Sony F 35 User Manual

61Inverting the Camera Picture / Detailed Setting of the Video Format
  Chapter 3   Basic Adjustments and Settings
3-12 Inverting the 
Camera Picture
The image-inversion function allows you to cancel the 
image inversion phenomena that occurs when a cine-lens 
converter is used.
Use the  page on the USER 
(MAINTENANCE) menu to access to this function.
 page
Set IMAGE INVERT to ON to activate the image-
inversion function. The upside of the picture comes down, 
swapping the right and left.
3-13 Detailed...

62Detailed Setting of the Video Format
  Chapter 3   Basic Adjustments and Settings
on the TOP MENU screen and call up the  page.
For details on menu operations, see “4-2 Basic Menu 
Operations” (page 64).
 page of MAINTENANCE 
menu
CURRENT
The current format is displayed.
Specify the desired format, using the lines under NEXT.  
SCAN
Select the scan mode: PROGRESSIVE or INTERLACE.
FRAME (FIELD)
Select the frame rate.
In INTERLACE mode, the item changes to FIELD, 
permitting you to select either 59.94 or...

63
  Chapter 4   Menu Configuration and Detailed Settings
Chapter
Menu Configuration
4
Menu Configuration and 
Detailed Settings
4-1 Menu Configuration
In addition to the subdisplay pages, the menus displayed 
on the viewfinder enable various detailed settings of the 
camera.
The available menus are:
USER menu
This menu can include menu pages selected from among 
the OPERATION, PAINT, MAINTENANCE, 
NETWORK, FILE, and DIAGNOSIS menus, for your 
convenience. Changing, adding, and deleting pages can be...

64Basic Menu Operations
  Chapter 4   Menu Configuration and Detailed Settings
For the pages and included items of the MAINTENANCE 
menu, see “4-3-3 MAINTENANCE Menu” (page 84). 
NETWORK menu
This menu is for enabling the camera to be operated from 
a distance via a network cable, e.g., using the MSU-900/
950 Master Setup Unit.
For the pages and included items of the NETWORK menu, 
see “4-3-4 NETWORK Menu” (page 90).
For the settings to use the MSU-900/950, see “Using the 
MSU-900/950” (page 110).
FILE...

65Basic Menu Operations
  Chapter 4   Menu Configuration and Detailed Settings
For settings on the subdisplay, see“3-2 Basic Settings with 
the Subdisplay” (page 32).
4-2-1 Displaying Setting Pages
Press the VF MENU/DISPLAYbutton.
The last operated menu page is displayed. (If this is your 
first menu operation, the CONTENTS page of the USER 
menu is displayed.)
The pointer on the menu screen is B in Cine mode and c 
in Custom mode.
Selecting menu pages from the TOP MENU 
screen
If you press the VF...

66Basic Menu Operations
  Chapter 4   Menu Configuration and Detailed Settings
2Turn the MENU SEL/ENTER dial to flip through the 
pages.
3When the desired page is displayed, push on the 
MENU SEL/ENTER dial.
The “?” symbol will change back to the pointer (c or 
B), and operations with the displayed page will be 
enabled.
4-2-2 Setting the Menu Items
If a “?” symbol is flashing at the left of the page number, 
push on the MENU SEL/ENTER dial to change it to the 
pointer (c or B). Making settings on the...

67Basic Menu Operations
  Chapter 4   Menu Configuration and Detailed Settings
Mac OS X 10.5
Applicable browser
Internet Explorer 6 or 7
Firefox 3
Safai 3
Displaying the menus
1Set an IP address at HOST IP ADDRESS on the  page of the NETWORK menu (e.g.: 
192.168.0.1).
2Connect a PC to the camera via a hub or directly using 
a cross cable.
3Start up the Web browser on the PC and enter http:// 
then the IP address you set on the  
page (e.g.: http://192.168.0.1).
The following menu display will appear:...

68Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-3 Menu List
This section shows the menus to be displayed on the 
viewfinder in tables.
 For the pages that have been registered in the USER 
menu at the factory, the USER menu page numbers are 
indicated in parentheses in the No. column of the tables. A CONTENTS page (numbered 00) is also provided for 
each menu.
4-3-1 OPERATION Menu
The OPERATION menu items can be set in both Cine and Custom modes.
Execute by ENTER. : Execute by...

69Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Setting the 
ABNORMAL < ! > 
display02
(U02)ND[IND] ONON, OFF[IND]: Set whether to be 
included in the ‘!’ 
indications on the 
ABNORMAL < ! > display
[NORMAL]: Specify the 
conditions under which the 
‘!’ indication is not to be 
displayed even if [IND] is 
ON. (By specifying the 
standard or normal 
conditions here, non-
standard or abnormal 
conditions can be found 
with the ‘!’ indication.)
e.g.: With the default setting of 
ND, the...

70Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Specifying markers04
(U03)CENTEROFFON, OFF
11, 2, 3, 41: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
SAFETYOFFON, OFF
90.0%80.0%, 90.0%, 92.5%, 
95.0%
EFFECTIVEOFFON, OFF
ASPECTOFFON, OFF
4:32.40:1, 2.35:1, 1.85:1, 
1.66:1, 16:9, 15:9, 14:9, 
13:9, 4:3, VAR H, VAR V1.66:1 : VISTA1 equivalent
1.85:1 : VISTA2 equivalent
VARIABLE144012 to 1920
101612 to 1080
SAFETYOFFON, OFFFor the safety marker in 
Aspect mode...