Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

About This Manual2-3
Chapter 2 - Features and Operation
Manual Format & Description
This diagram explains how the Features/Operations are organized in the following chapters 
and appendices. The manual format follows the basic outline as shown, but omits those 
elements that do not apply to a particular Feature or Operation.
Feature / Operation
Narrative to explain the feature/operation.
Sub-Feature / Operation
Description
Narrative to explain the sub-feature/operation.
Related Information
Programming...

2-4911 Feature
Chapter 2 - Features and Operation
911 Feature
Description
The 911 Feature allows stations in the system to dial 911 without using an access code. 911 
calls are placed on 911 marked lines. If all lines are busy, an existing call is dropped and the 
911 call is placed.
When this feature is enabled, Trunk Group/LCR Access Code 9 is not available.
Related Information
Programming Steps
To enable/disable the 911 feature:
1. Press the 911 FEATURE flexible button (FLASH 06, Button #13). The...

911 Feature2-5
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 (Page A) is lit. The following message displays to indicate current 
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press Button #15 to designate the line for 911 use.
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds and...

2-6911 Feature
Chapter 2 - Features and Operation
Operation
Station users and attendants can press the 911 ALERT flexible button as necessary to view 
additional 911 calls’ information in the stored list. After a station user or attendant views the 
information for all 911 calls in the system list:

All users’ LEDs change to a solid red indication.

The audible ringing tone at all stations ceases.

The LCDs at all stations revert to a normal display.
The list remains available for review by pressing the...

911 Feature2-7
Chapter 2 - Features and Operation
DEFAULT … Disabled
Conditions
» The 911 Feature (FLASH 06, Button #13) must also be enabled for the Proctor Integration 
to work.
» Only the lines connected to the Proctor should have the 911 Enable programmed 
(FLASH 40, Page A, Button #15).
» It is recommended to have a power failure procedure in place to ensure that 911 calls are 
always routed. Refer to FLASH 09, Button #7 for programming information.
Enhanced 911 Power Failure Station 
Description...

2-8Account Code
Chapter 2 - Features and Operation
Account Code
Description
An account code is the last field within Station Message Detail Recording (SMDR), that 
provides tracking capabilities for specific calls by entering a verified/non-verified, variable 
length (up to 12 digits) identifier.
The use of forced Account Codes is optional, offered on a system-wide basis. SMDR must be 
enabled to use account codes.
Related Information
Operation
When connected to an outside line call:
1. Press the...

Account Code2-9
Chapter 2 - Features and Operation
Programming Steps
1. Press ACCOUNT CODES flexible button (FLASH 05, Button #8) to determine whether the 
use of Account Codes is forced or optional.
2. Enter a 0 or 1 that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Account Codes are optional.
Operation
Prior to placing an outside line call:
1. Press the preprogrammed ACCOUNT CODE button.
2. Dial account code...

2-10Account Code
Chapter 2 - Features and Operation
Account Codes - Traveling COS ( Verified)
Description
The Verified Account Code/Traveling Class of Service (COS) feature provides the ability to 
track specific calls by entering a verified, variable length (up to 12 digits) identifier. Each 
account code can be assigned a day and night Class of Service for determining the dialing 
privileges allowed by that account code.
This feature provides a means for users to override a restricted station. If the...

Account Code2-11
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Verified Acct Codes are disabled.
To assign Verified Account Codes:
1. Press FLASH and dial [31]. The following message displays:
ACCT = Up to 12-digit account code
COS = Class of Service for account codes
2. Press the ACCT CODE flexible button (FLASH 31, Button #1). Enter up to 12 digits (0-9, *, 
#). [*] represents a do not care digit. The system ignores all digits after this digit...

2-12Account Code
Chapter 2 - Features and Operation
Operation
To use Verified Account Codes:
1. Press preprogrammed ACCOUNT CODE button before accessing a CO line.
2. Dial the account code up to 12-digits. If the account code matches a verified account 
code, intercom dial tone is returned. Otherwise an error tone is presented.
3. Access the outside CO line or dial the LCR code and dial the desired number.

SINGLE LINE TELEPHONE
To enter an Account Code before a call:
1. Lift the handset.
2. Dial...