Sony Projector Vpl Hs2 User Manual

 Video Projector          VPL-HS2
4-092-536-12 (1)
Video Projector
Operating Instructions __________________________________GB
Mode d’emploi ________________________________________FR
Manual de instrucciones _________________________________ES
© 2002 Sony Corporation
VPL-HS2 

VPL-HS2
GB 2
To prevent fire or shock hazard, do not expose 
the unit to rain or moisture.
To avoid electrical shock, do not open the 
cabinet.  Refer servicing to qualified personnel 
only. 
For the customers in the USA
If you have any questions about this product, you may 
contact:
Sony Electronics Inc.
Attn: Business Information Center (BIC)
12451 Gateway Boulevard
Ft. Myers, Florida 33913
Telephone No.: 800-686-7669
The number below is for FCC related matters only.
Declaration of Conformity
Trade...

3 GB
Table of Contents
Precautions ............................................. 4
Connections and Preparations
Unpacking ............................................... 5
Step 1: Installing the Projector  .............. 6
Before Setting Up the Projector  .........................6
Using the Optional Conversion Lens  .................7
Installing the Projector and a Screen  ..................8
Step 2: Connecting the Projector  ........ 10
Connecting with Video Equipment  ..................10
Connecting...

GB 4Precautions
Precautions
On safety
• Check that the operating voltage of your unit is 
identical with the voltage of your local power 
supply.
 Should any liquid or solid object fall into the 
cabinet, unplug the unit and have it checked by 
qualified personnel before operating it further. 
 Unplug the unit from the wall outlet if it is not to be 
used for several days. 
 To disconnect the cord, pull it out by the plug. Never 
pull the cord itself. 
 The wall outlet should be near the unit and...

Connections and 
Preparations
5 GB Unpacking
Connections 
and 
PreparationsUnpacking
Check the carton to make sure it contains the 
following items:
Remote control (1), 
Size AA (R6) 
batteries (2)
Signal interface 
cable (1)
Air filter (for 
replacement) (1)
Cinema filter (1)
Adjuster spacers (2)
AC power cord (1)
Operating Instructions (1)
Inserting the batteries into the remote 
control This section describes how to install the 
projector and screen, how to connect the 
equipment from which you want...

Connections and 
Preparations
GB 6Step 1: Installing the Projector
Step 1: Installing 
the Projector
You can obtain good picture quality even when you 
project the picture from the side of the screen (“Side 
Shot”) (1 page 9). You can enjoy home 
entertainment with this projector in various situations.
Enjoying home theater
Enjoying video games on a large screenWatching sports, etc. with your company
Before Setting Up the 
Projector
Do not place the projector in the following situations, 
which may cause...

Connections and 
Preparations
7 GB Step 1: Installing the Projector
Do not use the projector under the following 
conditions:
Tilting the unit extremely
Blocking the ventilation holes
Placing the projector without the adjuster
Note
Installing the unit at altitudes
When using the projector at an altitude of 1,500 m or 
higher, turn on high altitude mode in the INSTALL 
SETTING menu. Failing to set this mode when using 
the projector at high altitudes could have adverse 
effects, such as reducing the...

Connections and 
Preparations
GB 8Step 1: Installing the Projector
4 Turn the Conversion Lens clockwise.
Notes on installation of the optional Conversion Lens
 The Lens scratches easily, so when handling it, always place it 
gently on a stable and level surface in a horizontal position.
 Be sure not to bump the Lens on the surface of the lens of the 
projector.
 Avoid touching the Lens surface.
To remove the installed Conversion Lens
Turn the installed Lens counterclockwise 
until it can be removed....

Connections and 
Preparations
9 GB Step 1: Installing the Projector
f:Maximum vertical distance from the bottom 
of the screen to the center of the projector’s 
lens when you place the projector on the side 
(when you use projection distance b)
When projecting using both “Side Shot” 
and “V Keystone” adjustments
Position the projector with the lens end within 
the area   in the illustration, by using the 
values a to f in the table below as a guide.
Unit: m (feet)
Tip
The table shows the distances when...

Connections and 
Preparations
GB 10Step 2: Connecting the Projector
Step 2: 
Connecting the 
Projector
When making connections, be sure to do the 
following:
 Turn off all equipment before making any 
connections.
 Use the proper cables for each connection.
 Insert the cable plugs properly; plugs that are not 
fully inserted often generate noise. When pulling 
out a cable, be sure to pull it out from the plug, not 
the cable itself.
 Refer to the operating instructions of the connected 
equipment.
...