
Controlling Your TV with 
the Supplied Remote
By adjusting the remote signal, you can control 
your TV with the supplied remote.
Note When you replace the batteries of the remote, the 
code number may reset itself to the default (SONY) 
setting. Reset the appropriate code number.
Press and hold TV [/1 while entering your 
TV’s manufacturer’s code (see the table) 
using the number buttons. Then release TV 
[/1.
If the setting is unsuccessful, the currently 
registered code is not changed. Re-enter the 
code number.
Code numbers of controllable TVs
If more than one code number is listed, try 
entering them one at a time until you find the 
code that works with your TV.
Saving Power in Standby 
Mode
Check that the following settings are made:
– [Control for HDMI] in [HDMI Settings] is set 
to [Off] (page 46).
– [Standby] in [S-AIR Settings] is set to [Off] 
(page 43).
– [Quick Start Mode] is set to [Off] (page 56).
Preparing the remote for 
controlling the TV
Manufacturer Code number
SONY 01 (default)
SAMSUNG 02, 08
LG 05
PHILIPS 02, 03, 07
PANASONIC 06
TOSHIBA 04
 
						

							52GB
Using the Setup Display
You can make various adjustments of items such 
as picture and sound.
Select   (Setup) on the home menu when you 
need to change the settings of the system.
The default settings are underlined.
Note Playback settings stored in the disc take priority over 
the Setup Display settings and not all the functions 
described may work.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select   [Setup].
3Press X/x to select the setup category 
icon to change, then press  .
Example: [Screen Settings]
You can setup the following options.
[Network Update]
You can update and improve the functions of the 
system.
For information about update functions, refer to 
the following website:
For customers in Europe and Russia
http://support.sony-europe.com/
For customers in Asia and Australia
http://www.sony-asia.com/support
Settings and Adjustments
Icon Explanation
[Network Update] (page 52)
Updates the software of the 
system.
[Screen Settings] (page 53)Makes the screen settings 
according to the type of 
connecting jacks.
Setup
TV Type
Set the screen aspect ratio of your TV.
Screen FormatOriginal
DVD Aspect RatioLetter Box
Auto
Cinema Conversion Mode
[Audio Settings] (page 54)Makes the audio settings 
according to the type of 
connecting jacks.
[BD/DVD Viewing Settings] 
(page 55)
Makes detailed settings for BD/
DVD playback.
[Parental Control Settings] 
(page 55)
Makes detailed settings for the 
Parental Control function.
[Music Settings] (page 56)Makes detailed settings for 
Super Audio CD playback.
[System Settings] (page 56)Makes the system-related 
settings.
[Network Settings] (page 57)Makes detailed settings for 
Internet and network.
[Easy Setup] (page 58)Re-runs the Easy Setup to make 
the basic settings.
[Resetting] (page 58)Resets the system to the factory 
settings.
Icon Explanation
 
						

							Settings and Adjustments
53GB
[Screen Settings]
x[3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all contents in 2D.
x[TV Screen Size Setting for 3D]
Sets the screen size of your 3D compatible TV.
x[TV Type]
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide-mode function.
[4:3]: Select this when connecting to a 4:3 
screen TV without a wide-mode function.
x[Screen Format]
[Original]: Select this when connecting to a TV 
with a wide-mode function. Displays a 4:3 
screen picture in 16:9 aspect ratio even on a 
wide-screen TV.
[Fixed Aspect Ratio]: Changes the picture size 
to fit the screen size with the original picture 
aspect ratio.
x[DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with black 
bands on the top and bottom.
[Pan & Scan]: Displays a full-height picture on 
the entire screen, with trimmed sides.
x[Cinema Conversion Mode]
[Auto]: Normally select this. The unit 
automatically detects whether the material is 
video-based or film-based, and switches to the 
appropriate conversion method.
[Video]: The conversion method suited for 
video-based material will always be selected 
regardless of the material.
x[Output Video Format]
[HDMI]: Normally select [Auto]. Select 
[Original Resolution] to output the resolution 
recorded on the disc. (When the resolution is 
lower than SD resolution, it is scaled up to SD 
resolution.)
[Component Video]: Select the resolution that 
suits your TV.
[Video]: Automatically sets the lowest 
resolution.
Note When connecting the HDMI OUT jack and other 
video output jacks at the same time, select 
[Component Video].
 If no picture appears when setting [HDMI] or 
[Component Video] resolution, try another resolution 
setting.
x[BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video 
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not 
compatible with 1080/24p video signals.
x[YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of 
external device, and switches to the matching 
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video 
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video 
signals.
[RGB]: Select this when connecting to a device 
with an HDCP-compliant DVI jack.
x[HDMI Deep Colour Output]
[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video 
signals when the connected TV is compatible 
with Deep Colour.
[Off]: Select this when the picture is unstable or 
colors appear unnatural.
x[Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that 
move dynamically, is output with no jitter. 
Normally select this position.
 
						

							54GB
[Frame]: The picture, including subjects that do 
not move dynamically, is output in high 
resolution.
[Audio Settings]
x[BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the 
interactive audio and secondary audio to the 
primary audio.
[Off]: Outputs the primary audio only. Select 
this when outputting HD audio signals to an AV 
receiver.
x[Audio DRC]
You can compress the dynamic range of the 
sound track.
[Auto]
: Performs playback at the dynamic range 
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track 
with the kind of dynamic range that the 
recording engineer intended.
x[Attenuate - AUDIO]
Distortion may occur when you listen to a 
component connected to the AUDIO (AUDIO 
IN L/R) jacks. You can prevent distortion by 
reducing the input level on the unit.
[On]
: Attenuates the input level. The output 
level is changed.
[Off]: Normal input level.
x[Audio Output]
The system cannot output multi-channel sound 
from both the HDMI OUT jack and system’s 
speakers simultaneously.
[Speaker]
: Outputs multi-channel sound from 
the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel 
sound from the system’s speakers and 2-channel 
linear PCM signals from the HDMI OUT jack.[HDMI]: Outputs sound from the HDMI OUT 
jack only. Sound format depends on the 
connected component.
Note When you set [Audio Output] to [HDMI], the 
SOUND MODE, “D.BASS,” “NIGHT MODE,” and 
“SUR.SETTING” functions are disabled.
 When the System Audio Control function (page 47) 
is activated, this setting may change automatically.
x[Sound Effect]
You can set the system’s sound effects (SOUND 
MODE, “D.BASS,” “NIGHT MODE,” and 
“SUR.SETTING”
) to on/off.
[On]
: Enables all of the system’s sound effects. 
The upper limit of sampling frequency is set to 
48 kHz. 
[Off]: The sound effects are disabled. Select this 
when you do not want to set the upper limit of 
sampling frequency.
x[Speaker Settings]
To obtain the best possible surround sound, set 
the speakers. For details, see “Setting the 
Speakers” (page 49).
x[Auto Calibration]
You can calibrate the appropriate settings 
automatically. For details, see “Calibrating the 
Appropriate Settings Automatically” (page 48).
 
						

							Settings and Adjustments
55GB
[BD/DVD Viewing 
Settings]
You can make detailed settings for BD/DVD 
playback.
x[BD/DVD Menu]
You can select the default menu language for 
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the 
display for entering the language code appears. 
Enter the code for your language by referring to 
“Language Code List” (page 73).
x[Audio]
You can select the default track language for 
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given 
priority in the disc is selected.
When you select [Select Language Code], the 
display for entering the language code appears. 
Enter the code for your language by referring to 
“Language Code List” (page 73).
x[Subtitle]
You can select the default subtitle language for 
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the 
display for entering the language code appears. 
Enter the code for your language by referring to 
“Language Code List” (page 73).
x[BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
x[BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]
: Prohibits Internet connection.
x[BD Data Storage Options]
[Internal memory]: Selects the internal memory 
to store BD data.
[USB device (front)]: Selects the   (USB) port 
on the front panel to store BD data.
[USB device (rear)]: Selects the   (USB) port 
on the rear panel to store BD data.
[Parental Control 
Settings]
x[Password]
Set or change the password for the Parental 
Control function. A password allows you to set 
a restriction on BD-ROM, DVD VIDEO, or 
Internet video playback. If necessary, you can 
differentiate the restriction levels for BD-ROMs 
and DVD VIDEOs.
x[Parental Control Area Code]
Playback of some BD-ROMs or DVD VIDEOs 
can be limited according to the geographic area. 
Scenes may be blocked or replaced with 
different scenes. Follow the on-screen 
instructions and enter your four-digit password.
x[BD Parental Control]
Playback of some BD-ROMs can be limited 
according to the age of the users. Scenes may be 
blocked or replaced with different scenes. 
Follow the on-screen instructions and enter your 
four-digit password.
x[DVD Parental Control]
Playback of some DVD VIDEOs can be limited 
according to a predetermined level such as the 
age of the users. Scenes may be blocked or 
replaced with different scenes. Follow the on-
screen instructions and enter your four-digit 
password.
x[Internet Video Parental Control]
Playback of some Internet videos can be limited 
according to the age of the users. Scenes may be 
blocked or replaced with different scenes. 
Follow the on-screen instructions and enter your 
four-digit password.
x[Internet Video Unrated]
[Allow]: Allows the playback of unrated 
Internet videos.
[Block]: Blocks the playback of unrated Internet 
videos.
 
						

							56GB
[Music Settings]
You can make detailed settings for Super Audio 
CD playback.
x[Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD 
layer.
[CD]: Plays the CD layer.
x[Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]
: Plays the multi-channel area.
[System Settings]
You can make the system-related settings.
x[OSD]
You can select your language for the system on-
screen displays.
x[S-AIR Settings]
You can set up the S-AIR settings. For details, 
see “Using an S-AIR Product” (page 41).
[ID]: You can set the ID of the system.
[Pairing]: You can pair the system and S-AIR 
sub unit, such as a surround amplifier or S-AIR 
receiver.
[RF Change]: If wireless transmission is 
unstable, set this function.
[Mode]: You can enjoy the system’s sound in 
another room.
[Standby]: You can enjoy the S-AIR receiver 
while the unit is in standby mode.
x[Dimmer]
[Bright]: Bright lighting.
[Dark]: Low lighting.
x[HDMI Settings]
By connecting Sony components that are 
compatible with the Control for HDMI function 
with an HDMI cable, operation is simplified. 
For details, see “Using the Control for HDMI 
Function for “BRAVIA” Sync” (page 46).[Control for HDMI]
You can set the [Control for HDMI] function to 
on/off.
[On]
: On. You can operate mutually between 
components that are connected with an HDMI 
cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the 
system and TV that is compatible with the Audio 
Return Channel function.
[Auto]
: The system can receive the digital audio 
signal of the TV automatically via an HDMI 
cable.
[Off]: Off.
Note This function is available only when [Control for 
HDMI] is set to [On].
[Volume Limit]
When the System Audio Control (page 47) is 
activated, loud sound may be output depending 
on the volume level of the system. You can 
prevent this by limiting the maximum level of 
the volume when the System Audio Control 
function activates.
[Level3]: Maximum volume level is set to 10.
[Level2]: Maximum volume level is set to 15.
[Level1]: Maximum volume level is set to 20.
[Off]
: Off.
Note This function is available only when [Control for 
HDMI] is set to [On].
x[Quick Start Mode]
[On]: Shortens the startup time from standby 
mode. You can operate the system quickly after 
turning it on.
[Off]
: The default setting.
x[Auto Standby]
[On]: Turns on the [Auto Standby] function. 
When you do not operate the system for about 
30 minutes, the system enters standby mode 
automatically.
[Off]: Turns off the function.
 
						

							Settings and Adjustments
57GB
x[Auto Display]
[On]: Automatically displays information on the 
screen when changing the viewing titles, picture 
modes, audio signals, etc.
[Off]: Displays information only when you 
press
 DISPLAY.
x[Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x[Software Update Notification]
[On]: Sets the system to inform you of newer 
software version information (page 52).
[Off]: Off.
x[Gracenote Settings]
[Auto]: Automatically downloads disc 
information when you stop playback of the disc. 
To download, the system must be connected to 
the network.
[Manual]: Downloads disc information when 
you select [Playback History] or [Information 
Display] in the options menu.
x[DivX® VOD]
You can display the registration or 
deregistration code for this system, or deregister 
this system after registration.
When the registration is disabled
[Registration Code]: The registration code is 
displayed.
[Deregistration Code]: The deregistration code 
is displayed. (This item can be selected only 
after the registration code is displayed.)
When the registration is enabled
Press C/c to select [OK] or [Cancel], then 
press .
[OK]: The device is deregistered and the 
deregistration code is displayed.
[Cancel]: The system returns to the previous 
display.
For more information, go to 
http://www.divx.com
 on the Internet.
x[System Information]
You can display the system’s software version 
information and the MAC address.
[Network Settings]
You can make detailed settings for Internet and 
network.
x[Internet Settings]
Connect the system to the network beforehand. 
For details, see “Connecting to the network” 
(page 24).
[View Network Status]: Displays the current 
network status.
[Wired Setup]
: Select this when you connect to 
a broadband router directly.
[USB Wireless Setup]: Select this when you use 
a USB Wireless LAN Adapter.
For more information, go to
For customers in Europe and Russia
http://support.sony-europe.com/
For customers in Asia and Australia
http://www.sony-asia.com/support
x[Network Connection Diagnostics]
You can run the network diagnostic to check if 
the network connection has been made properly.
x[Connection Server Settings]
Sets whether or not to display the connected 
DLNA server.
x[Renderer Set-up]
[Automatic Access Permission]: Sets whether or 
not to allow automatic access from newly 
detected DLNA controller.
[Smart Select]: Allows a Sony DLNA controller 
to find the system as the target component to 
operate by using the infrared ray. You can set 
this function to on or off.
 
						

							58GB
[Renderer Name]: Displays the system’s name 
as it is listed on other DLNA devices on the 
network.
x[Renderer Access Control]
Sets whether or not to accept commands from 
DLNA controllers.
x[Party Auto Start]
[On]: Starts a party or joins an existing party at 
the request of a networked device compatible 
with the PARTY STREAMING function.
[Off]: Off.
x[BD Remote Device Registration]
Registers your “BD remote” device.
x[Registered BD Remote Devices]
Displays a list of your registered “BD remote” 
devices.
[Easy Setup]
Re-runs the Easy Setup to make the basic 
settings. Follow the on-screen instructions.
[Resetting]
x[Reset to Factory Default Settings]
You can reset the system settings to the factory 
default by selecting the group of settings. All the 
settings within the group will be reset.
x[Initialize Personal Information]
You can erase your personal information stored 
in the system.
 
						

							Additional Information
59GB
Precautions
On safety
 To prevent fire or shock hazard, do not place objects 
filled with liquids, such as vases, on the system, or 
place the system near water, such as near a bathtub or 
shower room. Should any solid object or liquid fall 
into the cabinet, unplug the system and have it 
checked by qualified personnel before operating it 
any further.
 Do not touch the AC power cord (mains lead) with 
wet hands. Doing so may cause an electric shock.
On power sources
 Unplug the unit from the wall outlet (mains) if you do 
not intend to use it for an extended period of time. To 
disconnect the cord, pull it out by the plug, never by 
the cord.
On placement
 Place the system in a location with adequate 
ventilation to prevent heat build-up in the system.
 At high volume, over long periods of time, the cabinet 
becomes hot to the touch. This is not a malfunction. 
However, touching the cabinet should be avoided. Do 
not place the system in a confined space where 
ventilation is poor as this may cause overheating.
 Do not block the ventilation slots by putting anything 
on the system. The system is equipped with a high 
power amplifier. If the ventilation slots are blocked, 
the system can overheat and malfunction.
 Do not place the system on surfaces (rugs, blankets, 
etc.) or near materials (curtains, draperies) that may 
block the ventilation slots.
 Do not install the system in a confined space, such as 
a bookshelf or similar unit.
 Do not install the system near heat sources such as 
radiators, air ducts, or in a place subject to direct 
sunlight, excessive dust, mechanical vibration, or 
shock.
 Do not install the system in an inclined position. It is 
designed to be operated in a horizontal position only.
 Keep the system and discs away from components 
with strong magnets, such as microwave ovens, or 
large loudspeakers.
 Do not place heavy objects on the system.
On operation
 If the system is brought directly from a cold to a warm 
location, or is placed in a very damp room, moisture 
may condense on the lenses inside the unit. Should 
this occur, the system may not operate properly. In 
this case, remove the disc and leave the system turned 
on for about half an hour until the moisture 
evaporates.
 When you move the system, take out any disc. If you 
do not, the disc may be damaged.
 If anything falls into the cabinet, unplug the unit and 
have it checked by qualified personnel before 
operating it any further.
On adjusting volume
 Do not turn up the volume while listening to a section 
with very low level inputs or no audio signals. If you 
do, the speakers may be damaged when a peak level 
section is suddenly played.
On cleaning
 Clean the cabinet, panel, and controls with a soft cloth 
slightly moistened with a mild detergent solution. Do 
not use any type of abrasive pad, scouring powder or 
solvent such as alcohol or benzine.
If you have any questions or problems concerning 
your system, please consult your nearest Sony dealer.
On cleaning discs, disc/lens 
cleaners
• Do not use cleaning discs or disc/lens cleaners 
(including wet or spray types). These may cause 
the apparatus to malfunction.
On replacement of parts
 In the events that this system is repaired, repaired 
parts may be collected for reuse or recycling 
purposes.
On your TV’s color
 If the speakers should cause the TV screen to have 
color irregularity, turn off the TV then turn it on after 
15 to 30 minutes. If color irregularity should persist, 
place the speakers further away from the TV set.
Additional Information
IMPORTANT NOTICECaution: This system is capable of holding a still 
video image or on-screen display image on your 
television screen indefinitely. If you leave the still 
video image or on-screen display image displayed 
on your TV for an extended period of time you risk 
permanent damage to your television screen. 
Projection televisions are especially susceptible to 
this.
 
						

							60GB
On moving the system
 Before moving the system, make sure that there is no 
disc inserted, and remove the AC power cord (mains 
lead) from the wall outlet (mains).Notes about the Discs
On handling discs
 To keep the disc clean, handle the disc by its 
edge. Do not touch the surface.
 Do not stick paper or tape on the disc.
 Do not expose the disc to direct sunlight or 
heat sources such as hot air ducts, or leave it in 
a car parked in direct sunlight as the 
temperature may rise considerably inside the 
car.
 After playing, store the disc in its case.
On cleaning
 Before playing, clean the disc with a cleaning 
cloth.
Wipe the disc from the center out.
 Do not use solvents such as benzine, thinner, 
commercially available cleaners, or anti-static 
spray intended for vinyl LPs.
This system can only play a standard circular 
disc. Using neither standard nor circular discs 
(e.g., card, heart, or star shape) may cause a 
malfunction.
Do not use a disc that has a commercially 
available accessory attached, such as a label or 
ring.