Sony Projector VPL-SW631C User Manual

11Connecting the Projector
Preparation
USB terminal (Type A) ( )
For connecting a USB wireless LAN module IFU-WLM3 (not supplied) (“Presentation 
Function via Network” (page 59)).
 Undesignated USB wireless LAN modules do not work.
 When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in 
Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.
 When wirelessly connecting a tablet PC/smartphone to the projector via USB wireless LAN...

12Connecting the Projector
VIDEO IN 
For connecting video equipment with a video output terminal.
INPUT A
For connecting video equipment with a YPBPR output terminal.
INPUT C
For connecting video equipment with an HDMI output terminal.
 Use HDMI-compatible equipment which has the HDMI Logo. 
 Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are 
recommended.)
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal 
or CEC...

13Connecting the Projector
Preparation
Microphone ( )
For connecting a microphone.
Only dynamic microphones are supported.
USB terminal (Type A) ( )
For connecting a USB memory device (“Using USB Media Viewer” (page 69)).
OUTPUT
Projected images or input audio can be output to display equipment such as a monitor or audio 
equipment such as speakers with a built-in amplifier.
Projected images and audio can be output.
Connecting a microphone
Note
Connecting a USB memory device
Connecting an External...

14Projecting an Image
BProjecting an Image
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install 
the projector so that the projected image fits the screen size. For details on projection distances 
and projected image sizes, see 
“Projection Distance and Lens Shift Range” (page 91).
 Project the image on a flat surface.
 Due to the characteristics of ultra short throw projector, the image may appear uneven on a 
projection surface that is not...

15Projecting an Image
Projecting an Image
(Example)
To project image files stored in a USB 
memory device, see “USB Media 
Viewer” (page 69). To play video and 
audio using USB Connection, see 
“Playing Video and Audio using USB 
Connection” (page 67). To use 
Presentation Function via Network, see 
“Presentation Function via Network” 
(page 59).
7Adjust the focus, size and position of 
the projected image (page 16).
Open the side cover, and adjust the lens 
shift dials, focus lever and zoom lever.
Open...

16Projecting an Image
Adjusting the Projected Image
Focus Size (Zoom)
Focus 
leverZoom 
lever 

17Projecting an Image
Projecting an Image
Position
(Lens shift)Position
Adjusting the tilt of the projector 
with the feet
You can adjust the height of the projector 
using the feet.
By changing the tilt of the projector with feet, 
you can adjust the position of the projected 
image.
 Be careful not to let the projector down on 
your fingers.
 Do not push hard on the top of the projector 
with the foot extended.
Lens shift 
dial V
For adjusting lens shift, turn each dial with 
your hand, screwdriver,...

18Projecting an Image
Changing the aspect ratio of the projected image
Press the ASPECT key on the remote commander to change the aspect ratio of the projected 
image. You can also change the setting in Aspect of the Screen menu (pages 23, 25).
Correcting trapezoidal distortion of the projected image (Keystone feature) 
If the image becomes trapezoidal, set the keystone manually. 
1Press the KEYSTONE key on the remote commander or select V Keystone in the Installation 
menu. 
2Use the V/v/B/b keys to set...

19Projecting an Image
Projecting an Image
Fitting the projected image to the screen (Digital Shrink adjustment)
If the projected image exceeds the size of the screen, you can shrink and adjust the position of it.
1Select “Rid. digitale” in the Installation menu.
2Set the shrinking rate.
Press the V/v/B/b key to adjust the value. The more the value increases towards the plus side, 
the smaller the projected image becomes.
3Press the ENTER button to display the shift adjustment menu and adjust the display...

20Projecting an Image
1Press the ?/1 key on the unit or the remote commander.
The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds 
again, shutdown is cancelled.
Do not turn off the projector soon after the lamp lights. It may cause a malfunction of the lamp 
(does not light ,etc.).
2Unplug the AC power cord from the wall outlet.
Turning off without displaying the confirmation message
Press and hold the ?/1 key on the unit for a few seconds (page 75).
If you turn off...