Stiga Lawn Mower 8211 0324 02 Turbo 48S 55S Roller Owners Manual
Have a look at the manual Stiga Lawn Mower 8211 0324 02 Turbo 48S 55S Roller Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5898 Stiga manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 ENGLISHGB To replace the blade, undo the screw (fig. 27). Fit the new blade so that the stamped logo is turned up facing the blade holder (not facing the grass). Reinstall as illustrated. Tighten the screw properly. Tightening torque 40 Nm. When replacing the blade, the blade screw should also be replaced. The guarantee does not cover damage to the blade, blade holder or engine caused by running into obstacles. When replacing the blade, blade holder and blade screw, always use genuine spare parts. Non- genuine spare parts can entail a risk of injury or damage, even if they fit the machine. SHARPENING THE BLADES Sharpening of the blades must be done by wet method grinding, using a whetstone or a grindstone. For safety reasons, the blades should not be sharpenedonanemerywheel.Averyhigh temperature could cause the blades to become brittle. Once the blade has been sharpened, it must then be balanced to avoid vibration damage. STORAGE WINTER STORAGE Empty the fuel tank. Start the engine and let it run until it stops. The same petrol must not remain in the tank for more than one month. Tip up the mower and unscrew the spark plug. Pour a tablespoon of engine oil into the spark plug hole. Pull out the starter handle slowly so that the oil is distributed in the cylinder. Screw in the spark plug. Thoroughly clean the mower and store it indoors in a dry place. SERVICING Genuine spare parts are supplied by service workshops and by many dealers.
MOWING AHEAD GGP Sweden AB·Box 1006·SE-573 28 TRANÅS www.stiga.com