Sony F65 Manual

							
51VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-2 VF/SDI Menu
PageConfiguration 
itemDefaultSettingsRemarks

SDI1 look 
settings Select Look Profile ACES-Proxy10, Graded 
ACES, Look Profile, 
S-Log2/S-Gamut, Color/LUTSets the look type of the video output 
image on the SDI OUT1 connector.
ACES-Proxy10: Outputs an image with 
applied 10-bit approximation of a log 
curve specified by ACES (Academy 
Color Encoding Specification).
Graded ACES: Outputs ACES-Proxy10  images with RRT and ODT (Gamma 
2.4) applied. 
Look Profile: Selects the look, using a  look number, for the output of images 
suitable as the starting point for color 
grading or images close to print film.
S-Log2/S-Gamut: Outputs images in 
S-Log2 or S-Gamut. 
Color/LUT: Outputs images with the  specified Color and LUT settings. 
Look Profile # 1 1 to 4 Displays the selected look profile  number. 
Look 1 1 to 4 Refer to the “Look Profile White Paper”  issued separately (pending).
Color S-Gamut S-Gamut, F900, ITU-R  BT.709Sets the color reproduction of the video 
output image on the SDI OUT1 
connector. 
S-Gamut: Wide color space comparable 
to film cameras.
F900: Color space equivalent to  conventional cameras.
ITU-R BT.709: Color space equivalent to 
ITU-R BT.709.
LUT S-Log2 709(800%), S-Log2,  HG8009G40, HG8009G33, 
[User1], [User2], [User3], 
[User4], [User5] to [User100]Selects the LUT for the video output on 
the SDI OUT1 connector. 
709(800%): Signal extending the 
dynamic range up to 800% based on 
ITU-R709. 
S-Log2: Non-adjustable signal for  required post-production processing. 
Up to 1300% input light level can be 
reproduced. 
HG8009G40: Signal using hypergamma  with 800% dynamic range, 109% 
white limit, and 40% video output for 
18% gray card. 
HG8009G33: Signal using hypergamma 
with 800% dynamic range, 109% 
white limit, and 33% video output for 
18% gray card. 
[User1] to [User100]: Imported, user-
defined LUT signals.
 a)
ASC CDL Off On, Off Sets whether to apply an ASC CDL.
CDL New CDL New CDL, [User1], [User2],  [User3], [User4], [User5] to 
[User100], Edit Mode[User1] to [User100] is displayed only 
when there are imported CCC/CDL files. 
Edit Mode is displayed only when editing 
ASC CDL values. 
The ASC CDL can be modified from a 
web browser or tablet device.  
						

							
52VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

SDI1 ASC CDL 
settingsInputDescription -- -- Display only.
Displays the character string defined in 
the InputDescription tag of the CDL/CCC 
file. 
“Undefined” is displayed if the 
InputDescription tag is not present.
Slope Adjusts the individual R, G, B values of  the ASC CDL slope function.
Display only. Settings can be modified 
from a tablet device.
R 1.000  0.000 to 3.999
G 1.000  0.000 to 3.999
B 1.000  0.000 to 3.999
Offset -- -- Adjusts the individual R, G, B values of  the ASC CDL offset function.
Display only. Settings can be modified 
from a tablet device.
R 0.000 –1.000 to 0.999
G 0.000 –1.000 to 0.999
B 0.000 –1.000 to 0.999
Power -- -- Adjusts the individual R, G, B values of  the ASC CDL power function.
Display only. Settings can be modified 
from a tablet device.
R 1.000 0.700 to 1.200
G 1.000 0.700 to 1.200
B 1.000 0.700 to 1.200
Saturation 1.000 0.000 to 2.000 Adjusts the value of the ASC CDL  saturation function.
Display only. Settings can be modified 
from a tablet device.

SDI1 look 
memory 
settings 1 S-Log2/S-
Gamut, ASC 
CDL Off -- Saves SDI1 look settings and displays 
the set values. 
You can save up to 16 items on one 
page.
2 #1, ASC CDL 
Off
3 #2, ASC CDL  Off
4 #3, ASC CDL  Off
5 #4, ASC CDL  Off
Add -- Execute by Enter. Saves the current SDI1 look settings. 
Delete -- Execute by Enter. Deletes the selected saved settings.
Preset -- Execute by Enter. Deletes all settings.
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
53VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

SDI2 look 
settingsSelect Color/LUT S-Log2/S-Gamut, Color/LUT Sets the look type of the video output 
image on the SDI OUT2 connector. 
S-Log2/S-Gamut: Outputs images in S-
Log2 or S-Gamut. 
Color/LUT: Outputs images with the  specified Color and LUT settings. 
Color ITU-R BT.709 S-Gamut, F900,  ITU-R BT.709Sets the color reproduction of the video 
output image on the SDI OUT2 
connector. 
S-Gamut: Wide color space comparable 
to film cameras.
F900: Color space equivalent to 
conventional cameras.
ITU-R BT.709: Color space equivalent to  ITU-R BT.709.
LUT 709(800%) 709(800%), S-Log2,  HG8009G40, HG8009G33, 
[User1], [User2], [User3], 
[User4], [User5] to [User100]Selects the LUT for the video output on 
the SDI OUT2 connector. 
709(800%): Signal extending the 
dynamic range up to 800% based on 
ITU-R709. 
S-Log2: Non-adjustable signal for  required post-production processing. 
Up to 1300% input light level can be 
reproduced. 
HG8009G40: Signal using hypergamma 
with 800% dynamic range, 109% 
white limit, and 40% video output for 
18% gray card. 
HG8009G33: Signal using hypergamma  with 800% dynamic range, 109% 
white limit, and 33% video output for 
18% gray card. 
[User1] to [User100]: Imported, user- defined LUT signals. 
 Select SDI-OUT2 SDI-OUT1, SDI-OUT2 Switches the output source for the video 
signals output on the VF and HD-Y 
connectors. 

Output signal 
settings Effective Area 4096:2160 4096:2160, 3840:2160, 
Anamorphic Unsqueeze x2Selects the video for output (F65RAW, 
F65RAW-HFR only).
Color Color Color, R, G, B Selects the output RGB channels.
Scan Type (Over 
30p) Interlace Interlace, Frame Drop Selects whether to output video with 
reduced distortion of fast-moving 
subjects when Frame Rate is set to 50p 
or higher.
Image Invert 
Select Off Off, Vertical, Horizontal, 
Vertical & Horizontal Selects the type of image inversion.
Off: No image inversion
Vertical: Top to bottom
Horizontal: Left to right
Vertical & Horizontal: Top to bottom and 
left to right
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
54VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
a) When a User LUT is used, the signal level that is output on the SDI OUT1 connector is scaled to 100% level. 
4-2-3 Display Info Menu

Output signal 
settings for 
DV F - E L 1 0 0Color 0 –99 to 0 to +99 Adjusts the color saturation of the image. 
Contrast 0 –99 to 0 to +99 Adjusts the contrast of the image. 
Brightness 0 –99 to 0 to +99 Adjusts the brightness of the image. 
Peaking On On, Off Enables/disables the peaking function. 
Frequency High Normal, High Selects whether to use the standard or  high peaking frequency.
Level 50 0 to 99 Sets the peaking level.
Spare Assign Hi/Lo Key Off, Hi/Lo Key, Peaking, Mag  Position, Highlight Clip Ind.Assigns camera functions to the Spare 
button. 
PageConfiguration 
itemDefaultSettingsRemarks

Exposure 
assistant 
function settings Highlight Clip 
Indicator(SDI2)
On On, Off Applies false colors to areas of specific 
brightness. 

Status, marker 
display settings [Status/Menu] 
VF/HD-Y On On, Off Displays the status/menu in the 
viewfinder.
SDI-OUT1 On On, Off Displays the status/menu on the image  output on the SDI OUT1 connector.
SDI-OUT2 On On, Off Displays the status/menu on the image  output on the SDI OUT2 connector.
[Marker]  VF/HD-Y On On, Off Displays markers in the viewfinder.
SDI-OUT1 On On, Off Displays markers on the image output  on the SDI OUT1 connector.
SDI-OUT2 On On, Off Displays markers on the image output  on the SDI OUT2 connector.
Color White White, Yellow, Cyan,  Green, Magenta, Red, 
BlueSets the display color of markers.
Brightness 7 1 to 10 Adjusts the brightness of the marker  display.
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
55VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Status indicator 
display item 
settingsSystem Format Off On, Off Turns the signal format indicator On/Off. 
ND Filter Off On, Off Turns the ND filter indicator On/Off. 
Color Temperature Off On, Off Turns the color temperature indicator 
On/Off. 
EI/Master Gain Off On, Off Turns the EI value indicator On/Off. 
Shutter Off On, Off Turns the shutter operation status  indicator On/Off.
SDI1 Look Off On, Off Turns the SDI1 Look setting indicator  On/Off. 
SDI2 Look Off On, Off Turns the SDI2 Look setting indicator  On/Off. 
Camera Index/Reel Off On, Off Turns the Camera Index and reel  number indicator On/Off. 
Battery DC IN 12V Off On, Off Turns the 12 V supply voltage indicator  On/Off. 
Battery DC IN 24V Off On, Off Turns the 24V supply voltage indicator  On/Off. 
Media Remain Off On, Off Turns the media remaining indicator On/ Off. 
Time Code Off On, Off Turns the time code indicator On/Off. 
Message On On, Off Turns the message indicator On/Off. 
Highlight Clip 
Indicator On On, Off Turns the Highlight Clip Indicator 
function On/Off. 
Rec On On, Off Turns the recording indicator On/Off. 

Marker indicator 
display item 
settings Center Off On, Off Turns the center marker On/Off. 
Effective Off On, Off Turns the effective pixel area marker 
indicator On/Off. 
Aspect Ratio 2.39:1 2.39:1, 2.35:1, 1.90:1,  1.85:1, 1.78:1, 1.66:1, 
1.33:1, VariableSets the aspect ratio when Effective is 
set to On.
Displays “Variable (Width/Height:1)” ratio 
when Aspect Ratio is set to Variable. 
Width 960 960 to 1920 Specifies the width of the effective pixel  area when Aspect Ratio is set to 
Va r i a b l e .
Height 540 540 to 1080 Specifies the height of the effective pixel  area when Aspect Ratio is set to 
Va r i a b l e .  
Ratio (Variable) 1.78:1 “Width / Height:1” display
Mask Off On, Off Enables/disables darkening of image  outside the selected Aspect Marker. 
Level 2 0 to 4 Sets the darkness level of the image  outside the selected Aspect Marker.
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
56VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-4 Config Menu
PageConfiguration 
itemDefaultSettingsRemarks

ASSIGN button 
function 
assignment Assign 1 Mag Off, Mag, Mag Position, 
Hi/Lo Key, Fan Mode, 
Rec Review, Highlight Clip 
Ind., SRMemory EjectOff: No function is allocated. 
Mag: Displays a magnified image in the 
viewfinder and on the SDI OUT 
connectors. 
Each time the button is pressed, the 
magnification changes between 2-
times, 4-times, and Off. When the 
magnification is 2-times or 4-times, 
the ASSIGN button allocated with the 
Mag function is lit. 
Mag Position: Selects the position of the 
image that is magnified by the Mag 
function. 
Each time the button is pressed, the 
position moves from top left to 
bottom right. When the display is 
magnified, the ASSIGN button 
allocated with the Mag Position 
function is lit.
Hi/Lo Key: Temporarily changes LUT for 
checking the high-luminance 
brightness and low-luminance 
darkness of the image in the 
viewfinder and from the SDI OUT 
connectors. The button toggles 
between high-luminance check (gain 
reduction), low-luminance check 
(gain amplification), and normal.
Fan Mode: Switches the fan operating 
mode. For details on the fan 
operating mode, see  “3-3-9 Selecting 
the Fan Operating Mode” (page 32) . 
Rec Review: Plays the video just  recorded.
Highlight Clip Ind.: Indicates the blown- out areas of the image output on the 
SDI OUT2 connector or in the 
viewfinder in red.
SRMemory Eject: Closes the file and  unmounts the SRMemory card 
inserted in the SR-R4, then unlocks 
the lid of the SR-R4.
Bars: Outputs color bars.
Assign 2 Mag Position
Assign 3 Hi/Lo Key
Assign 4 Rec Review Off, Mag, Mag Position, 
Hi/Lo Key, Fan Mode, 
Rec Review, Highlight Clip 
Ind., SRMemory Eject, 
Bars 
						

							
57VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Slate information 
displayReel* -- 001 to 999 Displays information specified on the 
“Slate” page of the F65Remote Look 
Plus (excluding Reel, Camera Index, 
Shot). 
* For Reel, Camera Index, Shot: 
Displays information specified on the 
SR-R4.
The values for Reel and Camera Index 
only can be modified.
Scene -- --
Take -- --
Camera Index* -- A to Z
Cut -- --
Shot* -- --
Project -- --
Production -- --
Director Name -- --
Director of 
Photography Name
-- --
Description -- --
Next -- Execute by ENTER. Moves to next page. 
Back -- Execute by ENTER. Moves to previous page. 
Clear -- Cancel/OK Execute by ENTER.Clears the items (excluding Reel, 
Camera Index, Shot).

Fan operating 
mode select Fan Mode Auto2 Auto1, Auto2, Min, Max Auto1: Automatic control, according to 
the internal temperature.
Auto2: Automatic control, according to 
the internal temperature, and 
maintains quiet operation when 
recording. 
Min: Quiet mode, without  synchronization with recording (can 
be used at ambient temperatures of 
less than 30°C (86°F)).
Max: High-speed mode, fan rotates at  maximum speed.

Date/Time 
settings and 
accumulated ON 
time display Date -- mm/dd/yyyy Sets the current date.
Time -- hh:mm Sets the current time.
Date Type M/D/Y M/D/Y, M/D Selects the date display format. 
Hour Meter -- 0H to 99999H Displays the accumulated powered-ON 
time since reset from the Service menu.

Sync signal 
settings Genlock
Input Signal HD-Y HD-Y, HD-SDI Selects the input connector for the  external sync signal. The genlock signal 
must be reapplied after modifying this 
setting.
HD-Y: HD 3-level sync
HD-SDI: HD-SDI input
Status -- Locked, Not Locked,  No SignalDisplay only. Locked: Synchronized 
successfully.
Not Locked: Not synchronized.
No Signal: There is no input signal.
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
58VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-5 File Menu

Supply voltage 
settingsDC IN (24V) Type Type1 Type1, Type2 Selects the 24 V system supply settings.
Near End 22.2 V 20.5 V to 30.0 V Sets the power supply voltage drop  warning level for the 24 V supply.
End 21.6 V 20.0 V to 24.0 V Sets the power supply exhausted  warning level for the 24 V supply.
DC IN (12V) Type Type1 Type1, Type2 Selects the 12 V system supply settings.
Near End 11.1 V 11.0 V to 17.0 V Sets the power supply voltage drop  warning level for the 12 V supply.
End 10.8 V 10.5 V to 14.0 V Sets the power supply exhausted  warning level for the 12 V supply.
PageConfiguration 
itemDefaultSettingsRemarks
PageConfiguration 
itemDefaultSettingsRemarks

Gamma file 
settings 1 Sets the imported F65 gamma file (.gmd 
file name extension).
A preset value of 709(800%) gamma is 
stored in configuration item 1 as the 
default gamma value. A user gamma file 
can be imported, overwriting the preset 
value. This value is selected when 
Gamma File Preset is executed on the 
 page.
Importing a gamma file stores all gamma 
data within the camera and is user-
selectable.
Name 709(800%) (Up to 12 characters), --
Comment Preset entry
2 Name -- (Up to 12 characters), --
Comment --
3 Name -- (Up to 12 characters), --
Comment --
4
Name -- (Up to 12 characters), --
Comment --
5 Name -- (Up to 12 characters), --
Comment --
Import -- Execute  by  Enter. Imports an F65 gamma file with .gmd file  name extension (up to five) from USB 
flash memory or SD memory card.

LUT file display Data -- (Up to 12 characters) Displays the data name of the imported 
F65 LUT file (.ltd file name extension). 
File -- Displays the file name of the imported  F65 LUT file (.ltd file name extension).
Import Execute by Enter. Imports an F65 LUT file with .ltd file  name extension (up to 100).
Delete Execute by Enter. Deletes the selected file.  
						

							
59VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings

ASC CDL file 
displayData -- (Up to 17 characters) Displays information in the 
ColorCorrection id tag of the imported 
ASC CDL/CCC file. Displays the file 
name instead if there is no 
ColorCorrection id tag in the ASC CDL/
CCC file. 
File -- Displays the file name of the imported  ASC CDL/CCC file.
Import Execute by Enter. Up to 100 ASC CDL/CCC files can be  imported. 
Delete Execute by Enter. Deletes the selected file. 

Configuration file 
import/export Import -- Execute by Enter. Imports the settings of all menu 
parameters (excluding the following) 
from a configuration file.
 All Network menu items
  in the Config menu
 Gamma File, LUT File, and ASC CDL 
File in the File menu
Export -- Execute by Enter. Exports the settings of all menu  parameters (excluding the following) to a 
configuration file.
 All Network menu items
  in the Config menu
 Gamma File, LUT File, and ASC CDL  File in the File menu

Restore settings 
to factory default Gamma  File  Preset -- Execute  by  Enter. Deletes all gamma files, and restores the 
factory default setting.
LUT File Preset -- Execute by Enter. Deletes all LUT files, and restores the  factory default setting.
ASC CDL File 
Preset -- Execute by Enter. Deletes all ASC CDL files and restores 
the factory default settings.
All File Preset -- Execute by Enter. Restores all settings (excluding the  following) to the factory default values.
 All Network menu items
  in the Config menu
 Gamma File, LUT File, and ASC CDL  File in the File menu

Formatting 
media M.S./SD Format -- Execute by Enter. Initializes the media and creates folders 
for the F65.
PageConfiguration 
itemDefaultSettingsRemarks 
						

							
60VF Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-2-6 Network Menu
This menu is not displayed in web browsers or on tablet 
devices. 
PageConfiguration 
itemDefaultSettingsRemarks

IP address 
settings DHCP Disabled Enabled, Disabled Sets whether to automatically obtain an 
IP address from a DHCP server.
IP Address 192.168.1.1 0.0.0.0 to 255.255.255.255 If DHCP is enabled, displays the IP  address obtained from the DHCP server.
Subnet Mask 255.255.255.0 0.0.0.0 to 255.255.255.255
Default Gateway 0.0.0.0 0.0.0.0 to 255.255.255.255
Set -- Execute by Enter.

Wi-Fi settings Wi-Fi Disabled Enabled, Disabled Enables/disables the Wi-Fi settings. 
Enable for connection. 
Wi-Fi Status No connectivity Excellent, Good, Weak,  No connectivityDisplays the communication/connection 
status. 
SSID (Blank) (Blank), String of up to 32  charactersDisplays the network name.
Network Type -- Infra, ad-hoc Displays the network connection mode.
IP Address -- 0.0.0.0 to 255.255.255.255 Displays the value obtained from the  DHCP server. 
Subnet Mask -- 0.0.0.0 to 255.255.255.255
Default Gateway -- 0.0.0.0 to 255.255.255.255
Scan Network -- Execute by Enter. Scans the network access point. 
Connect Manually-- Execute by Enter. Used to enter the network access point. 
ad-hoc Setting -- Execute by Enter. Configures ad-hoc network mode.
SSID (Blank) (Blank), String of up to 32  charactersSets the network name. Displayed only 
when Scan Network is executed. 
Network Type Infra Infra, ad-hoc Displays the connection mode.
Authentication WPA2PSK Infra:  WPAPSK, WPA2PSK
ad-hoc:  OPEN, SHARED Sets the network authentication method. 
Displayed only when Scan Network is 
executed.
Encryption AES Infra:  TKIP, AES
ad-hoc:  WEP Sets the data encryption method. 
Displayed only when Scan Network is 
executed.
WEP Key Index 1 1, 2, 3, 4 Selects the WEP key index number  when using ad-hoc mode.
Input Select ASCII8-63 ASCII8-63, HEX64,  ASCII5, ASCII13, HEX10, 
HEX26Selects the network encryption key 
for mat.
ASCII8-63: 63 characters in 8-bit ASCII  for mat. 
HEX64: 64 digits in hexadecimal format.
ASCII5: 5 characters in ASCII format.
ASCII13: 13 characters in ASCII format.
HEX10: 10 digits in hexadecimal format.
HEX26: 26 digits in hexadecimal format.
ASCII5, ASCII13, HEX10, and HEX26  are valid only in ad-hoc mode.
Key (Blank) 63-character ASCII or 64- digit hexadecimalSets the network encryption key. 
Set -- Execute by Enter.