Sony Projector VPL-SW631C User Manual

21Using a MENU
Adjustments and Settings Using a Menu
BAdjustments and Settings Using a Menu
Using a MENU
The menu displays used for the explanation below may be different depending on the model you are 
using.
1Press the MENU key to display the 
menu.
2Select the setting menu. 
Use the V/v key to select the setting 
menu then press the b key or ENTER 
key.
3Select the setting item.
Use the V/v key to select the setting 
menu then press the b key or ENTER 
key.
To return to the selection screen of the...

22The Picture Menu
The Picture Menu
The Picture is used to adjust the picture for each input signal.
*1: For VPL-SW636C, only “Color Temp.” is available for the data drawn with the Interactive Pen 
Device using the PC Free Interactive function and in whiteboard mode. For the background 
image from the external device, all the setting items work (page 35).
*2: The settings in the Picture return to their factory defaults, except for Picture Mode.
*3: When a video signal is input, this option is available....

23The Screen Menu
Adjustments and Settings Using a Menu
The Screen Menu
The Screen menu is used to adjust the size, position and aspect ratio of the projected image for 
each input signal.
*1
Items Item descriptions
Aspect
*2Changes the aspect ratio of the projected image (page 25).
VPL-SW636C/
SW631C/SW631: 
When the computer 
signal is input4:3: Displays the image to fit the maximum projected image size 
with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size...

24The Screen Menu
*1: For VPL-SW636C, this setting is not available for the drawing data drawn with the Interactive 
Pen Device of PC Free Interactive function and whiteboard mode. This works only for the 
background image from the external device (page 35).
*2:   Note that if the projector is used for profit or for public viewing, modifying the original picture 
by switching to the aspect mode may constitute an infringement of the rights of authors or 
producers, which are legally protected.
 Depending...

25The Screen Menu
Adjustments and Settings Using a Menu
Aspect
VPL-SW636C/SW631C/SW631*1: If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “Full2,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: If you adjust the projected image position 
using an image with 16:9 aspect ratio and 
then switch the input source to 4:3 image, 
the...

26The Screen Menu
VPL-SX631*1: If you select “Normal,” the image is 
projected in the same resolution as the 
input signal without changing the aspect 
ratio of the original image.
*2: If you select “4:3,” the image is projected 
to fit the projected image size, regardless 
of the aspect ratio of the image.
*3: Depending on the input signal, the 
projected image may be projected as 
illustrated below. In this a case, select 
“16:9.”
*4: Depending on the input signal, the 
projected image may be projected...

27The Function Menu
Adjustments and Settings Using a Menu
The Function Menu
The Function menu is used for setting various functions of the projector.
*1: APA functions when a computer signal is input via the RGB input terminal (INPUT A/INPUT 
B).
*2: The maximum available mic volume is set by the value of “Volume.”
*3: Before performing the calibration, the message “Do you wish to start calibration?” will be 
displayed. If you select “Yes”, the projector performs the calibration.
*4: If you already have...

28The Function Menu
*6: When you display the menu while using the PC Free Interactive function, the PC Free Interactive 
function cannot be used for a while and the toolbars and drawing data will not be displayed. If 
you hide the menu, you can use the PC Free Interactive function again. If warning or notification 
messages etc. appear, you cannot use the PC Free Interactive function. For the settings of PC 
Free Interactive, see page 52.
*7: Images may not be projected properly depending on the...

29The Operation Menu
Adjustments and Settings Using a Menu
The Operation Menu
The Operation menu is used for setting for the operations by using the menu or the remote 
commander.
*1: You will not be able to use the projector if you forget your password. If you call qualified Sony 
personnel because you have forgotten the password, you will be asked to verify the projector’s 
serial number and your identity. (This process may differ in other countries/regions.) Once your 
identity has been confirmed, we...

30The Connection/Power Menu
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
Items Item descriptions
LAN Settings
IP Address 
Setup
*9Auto (DHCP): The IP address is assigned automatically from the 
DHCP server such as a router.
Manual: To specify the IP Address manually.
WLAN Settings
*10
WLAN 
Connection*8On/Off: Set the wireless output of the USB wireless LAN module (not 
supplied) to On/Off.
WLAN 
Network
*14Access Pt./Client *11: Changes modes for...