Sony DPP FP85 User Manual

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\040C02.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
11 GB
Preparations
3Close the paper tray cover.
4Open the slide cover.
5Insert the paper tray into the printer.
Notes
 You can set up to 20 sheets of print paper. Riffle 
the print paper thoroughly. Insert the print paper 
with the protective sheet facing up. Then remove 
the protective sheet.
 Insert the print paper with its printing surface (the 
side with no imprint) facing up.
 Do not touch the printing surface. Fingerprints or 
contamination on the printing surface may result in 
imperfect printing.
 Do not bend the print paper, or cut the print paper 
from the perforations before printing. To avoid paper jam or malfunctions of the printer, 
make sure of the following before printing:
– Do not write or type on the print paper.
– Do not attach a sticker or stamps on the print 
paper.
– When adding print paper to the paper tray, be 
sure that the total number of print paper sheets 
does not exceed 20 sheets.
– Do not insert different types of print paper 
together into the paper tray.
– Do not print on used print paper. Printing an 
image twice on the same paper will not make 
the printed image thicker.
– Use the print paper for this printer only.
– Do not use print paper ejected without printing.
Notes on storing the print paper
 To store print paper in the tray, remove the paper 
tray from the printer and close the slide door of the 
paper tray.
 Avoid storing the paper with the printed faces 
touching each other or in contact with rubber or 
plastic products, including vinyl chloride or 
plasticizer for an extended period of time; color 
changes or deterioration of the printed image may 
occur.
 Avoid placing the print paper in a location subject 
to high temperatures, high humidity, excessive 
dust or direct sunlight.
 When you are going to store partially-used print 
paper, store it in its original bag or a similar 
container.
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\040C02.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
12 GB
Connecting to the AC 
power source
1Insert the plug of the AC adaptor 
into the DC IN 24 V jack on the back 
of the printer.
2Connect one plug of the AC power 
cord to the connector of the AC 
adaptor and the other plug to the 
wall outlet.
Notes
 Do not place the printer in an unstable location 
such as on a wobbly table.
 Leave enough room around the printer. The print 
paper emerges from the back a few times during 
printing. Keep 10 cm (13/32 inches) or more space 
at the rear of the printer.
 Connect the AC adaptor to an easily accessible 
wall outlet close by. If trouble occurs while using 
the adaptor, immediately shut off the power by 
disconnecting the plug from the wall outlet.
 Do not short the plug of the AC adaptor with a 
metallic object, as this may cause a malfunction.
 Do not use the AC adaptor placed in a narrow 
space, such as between a wall and furniture.
 When you have finished using the AC adaptor, 
disconnect the AC power cord from the 
DC IN 24 V jack of the printer and from the AC 
power sources.
 The printer is not disconnected from the AC power 
source (mains) as long as it is connected to the wall 
outlet, even if the printer itself has been turned off.
To use your Printer abroad - 
Power sources
You can use your Printer and the AC Adaptor 
(supplied) in any country or region where the 
power supply is within 100 V to 240 V AC, 
50/60 Hz. Use a commercially available AC 
plug adaptor [a], if necessary, depending on the 
wall outlet (wall socket) [b].
Do not use an electronics transformer (travel 
converter), as this may cause a malfunction.
AC adaptor
AC power cordTo the wall 
outlet 10 cm
(13/32
inches)
AC-S2422
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
13 GB
Direct printing
                                                                                                                                                                                                                                                                                                                                                                                                                                                                      
Direct printing
LCD screen display
You can change the image preview view by 
setting the “On-screen Display” from the 
Display/Printer setup menu. 
To display a different image, press g/G.
AInput/setting indicationsInput indications and settings information for 
an image are displayed.
BNumber of selected images/Total 
number of images
CInk ribbon indication
P: P size
C: Cleaning cartridge
An image preview view
On-screen Display: On
On-screen Display: Off
On-screen Display: DetailsIcons Meaning
“Memory Stick” input
CompactFlash card input
SD Card input
xD-Picture Card input
External Device input
Protect indication
DPOF print preset indication
Associated file indication 
(Displayed when there is an 
associated file such as a motion 
file or a miniature e-mail image 
file.)
Indicates Date Print “On.”
Indicates Date Print (Date/Time) 
“On.”
Indicates “Pattern 1” (Borders).
Indicates “Pattern 2” (Borders).
Indicates Pages Per Sheet 4 “On.”
Indicates Pages Per Sheet 9 “On.”
Indicates Pages Per Sheet 16 
“On.”
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
14 GB
DImage number (folder-file 
number)*
(*DCF-compatible files only. In the case of 
other file formats, only part of the file name 
will be displayed.)
EOperation tips
FShot or saved date (*month/day/
year)
GPrint quantity setting
HDetailed information display
Displays a list of the images contained on the 
selected medium (Index View). You can switch 
the index view by selecting “by Filename” or 
“by date” on the Index View menu.
Index View “by Filename” 
The images are listed in the order of their file 
names.Index View “by date”
The images are listed by their shot or saved 
date.
ACursor (orange frame)You can move the cursor (selection) by 
pressing g/G/f/F.
BPrint quantity setting
COperation tips
DScroll bar
Indicates the location of the image among the 
total number of images.
EShooting date (*month, day, and 
year)
* Settings at the factory differ depending on 
the country or area you purchased the 
printer. 
When you start using the printer, please 
make setting for each item. You can change 
the order of month, day, and year (page 42).
Note
When the number of images exceeds 2,000, the 
images cannot be displayed by date. They are 
displayed by file names. 
Index View
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
15 GB
Direct printing
Basic printing
With the label side facing up, insert a 
memory card (“Memory Stick,” “Memory 
Stick Duo,” CompactFlash card, SD Card or an 
xD-Picture Card) that contains the images for 
printing into the proper slot until firmly into 
place. For the types of memory cards you can 
use with the printer, please see pages 80 to 82.
With the label side facing up (xD-Picture Card, 
SD Card, CompactFlash card, or “Memory Stick”  
(“Memory Stick Duo”) from the left)
To eject a memory card
Remove the memory card from the slot slowly 
in the reverse direction it was inserted.
Switching the image preview 
view and index view
You can switch the display as follows:
 To display the index view
In an image preview view, press   
(Index View)/  (Reduce).
When an image is enlarged, press   
repeatedly. An image is reduced to its 
original scale and then the index view is 
displayed.
 To display an image preview view
In the index view, press g/G/f/F to move 
the cursor to the desired image and press 
ENTER or   (Enlarge). The display 
changes from the index view to an image 
preview view.
 To enlarge an image
In an image preview view, press   
(Enlarge) repeatedly. The image is 
enlarged up to 5 times the original scale.
Inserting a memory card
Access indicator
Continued
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
16 GB
Notes
 Insert only the memory card that you want to use 
for printing. When multiple memory cards are 
inserted, the memory card inserted first will have 
the first priority. 
 The printer supports both standard and small sizes. 
A Memory Stick Duo adaptor is not necessary.
 The SD Card/xD-Picture Card slot automatically 
detects card type.
 To use a memory card, follow the steps described 
on pages 80 to 82.
This section explains how to display the images 
of a memory card or an external device on the 
printer’s LCD screen and print the selected 
images (direct printing). For how to print from 
an external device, see page 46.
1Press 1 (on/standby) to turn on the 
printer.
The standby indicator of the printer lights 
in yellow green. An image stored on the 
memory card or external device is 
displayed on the LCD screen.
2Press g/G to display the image that 
you want to print.
3Set the print quantity.
To print one sheet of the displayed image, 
skip this procedure and go on to the next 
step.
Press ENTER to display the print quantity 
indication. Then press f/F to specify the 
number of copies and press ENTER.
4Press PRINT.
While the PRINT button lights in green, 
the printer is ready for printing. All the 
images with print quantity settings are 
printed. 
To print multiple images
Repeat steps 2 and 3.
To change the print quantity 
Display the image whose print quantity 
you want to change, and press ENTER to 
display the print quantity indication. Then 
press f/F to set the print quantity and 
then press ENTER. 
If you select “0,” printing is canceled.
Enlarging an image to be 
printed (Trimming Print)
Press   (Enlarge). You can enlarge an image 
up to the 5 times the original scale. 
Press PRINT, so that the print preview is 
displayed. Press PRINT again to print the 
image preview view.
To resume the original size, press   (Reduce).
Notes
 Never move or turn off the printer while it is 
printing; the ink ribbon may become stuck or paper 
jam may occur. In case you turn off the power, 
keep the paper tray inserted and turn on the printer. 
After the paper is ejected, resume printing. 
 Do not remove the paper tray during printing. 
Otherwise, malfunction may occur.
 The print paper emerges a few times during 
printing. Do not touch nor pull the emerged paper.
  If print paper is jammed, see page 77.
Printing selected images
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
17 GB
Direct printing
On built-in images
If you press  ENTER while nothing is 
connected to the printer, the images contained 
in the printer are displayed. You can print or 
adjust the built-in images.
On selecting input
The printer is not equipped with the input select 
switch. When you connect a memory card or an 
external device with the printer, the images of 
the connected media are displayed 
automatically. If multiple memory cards or an 
external device are connected, the media first 
connected has the priority.
When you turn on the printer with multiple 
media being inserted or connected, the printer 
detects the media in the order of “Memory 
Stick,” CompactFlash card, SD Card, xD-
Picture Card, and external device connected to 
PictBridge/EXT INTERFACE connector.
On demonstration mode
After five seconds elapse with no memory card 
or external device connected, the printer enters 
into  the demonstration mode.
Pressing a button, or connecting a memory card 
or external device terminates the demonstration 
mode.
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
18 GB
Enjoying various printing
You can adjust the size, position, hue or other picture property of the selected image. 
Operation using the printer 
buttonsAUTO TOUCH-UP adjustment 
.page 20
In addition to the Auto Fine Print5 
automatic adjustment, the following 
adjustments are performed:
 Skin Smoothing
 Exposure Correction (using face 
detection feature)
 Focus Correction
 Red-eye Correction
You can use AUTO TOUCH-UP adjustment 
during Edit or CreativePrint menu 
operations. 
 Press g/G to select a desired item, 
and then press ENTER.
 To exit the menu, press MENU again.
AUTO TOUCH-UP
Press MENU.
1 Edit  .page 21
Items Procedures
 /  Increases or reduces the size of an 
image. 
Moves an image.
Rotates an image.
Adjusts the picture quality of an 
image.
Adds an filter to an image.
Reduces the red-eye phenomenon.
Undoes the editing just done and 
resets the image to the status 
before editing.
Saves the edited image.
Pressing the AUTO TOUCH-UP 
button adjusts exposure, focus, 
red-eye and other corrections 
automatically.
Prints an edited image.
Exits the Edit menu. Items Procedures
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
19 GB
Direct printing
You can create a Calendar, ID Photo, or other various printouts.
2 CreativePrint  .page 26
Scrapbook Calendar Superimpose
Frame Layout Print ID Photo
3  Batch Print  .page 33
You can enjoy batch print such as 
“Index Print,” “DPOF Print,“ and “Print 
All.”
Index Print
4 Slideshow  .page 34
You can perform a slideshow of the images saved in a memory 
card or an external device. You can also perform a slideshow 
of the “CreativePrint” prints.
5  Print setup 6 Display/Printer setup 
.page 38.page 41
7   File operation  .page 35
 Copying images between memory cards
 Deleting an image
 Formatting a “Memory Stick”
Downloaded From ManualsPrinter.com Manuals 
						

							D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
20 GB
Correcting a failed 
photo automatically 
(AUTO TOUCH-UP)
1Select the image that you want to 
adjust and then press AUTO 
TOUCH-UP.
Adjustment of the selected image starts. 
The adjustment results will be displayed 
on the screen. When a human face is 
detected, the face is displayed with a 
frame as the adjustments proceed.
To check the adjustment result 
more clearly:
Press   to enlarge the image. (The image 
will not be enlarged when printed.)
To display the original image 
(before adjustments) again
Press AUTO TOUCH-UP. To display the 
adjusted image, press AUTO TOUCH-UP 
again.
If you have set a print quantity for 
multiple images
All the images with print quantity settings 
are adjusted. To display other images, 
press g/G.
To change the print quantity 
Press ENTER to display the print quantity 
indication. Then press f/F to set the print 
quantity and then press ENTER. 
2Press PRINT.
Printing of the selected image(s) starts.
Tip
Adjustment takes effect only on the image being 
printed. The original image will not be adjusted.
Notes
 After the AUTO TOUCH-UP adjustment, you 
cannot make a trimming print of an image that has 
been enlarged by pressing  .
 Depending on the image, a face may not be 
automatically detected. If the brightness of the face 
is not adjusted properly, select “Adjust” from the 
Edit menu to adjust the brightness manually 
(page 22).
 Depending on the image, the out-of-focus 
phenomenon may not be corrected. In this case, 
use the “Sharpness” function from Adjust in the 
Edit menu to adjust the sharpness manually 
(page 22).
 Out-of-focus reduction does not take effect on blur 
caused by shaking of the camera.
 Depending on the image, the red-eye phenomenon 
may not be corrected. In this case, perform red-eye 
correction to make red-eye adjustments manually 
(page 24).
The automatic red-eye 
correction function of this 
printer uses the technology of 
FotoNation Inc. in the U.S.A.
The “Skin Smoothing” correction function of 
the printer uses the technology of Ichikawa 
Soft Laboratory.
Downloaded From ManualsPrinter.com Manuals