Sony Playstation 2 Instruction Manual

							3-214-730-22(1)
Instruction Manual
SCPH-79002
SCPH-79003
Before using this product, carefully read this manual and retain it for future reference. 
						

							2WARNING
To reduce the risk of fire or electric shock, do not expose this 
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place a container filled 
with liquids on top of the console.
To avoid electrical shock, do not open the cabinet. Refer 
servicing to qualified personnel only.
Caution
Use of controls or adjustments or performance of procedures 
other than those specified herein may result in hazardous 
radiation exposure. 
The use of optical instruments with this product will increase 
eye hazard. 
This appliance is classified as a CLASS 1 LASER product under IEC60825-1: 2001.
This equipment has been tested and found to comply with the 
limits set out in the EMC Directive using a connection cable 
shorter than 3 metres (9.8 feet).
Read carefully before operating your 
PlayStation
®2 console
A few people may experience epileptic seizures when viewing flashing lights or 
patterns in our daily environment. These persons may experience seizures while 
watching TV or playing video games, including DVD-Videos or games played on 
the PlayStation
®2 console. Players who have not had any seizures may nonetheless 
have an undetected epileptic condition. Consult your physician before operating the 
PlayStation
®2 console if you have an epileptic condition or experience any of the 
following symptoms while watching TV programs or playing video games: altered 
vision, muscle twitching, other involuntary movements, loss of awareness of your 
surroundings, mental confusion, and/or convulsions.
Some PlayStation
® or PlayStation®2 format software titles may perform differently 
on this console than they do on previous PlayStation®2 or PlayStation® consoles, or 
may not perform properly on this console. For more information, visit our Web site 
at www.playstation.com
NOTICE FOR CUSTOMERS IN THE UNITED KINGDOMA moulded plug complying with BS1363 is fitted to this equipment for your safety 
and convenience.
Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by 
ASTA or BSI to BS1362, (i.e., marked with   or   mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach 
the fuse cover after you change the fuse. Never use the plug without the fuse cover. 
If you should lose the fuse cover, please contact the appropriate PlayStation
® 
customer service helpline which can be found within every PlayStation® and 
PlayStation®2 format software manual.
The manufacturer of this product is Sony Computer Entertainment Inc., 2-6-21 
Minami-Aoyama, Minato-ku Tokyo, 107-0062 Japan. The Authorised 
Representative for EMC and product safety is Sony Deutschland GmbH, 
Hedelfinger Strasse 61, 70327 Stuttgart, Germany. Distributed in Europe by Sony 
Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 
7LP.
WARNING
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT 
						

							3Table of contents
WARNING .................................................................................... 2
Precautions ..................................................................................... 4
Preparation
Getting started ................................................................................ 7
Part names ...................................................................................... 8
Connecting to a TV ........................................................................ 9
Connecting digital audio equipment ............................................ 12
Connecting the controller ............................................................. 12
Connecting the AC adaptor and AC power cord ......................... 13
Turning the console on and off .................................................... 14
Games
Playing a game ............................................................................. 15
Using Memory Cards ................................................................... 18
Audio CDs
Playing an audio CD .................................................................... 20
DVDs
Watching a DVD.......................................................................... 22
Using the playback modes ........................................................... 26
Adjusting DVD player settings .................................................... 28
Main menu
Displaying the main menu ............................................................35
Using the Browser screen .............................................................35
Using the System Configuration menu.........................................36
Using the Version Information screen..........................................39
Networking
Connecting to a network...............................................................42
Creating network settings .............................................................44
Additional information
Compatible software.....................................................................45
Accessories ...................................................................................46
GUARANTEE..............................................................................47
Specifications ...............................................................................49
Troubleshooting............................................................................50
Table of contents 
						

							4Precautions
This product has been designed with the highest concern for safety. However, any 
electrical device, if used improperly, has the potential for causing fire, electrical 
shock or personal injury. To help ensure accident-free operation, follow these 
guidelines:
 Observe all warnings, precautions and instructions.
 Stop use and unplug the AC power cord from the electrical outlet immediately if 
the device functions in an abnormal manner or produces unusual sounds or smells.
 Contact the appropriate PlayStation
® customer service helpline which can be 
found within every PlayStation® and PlayStation®2 format software manual if the 
device does not operate properly.
Safety
 Do not remove the console exterior or disassemble the console. The laser beam 
emitted from the lens of this unit may be harmful to the eyes.
 Do not use the console near water.
 Keep the console and all connecting cords and cables out of the reach of children.
 Do not touch the plug of the AC power cord with wet hands.
 Do not touch the console or connected accessories during an electrical storm.
 Do not touch the console or AC adaptor for extended periods of time while the 
console is turned on as extended contact may cause low-temperature burns.
 Do not place the console and connected accessories on the floor or in a place where 
they may cause persons walking by to trip or stumble. 
 Adjust the settings of the DVD player according to the instructions provided before 
playing a DVD. If the settings are not correct, a loud sound may be emitted, 
possibly injuring your ears or damaging the speakers.
 Do not touch a disc while it is spinning as personal injury or damage to the disc 
may result.
 Do not close the disc cover in a way that could pinch your hand or fingers as 
personal injury or damage to the console may result.
Health
 Stop using the console immediately if you experience any of the following 
symptoms. If the condition persists, consult a doctor.
– Lightheadedness, nausea, or a sensation similar to motion sickness
– Tired, uncomfortable or aching hands or arms
– Tired, dry or aching eyes
 When operating the unit, play in a well-lit room and keep a safe distance from the 
TV screen.
 Avoid prolonged use of the console. Take a break of about 15 minutes during every 
hour of play.
 Do not use the console when you are tired or short of sleep.
 Listening to sound continuously for a long time with a high volume may adversely 
affect the ears. Be careful especially when using headphones. Adjust the volume 
so that surrounding sounds can be heard.
Use and handling
 Do not throw or drop the console or accessories, or expose them to strong physical 
shock.
 Do not place the console or accessories on surfaces that are unstable, tilted or 
subject to vibration.
 Do not expose the console or accessories to high temperatures, high humidity or 
direct sunlight (use in an environment where temperatures range from 5 °C to 
35 °C).
 Do not place the console or accessories in locations subject to sudden temperature 
change (for example, changes of 10 °C per hour or more).
 Do not leave the console or accessories in a car with its windows closed 
(particularly in summer).
 Do not place the console in locations of poor ventilation such as small, enclosed 
areas, directly against a wall or on a thick carpet or bedding.
 Do not expose the console to dust, smoke or steam. This can cause the console to 
malfunction.
 Do not allow liquid or small particles to get into the console.
 Do not put any objects on the console.
 Do not touch or insert foreign objects into the connectors of the console or 
accessories.
 Do not place the console close to magnetic fields produced by magnets or 
loudspeakers.
Precautions 
						

							5Precautions
 Do not set the console other than in the vertical or horizontal position. When 
placing in the vertical position, use the Vertical Stand (for PlayStation®2) (sold 
separately) that is compatible with this console. Also, do not change the position 
while the console is turned on.
 Keep the system and accessories, including cable ties and fasteners, out of the 
reach of small children.
AC adaptor and AC power cord use
 To help ensure safe operation, regularly inspect the AC adaptor and AC power 
cord. If damaged, stop use immediately and contact the appropriate PlayStation® 
customer service helpline which can be found within every PlayStation® and 
PlayStation®2 format software manual.
 Do not use a power cord other than the supplied AC adaptor and AC power cord.
 Check that there is no dust or lint on the power plug before inserting into an 
electrical outlet. If the plug becomes dirty, wipe it off with a dry cloth before 
connecting.
 Unplug the AC power cord from the electrical outlet before cleaning or moving the 
console, or when you do not intend to use the console for an extended period of 
time. When disconnecting, grasp the power cord by the plug and pull straight out 
of the electrical socket. Never pull by the cord and do not pull out at an angle.
 Do not connect the AC adaptor and/or AC power cord to a voltage transformer or 
inverter.
Notes on safety when using the Analog Controller 
(DUALSHOCK
®2)*
 Stop using the console immediately if you begin to feel tired or if you experience 
discomfort or pain in your hands or arms while operating the Analog Controller 
(DUALSHOCK
®2). If the condition persists, consult a doctor.
 The Analog Controller (DUALSHOCK®2) is intended for use with the hands only. 
Do not bring it into contact with your head, face or the bones of any other part of 
the body.
 The vibration function of the Analog Controller (DUALSHOCK
®2) can aggravate 
injuries. Do not use the vibration function if you have any ailment or injury to the 
bones, joints or muscles of your hands or arms. Note that some PlayStation
®2 and 
PlayStation® format software titles set the vibration function to On by default. In 
most cases, the vibration function can be set to Off in the options menu of the 
software. Do not play such titles using the Analog Controller (DUALSHOCK
®2) 
unless you have set the vibration function to Off. Avoid prolonged use of the Analog Controller (DUALSHOCK
®2). Take a break 
at about 30-minute intervals.
* These notes also apply to other controllers.
Connecting with a network cable
Do not connect network cables or telephone cords of the following types to the 
network connector:
 Standard residential telephone lines
 Network cables not appropriate for use with a 10Base-T/100Base-TX network
 Any ISDN (digital) compatible phone or data line
 PBX phone lines
 Other unknown types of telephone lines
Disc handling
 Do not touch the disc surface when handling a disc; hold it by the edges.
 Do not stick paper or tape onto discs and do not write on discs.
 Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce 
sound quality. Always handle carefully and make sure discs are clean before use.
 Do not leave discs near a heat source, in direct sunlight or in high humidity.
 Store discs in their cases when not in use - scratched and damaged discs will not 
function correctly.
 Clean discs using a soft cloth, lightly wiping from the centre outwards.
Do not use solvents such as benzine, commercially available cleaners not intended 
for CDs or anti-static spray intended for vinyl LPs.
 Do not leave a disc in the console when moving or changing the position of the 
console.
 Do not use irregularly shaped discs (for example, heart- or star-shaped discs) or 
damaged, re-shaped or repaired discs.
Never disassemble the console or supplied accessories
Use the PlayStation®2 console and accessories according to the instructions in this 
manual. No authorisation for the analysis or modification of the console, or the 
analysis and use of its circuit configurations, is provided. There are no user-
serviceable components inside the PlayStation
®2 console. Disassembling the 
console will void the guarantee. Additionally, there is a risk of exposure to laser 
radiation as well as to electrical shock hazards. 
						

							6Precautions
When connecting the console to a plasma or projection* TV
Do not leave a still image on the TV screen for an extended period of time, as this 
may leave a faint image permanently on the screen.
* Except LCD screen types
Note on safety when playing DVDs or CDs
If you set the volume too high, it may harm your hearing or damage the speakers. 
Exercise care when setting the volume.
Moisture condensation
If the console or disc is brought directly from a cold location to a warm one, moisture 
may condense on the lens inside the console or on the disc. Should this occur, the 
console may not operate properly. In this case, remove the disc and turn off and 
unplug the console. Do not put the disc back in until the moisture evaporates (this 
may take several hours). If the console still does not operate properly, contact the 
appropriate PlayStation
® customer service helpline which can be found within every 
PlayStation® and PlayStation®2 format software manual.
Cleaning
 For safety reasons, before cleaning the console or connected accessories, 1) turn 
off the console, 2) disconnect the power plug for the console from the electrical 
outlet, and 3) remove the network cable from the network connector.
 When cleaning the console, use a soft, dry cloth. Do not use paint thinner, solvents, 
other chemicals or a chemically-treated dust cloth to clean the product.
 When dust accumulates in the console vents, remove the dust with a low-powered 
vacuum cleaner.
 Do not touch the lens located inside the disc cover. To help protect the lens from 
dust, keep the disc cover closed except when inserting or removing discs.
Exterior protection
To help prevent damage to the painted parts, follow the precautions below:
 Do not spill liquids such as alcohol, benzine, paint thinner or other chemicals on 
the product.
 Do not place any rubber, vinyl or plastic items on the painted surfaces for an 
extended period of time.
FOR CUSTOMERS IN THE UNITED KINGDOM
Where you see either symbol on any of our electrical products, batteries or 
packaging, it indicates that the relevant electrical product or battery should not be 
disposed of as general household waste in Europe. To ensure the correct waste 
treatment of the product and battery, please dispose of them in accordance with any 
applicable local laws or requirements for disposal of electrical equipment/batteries. 
In so doing, you will help to conserve natural resources and improve standards of 
environmental protection in treatment and disposal of electrical waste.
This product contains a battery which is permanently built-in for safety, performance 
or data integrity reasons. The battery should not need to be replaced during the 
lifetime of the product and should only be removed by skilled service personnel.
To ensure the correct waste treatment of the battery, please dispose of this product as 
electrical waste. 
						

							7Getting started
Preparation
Check that you have all of the following items. If any items are missing, 
contact the appropriate PlayStation
® customer service helpline which can 
be found within every PlayStation
® and PlayStation®2 format software 
manual.You can place the console in either the horizontal or vertical position.
Horizontal position
Set the console horizontally.
Vertical position
When setting the console in the vertical 
position, use the SCPH-70110 E Vertical 
Stand (for PlayStation
®2) (sold separately).
Note
Some Vertical Stands (for PlayStation®2) cannot be used with this model of the 
PlayStation®2 console ( page 46). Choose the SCPH-70110 E when purchasing a 
Vertical Stand.
Preparation
Getting started
Checking the package contents 
sPlayStation®2 console...1sAnalog Controller 
(DUALSHOCK
®2)...1
sAC adaptor...1
sAC power cord...1sAV Cable...1
sEuro-AV connector plug 
(supplied with SCPH-79003)...1
sInstruction Manual...1
(supplied with SCPH-79002)
(supplied with SCPH-79003)
Positioning the console 
						

							8Part names
CautionDo not place the console in locations where it may be exposed to the following 
conditions:
 Places subject to excessive cigarette smoke or dust. Cigarette smoke residue 
or dust build-up on the internal components, such as the lens, may cause the 
console to malfunction.
 Places subject to extreme temperatures, in direct sunlight, near a heat source, 
or in a car with its windows closed (particularly in summer). These conditions 
may warp the exterior of the console or cause the console to malfunction.
 Places close to magnetic fields, such as those produced by magnets or 
loudspeakers.
 Places subject to vibration.
* The   product family logo can be rotated to match the horizontal or vertical 
positioning of the console.
Note
You can connect USB devices that are compatible with the PlayStation®2 console. 
Note, however, that not all USB-compatible products work with the PlayStation®2 
console. Refer to the instructions supplied with the device to be connected for more 
information.
Part names 
PlayStation®2 console front
RESET
Controller port 2  product family logo*
A (open) button
IR receiver
Front vent
 USB connector
MEMORY CARD slot 2
MEMORY CARD slot 1
Controller port 1]/1 (on/standby) indicator
]/1 (on/standby)/RESET button Disc cover 
						

							9Connecting to a TV
Preparation
Note
For part names of the Analog Controller (DUALSHOCK®2), see Using the Analog 
Controller (DUALSHOCK®2) ( page 17).
 Do not plug the AC power cord for the console into the electrical outlet 
until you have made all other connections.
 Check that the TV is turned off.
Connect the console to the TV as shown below.
PlayStation®2 console rear
Rear vent
! DC IN 8.5V 
connector
AV MULTI OUT connector DIGITAL OUT (OPTICAL) 
connector NETWORK connector
Connecting to a TV 
Before connecting 
Connecting to a TV using the supplied AV Cable
VIDEO L-AUDIO-R
Audio and video inputs of the TV
Do not use when 
connecting to a 
monaural TV.
AV CableConsole rear
White Red Yellow
To the AV MULTI 
OUT connector 
						

							10Connecting to a TV
CautionIf you display a still image on a plasma or projection* TV screen for an extended 
period of time, ghosting may occur. This is a characteristic of these types of 
TVs. Static, non-moving images, such as console setting menus, DVD menus or 
paused images, may leave a faint image permanently on the TV screen if left on 
for an extended time. Refer to the instructions supplied with your TV for details.
Note
The console can be connected to a VCR or an integrated TV/VCR. Note, however, 
that if you play a DVD with copy-protection encryption, picture quality may be 
reduced.
Connect your PlayStation®2 console to the Euro-AV connector (SCART) 
on the TV using the Euro-AV connector plug and AV Cable, making sure 
you match the colour-coded plugs of the AV Cable to the matching jacks 
of the connector plug.
After connecting
Set your TV to the appropriate video input mode. Refer to the Instruction 
Manual of your TV.
* Except those of LCD screen types
Connecting to a TV with a Euro-AV connector 
using the Euro-AV connector plug (SCPH-79003)
To Euro-AV 
connectorTo AV MULTI 
OUT connector
AV CableConsole rear
Euro-AV 
connector plug