Sony F 35 User Manual

51Viewing and Setting the Viewfinder Displays
  Chapter 3   Basic Adjustments and Settings3-6-4 Viewing the FUNCTION 
(Format/Switch Function) Display
If you press the CANCEL/STATUS button with the 
ABNORMAL< ! > display on the screen, the display 
changes to the following FUNCTION display:
aFormat indication
The current video format is displayed.
For details on the formats, see “3-13 Detailed Setting of 
the Video Format” (page 61).
bAssignable switch indication
The functions assigned to the assignable...

52Viewing and Setting the Viewfinder Displays
  Chapter 3   Basic Adjustments and Settings
The CHAR/MARK LEVEL line permits you to adjust the 
brightness (0 to 50) of the character and marker 
indications.
Specifying the markers to be displayed
For the outputs for the total marker indication is activated 
on the  page, select and adjust the 
marker(s) to be displayed on the next  page.
 page
All the markers have been set to OFF at the factory.
3-6-6 Adjusting the Viewfinder 
Details
You can adjust the...

53Viewing and Setting the Viewfinder Displays
  Chapter 3   Basic Adjustments and Settings
 page
1) These items can also be set on the  page.
3-6-8 Setting the Cursor Indication
You can display a cursor on the viewfinder and monitor 
screen.
Example: Box cursor
Activating/deactivating the cursor 
indication 
The  page of the USER 
(OPERATION) menu permits you to activate/deactivate 
the cursor indication for each output.  page
The CURSOR indication is deactivated for all the outputs 
at the factory....

54Detailed Settings of the Switch Functions
  Chapter 3   Basic Adjustments and Settings
3-6-9 Checking the Power Voltage
The settings of the NEAR END and END values to warn 
of low voltage of a power supply can be checked on the 
 page of the USER (OPERATION) 
menu.
 page
This page is intended for display only. You can only switch 
the type. If you want to change the values, use the  page of the MAINTENANCE menu.
3-7 Detailed Settings of 
the Switch Functions
By using the  page of the USER 
(OPERATION)...

55Setting the Gain
  Chapter 3   Basic Adjustments and Settings
Setting subpage for assignable switch 4
Position the pointer to the function to be assigned and push 
on the MENU SEL/ENTER dial.
Setting the operation mode of the MENU 
SEL/ENTER dial
You can reverse the operation corresponding to the 
directions of rotation of the MENU SEL/ENTER dial on 
the camera head and that on the assistant panel.
3-8 Setting the Gain
If the gain of the video amplifier of this camera is to be 
switched using the gain...

56Detailed Shutter Settings
  Chapter 3   Basic Adjustments and Settings
3-9 Detailed Shutter 
Settings
The Electronic Shutter function of this camera enables 
shooting with various shutter angles and shutter speeds 
(sec). 
While the basic settings of the shutter can be made on the 
subdisplay, the  page of the USER 
(PAINT) menu permits you to set the shutter while 
observing the shutter angle, the shutter speed (sec), and the 
frame rates at a glance.
 page
SHUTTER
To activate the electronic shutter,...

57Resuming the Standard Conditions
  Chapter 3   Basic Adjustments and Settings
function (see page 62) is limited. With COMP MODE 
set to OFF or ANGLE, frame frequencies of 8 FPS or 
less are not available to minimize picture degradation. 
Usage under FPS will increase noise on the picture.
To lift this limitation, change the FPS LIMITER setting 
on the  page of the MAINTENANCE 
menu from LIMIT to FREE.
If the setting is changed from FREE to LIMIT, COMP 
MODE will be forcibly set to OFF.
3-10 Resuming...

58Selecting the Gamma
  Chapter 3   Basic Adjustments and Settings
3-11 Selecting the 
Gamma
You can use User gamma you create in addition to the 
built-in Standard gamma and Hyper gamma.
Use the  page of the USER (PAINT) menu for 
gamma operations.
 page
Gamma selection is also possible on the gamma-table 
selection page of the subdisplay.
3-11-1 Using the Standard Gamma
Standard Gamma is for video and intended to be used 
mainly for creating broadcast contents. It is used in 
combination with the Knee...

59Selecting the Gamma
  Chapter 3   Basic Adjustments and Settings
2Observing the output video level for a gray card of 
18% reflection rate on a waveform monitor, adjust the 
iris so that the level becomes equal to that shown in the 
“Video output with 18% gray card” column of the 
“Available Hyper Gamma choices” table. (The iris 
setting in this condition is the standard iris setting for 
the selected hyper gamma.) When the camera is in Custom mode (see page 30), 
white clip level adjustment is...

60Selecting the Gamma / Selecting the Gamma
  Chapter 3   Basic Adjustments and Settings
3-11-3 Using the S-LOG
When SPECIAL is selected on the first line of TABLE on 
the  page, the second line indicates S-LOG 
(Sony Log). 
Sony Log (S-LOG in subsequent texts) is a gamma which 
assumes use in the DI workflow (capturing filmed negative 
images and creating a digital master through digital 
processing for screening) in cinema production.
S-LOG enables you to monitor the latitude close to 
negative film...